Introduction: Colour mark sensors can be used to detect registered trademarks in printing, converting, packaging, food, beverage, and pharmaceutical processes for sorting, positioning, and quality control of goods. The P+F color scale sensor is characterized by: low contrast detection at high resolution and short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. With a simple push of the TEACH-IN button, the emitter LED automatically selects the best color and automatically adjusts the trigger threshold.
Specifications:
Product Description | Contrast sensor with plastic lens, 9.5 mm detection range, RGB light (red, green, blue), on/off, external teach-in, NPN output, PNP output, M12 plug |
General characteristics | Sensor range | 9,5 mm ± 3 mm | The type of light source | LED | The type of light source | Visible green/red/blue light, modulated light | Flare manifestations | Rectangle 1 mm x 4 mm , | Functional safety parameters | Mean time to failure (days) | 650 a | Service life (...) Month... days) | 20 a | Scope of diagnosis | 0 % | Indicator/Action key | Function display | Yellow LED, knob operation: color scale is detected and the light is on, Teach operation: slow flashing, alarm display: fast flashing, unsafe operation | controller | TEACH-IN button | Electrical characteristics | Operating voltage | 10 ... 30 V DC | output | Switch type | Turn on when light/dark, switchable, in the order of teaching | Signal output | 1 PNP and 1 NPN, short circuit protection, open collector, synchronous switch | Conformity with the system of standards and norms | Meets standards | | | Product standards | EN Standard 60947-5-2:2007
IEC 60947-5-2:2007 | | Shock and shock resistance | IEC/EN 60068, half sinusoidal, 40 g in the X, Y, and Z directions | | Vibration-resistant | IEC/EN 60068-2-6, sine 10-150 Hz, 5 g in the X, Y, and Z directions | Mechanical properties | Ingress protection | IP67 | connect | 5-pin M12 x 1 connector | material | | | enclosure | PC (Makrolon, glass fiber reinforced) | | Optical end faces | plastics |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Retroreflective sensor GLV18-55-S/25/102/159
Introduction:P+F Retroreflective Sensor GLV18-55-S/25/102/159 Retroreflective Photoelectric Sensor with Polarization Filter, M18 Threaded Housing Design, Plastic Housing, Side Optical End, 3.5 m Detection Range, Red Light, Bright On, DC Type, NPN Output, M12 Plug ...
|
|
P+F/Gasford accelerometer F99 series measuring range -2~+ 2 g
Introduction: The F99 series of accelerometers is a complex mechanical system that uses accelerometers to ensure accurate real-time monitoring of the machine's vibrations. Accelerometers detect wear and tear on machine components and any critical operating conditions. Thus guaranteeing the execution of corrective actions to avoid potential damages.
|
|
P+F/Switching amplifier KCD2-SR-Ex1.LB 24 VDC
Introduction: Switching isolators supply power to proximity sensors in hazardous areas, receive proportional current, convert the input signal into a digital output signal, and transmit the switching signal to a control device such as a DCS or PLC. A switching isolator consists of three main components: power supply, transistor switch ...
|
|
P+F inductive sensor NBN4-12GM60-A0 4mm
Introduction: Inductive proximity sensors are the product of choice for most applications that require high-precision, non-contact detection of metal targets in the field of mechanical instrumentation and automation equipment. As a market leader in this category, we offer our customers innovative, high-quality ...
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Pixel Sensor GL30-RT / 32 / 40A / 98A Light/Dark
Product Introduction: Photocell Sensor, Zinc Die-Cast Housing, 30mm Slot Width, Red Light, Light/Dark, Sensitivity Regulator, DC Version, PNP Output, 3-Pin M8 Plug, Optimized for Detecting Small Parts, High Switching Frequency, Multi-Device Installation Possible, No Mutual Interference (No Crosstalk), Sensitivity ...
|
|
P+F through-beam photoelectric sensor OBE10M-18GM60-SE4-V1
Introduction: OBE10M-18GM60-SE4-V1 Thru-beam Photoelectric Sensor Two-color Indication LED; Bright/dark, programmable; Sensitivity regulator to ensure optimal application needs; Degree of protection IP67; Robust cylindrical metal housing M18 x 1.
...
|
|
P+F Inductive Sensor NBB20-U1-A2 20mm flush
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F Retroreflective Sensor ML100-55/95/102 5m detection range
Description: Retroreflective sensor ML100-55/95/102 photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, light/dark, DC type, NPN output, M8 plug.
...
|
|
P+F/Optical fiber optic sensor SU19.1/110/115 30μs
Product Introduction: Classic Series Fiber Optic Sensor with Display, Slave Module, Push-Pull Output, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) for Faster Teach-in, Combined Installation, Easy Wiring, Transparency Recognition, 30μs High Speed Mode.
...
|
|
P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Optical Data Coupler DAD15-8P Spring Terminals
Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two sites is replaced by infrared light, which is made up of several ...
|
|
P+F/Multi-line LED Scanner R2100 4-20mA analog output
Product Introduction: The R2100 Multi-Ray LED Scanner, also known as a 2D LiDAR sensor, combines pulsed ranging technology with ultra-infrared LEDs and multi-beam scanning to further advance the realm of possibilities. Multiple LED emitter elements arranged next to each other provide a two-dimensional surface with eleven points of light ...
|
|
P+F inductive sensor NBB0,6-3M22-E2 pulse
Description: P+F Inductive sensor NBB0,6-3M22-E2 pulse, nominal working distance: 0,6 mm, operating voltage: 10 ... 30 V, switching frequency: 0 ... 1400 Hz
peculiarity
0.6 mm, flush
Miniature design
Product parameters
...
|
|
P+F/Capacitive sensor CBN15-F64-A2 voltage drop ≤2V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, whether it is ...
|
|
P+F/Capacitive Proximity Sensor CBN15-F64-E2 15mm
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40A-SE2-V1
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F/Accelerometer ACX04-F99-I-V15 outputs 4 mA~20 mA
Product Introduction: The F99 series accelerometer monitors the strong vibration or acceleration of the wind turbine due to high winds. The sensor has a rugged, environmentally friendly housing and uses a non-contact, reliable detection principle to avoid critical situations.
Specifications:
...
|
|
Contact
working hours
