Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. All direct-detection sensors that support the windowed mode function can be used as retroreflective sensors (see Retroreflective Sensors).
Specifications:
General characteristics | Sensing range | 15 ... 200 mm | Adjustment range | 20 ... 200 mm | Blind spots | 0 ... 15 mm | Standard target plates | 100 mm x 100 mm | Transducer frequency | Approximately 400 kHz | Response delay | About 30 ms | Indicator/Action key | Yellow LED | Displays the illumination status
Flashing: Target detected under the TEACH-IN function | Red LED | Solid red light: An error occurred
Flashing red light: No target detected under the TEACH-IN function | Electrical characteristics | Operating voltage | 10 ... 30 V DC, ripple 10%SS | No-load current | ≤ 30 mA | input | Enter the type | 1 TEACH_IN input
Working distance 1: -UB ... +1 V, Working distance 2: +6 V ... +UB
Input impedance: > 4,7 kΩ TEACH-I pulse: ≥ 1 s | output | Output type | 1 switch output, PNP NO / NC, programmable | Rated operating current | 100 mA, short-circuit/overload protection | Default setting | Switching point A1 20 mm Switching point A2 200 mm | Voltage drop | ≤ 3 V | Repeatability | ≤ 1 % | Switching frequency | ≤ 13 Hz | Hysteresis range | 1% of set working distance | Temperature drift | ± 1,5 % of full-scale value | Licensing and Certification | UL recognized | cULus recognized, Class 2 power supply | CCC certified | Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark. | Surroundings | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical properties | Connection type | Connector M12 x 1, 4-pin | Ingress protection | IP67 | material | | | enclosure | Brass is nickel-plated | | Transducers | epoxy/hollow glass sphere mixture; Polyurethane foam, outer shell PBT | weight | 25 g |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Through-beam photoelectric sensor BB10-P/59/76b/103/115e
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F/Multi-line LED Scanner R2100 4-20mA analog output
Product Introduction: The R2100 Multi-Ray LED Scanner, also known as a 2D LiDAR sensor, combines pulsed ranging technology with ultra-infrared LEDs and multi-beam scanning to further advance the realm of possibilities. Multiple LED emitter elements arranged next to each other provide a two-dimensional surface with eleven points of light ...
|
|
P+F Capacitive Sensor CBN5-F46-E2-Y70121258
Introduction: P+F Capacitive sensor CBN5-F46-E2-Y70121258 rated working distance of 5 mm, non-flush mounting; DC 3 wire with additional wire for teaching; Flat housing; Fixing grooves for cable ties; Through-holes for screw mounting.
...
|
|
P+F/UB1000-18GM75-E5-V15
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
P+F Inductive Sensor NBB20-U1-A2 20mm flush
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Inductive sensor NBN4-12GM40-E0/E2 DC 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Print Marks Contrast Sensor DK12-11-IO/92/136 M12 plug
Introduction: Colour mark sensors can be used to detect registered trademarks in printing, converting, packaging, food, beverage, and pharmaceutical processes for sorting, positioning, and quality control of goods. The P+F color scale sensor is characterized by low contrast detection at high resolution, loud ...
|
|
P+F Isolation Barrier K Series 35mm DIN Rail
Introduction: The widely used K series intrinsically safe isolation grid adopts DIN rail installation, which is flexible and convenient. The intrinsically safe barriers of the K series can be easily plugged into the power rails assembled with the DIN rails. This installation method can greatly save ...
|
|
P+F/Sensor NBN4-12GM60-A2-V1 4 mm non-flush
Introduction: NBN4-12GM60-A2-V1 standard inductive sensor smooth or threaded stainless steel cylindrical housing; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, ...
|
|
P+F/Bi-material sensor UDC-18GM50-255S-3E0
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F inductive sensor NBN4-12GM60-A0 4mm
Introduction: Inductive proximity sensors are the product of choice for most applications that require high-precision, non-contact detection of metal targets in the field of mechanical instrumentation and automation equipment. As a market leader in this category, we offer our customers innovative, high-quality ...
|
|
P+F inductive sensor NBB0,6-3M22-E2 pulse
Description: P+F Inductive sensor NBB0,6-3M22-E2 pulse, nominal working distance: 0,6 mm, operating voltage: 10 ... 30 V, switching frequency: 0 ... 1400 Hz
peculiarity
0.6 mm, flush
Miniature design
Product parameters
...
|
|
P+F Inductive Positioning System PMI120-F90-IU-IO-V15
Introduction:P+F Inductive Positioning System PMI120-F90-IU-IO-V15 Reverse Polarity Protection, Analog Current or Voltage Output, Programmable; Linearity ranges from 1 to 119 mm; PBT, stainless steel 1.4571, brass, nickel-plated housing.
...
|
|
P+F/Double Sheet Sensor UDC-18GM50-255-3E1 Current < 65 mA
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Reflective sensor ML100-55/103/115a 7 m
Description: Retroreflective sensor ML100-55/103/115a photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/dark, DC, PNP output, fixed cable with M8 plug.
...
|
|
P+F/Magnetic field sensor 20FR1-6B voltage 250VDC
Summary: The magnetic field sensor family includes the M12 housing type for traditional magnetic detection applications. We also offer a non-contact piston detection sensor for use with steel hydraulic cylinders. These magnetic sensors reliably detect piston magnets and are easy to install without the need for hydraulic ...
|
|
P+F/Beam Ultrasonic Barrier UBEC300-18GH40-SE2-V1
Introduction: An ultrasonic through-beam sensor consists of a transmitter and a receiver mounted facing each other. Ultrasonic through-beam sensors work by emitting sound waves from the transmitter to the receiver to detect objects through the sound beam being interrupted by the target object. The emitter produces ultrasonic ...
|
|
P+F capacitive sensor CJ10-30GM-WO with a working distance of 10mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Optical Data Coupler DAD15-8P-R-2388 interface BASE-TX
Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two sites is replaced by infrared light, which is made up of several ...
|
|
Germany P+F/Bejiafu inductive sensor NBN30-U1K-N0 weight 225g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
Contact
working hours
