(1) The sealing pair is spherical, disc bias reversal planning The valve sealing pair is spherical and has a good sealing effect. Together with the disc rotation center is planned to have a bias with the center of the valve seat, so the valve disc and the valve seat constitute a sealing effect of the bias cam wedge when closed, and the valve ...

(1) Carefully check whether the valve type and specifications meet the requirements of the drawings. (2) Check whether the valve stem and disc are sensitively open, and whether there is any jamming and skewing. (3) Check whether the valve is damaged, and whether the thread of the threaded valve is correct and complete. (4) Check the valve ...

1. Before the equipment, you should carefully read the operation manual of the product, check whether the product can fully meet the application needs, understand the key to the equipment, and prepare for the operation. 2. Check whether the parameters marked on the nameplate can be the parameters of the selected product and whether they can be consistent with the instructions. 3. Acceptance ...

When the gate valve is closed, the sealing surface can only rely on the medium pressure to seal, that is, only rely on the medium pressure to press the sealing surface of the ram to the valve seat on the other side to ensure the sealing of the sealing surface, which is self-sealing. Most gate valves are forcibly sealed, that is, when the valve is closed, it is necessary to rely on external force to forcibly ...

Pneumatic cylinders and hydraulic cylinders are two common components in the mechanical field, both of which have the functions of transmitting energy and converting energy. Although the two seem to be similar, there are still great differences in the operating principle, application field, operation method, and application effect. ...

1. Confirm the working conditions: P1, △P, Q, T1, fluid characteristics, allowable noise, etc.; Select the appropriate ANSI pressure class for the body and trim requirements 2. Calculate the required initial Cv value, check the noise and cavitation levels 3. Select the type of trim of the control valve: if there is no noise ...

The flow rate and velocity of the valve mainly depend on the diameter of the valve, and are also related to the resistance of the structure of the valve to the medium, and at the same time have an intrinsic relationship with the pressure, temperature and concentration of the medium of the valve. Two...

The biggest difference between the electric single-seat conditioning valve and the electric sleeve conditioning valve lies in the performance and application, but both have their own advantages and shortcomings, and the advantages of one may be the lack of the other, which can complement each other and be used in different occasions. There is no difference in appearance, first of all, the two ...

The selection of control valve is a very complex thing, in order to ensure the use of control valves, customers only need to provide process parameters and use requirements to valve manufacturers, because valve manufacturers have rich experience in valve use, so they can provide customers with the best cost-effective valve products. ...

The control valve, also known as the control valve, is a device in the field of industrial automation process control that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the pipeline medium.

In the process of use, several problems are usually presented in the direction of (FO, FC, FL), and the "fault" in the valve fault closing/obstacle opening refers to: the action of the valve when the gas source is gone. For the fault location of pneumatic valves, it is mainly divided into several situations: ...

Pneumatic butterfly valve additional code: BD insulation butterfly valve, SD telescopic butterfly valve, TLD desulfurization butterfly valve, DH check butterfly valve, DKS fast butterfly valve, FDBD square louver butterfly valve; Butterfly valve code: D indicates butterfly valve Transmission code: manual ...

The conditioning valve, also known as the control valve, is a device that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the conditioning pipeline medium in the field of industrial automation process control. It is mainly composed of the operating fulfillment mechanism and the regulating valve body, which receives relevant signals and changes the opening of the valve.

(1) The direction of the thermal relay device shall be the same as the specified direction, and the general inclination shall not exceed 5°. If it is installed with other electrical appliances, it should be installed under other electrical appliances as much as possible to avoid the influence of heat generation from other electrical appliances. (2) When wiring the device, check whether the wiring is correct, ...

Valve is a kind of commonly used hardware products, the valve also has certain skill requirements before assembling and in the process of installation, otherwise the assembled valve is unlikely to show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

The mechanical deflection angle of the movable part of the surface can be measured and converted, and the size to be measured is directly indicated by the indicator, so it is also called the direct-reading appearance. According to the working principle, the indication surface can be divided into magnetoelectric system appearance, electromagnetic system appearance, electric system appearance and ...

1. Remove the nut and identification plate at the upper end of the valve stem, and look at the lock nut raw material inside, the raw material is brass, otherwise it is a counterfeit product. 2. Look at the steel seal, the valve steel seal is pressed on it before the valve has passed the heat treatment, and the professional steel seal skills are used.

The actuator of the control valve has pneumatic type, electric type and electro-hydraulic linkage type, and the pneumatic equipment is divided into barrier type and cylinder type. Depending on the action when the operating signal and the drive source disappear, the actuator has a forward type, a reverse type, a non-directional type, and a persistent type. The positive type is used in the operation signal and drive ...

The self-operated control valve, also known as the self-operated control valve, is based on the pressure and temperature of the medium flowing through the valve itself as an energy source, and uses the reaction signal (pressure, pressure difference, temperature) at the output end of the valve to be transmitted to the actuator through the signal tube, and then drives the valve disc and then changes the opening of the valve to achieve the adjustment pressure.

Nuclear power valves are essentially the same as those used for thermal power generation, with gate valves mainly used for high-pressure large-diameter piping, butterfly valves for low-pressure large-diameter piping, and most of the auxiliary piping for small-diameter shut-off valves or angle globe valves. Check valves, safety valves and control valves etc. are also related to other collar valves.

1. According to the requirements of different flow characteristics, the electric sleeve control valve can be easily replaced with a linear flow characteristic sleeve or an equal percentage of flow characteristic sleeve, and can replace the sleeve with different flow capacity according to the different requirements of flow size. 2. Electric sleeve simple control valve in high temperature ...