On December 2, 2019, the China-Russia East Route Natural Gas Pipeline Project was officially put into operation. The large-diameter pressure regulator jointly developed and manufactured by Wu Zhong and China Petroleum Pipeline Branch was put into use at Changling Natural Gas Transmission Station in Jilin Province and successfully ventilated. ...

　　First, the effect of pipeline identification Why do you need to do pipeline identification? Intent: To facilitate the identification of substances in industrial pipelines, ensure safe production, and avoid misjudgment in operation and equipment maintenance. Carry out ...

1. Accounting for traffic The calculation of the flow rate can also be confirmed by referring to the capabilities of fluid handling machinery such as pumps and compressors. Sometimes, a combination of methods is used to confirm. 2. Confirmation of the differential pressure (1) Put the conditioning valve before and after ...

The correct use of thermocouples can not only accurately obtain the temperature value to ensure that the product is qualified, but also save the data consumption of thermocouples, which can not only save money but also ensure product quality. Incorrect devices, thermal conductivity and moment lag are the first errors in the use of thermocouples.

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to restrain the lever from deviating, and the tension spring safety valve should have the equipment to improve the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

(1) The conditioning valve belongs to the on-site dashboard, and the regular working temperature should be in the range of -25-60 °C, and the air humidity should be ≤ 95%. If it is installed outdoors or in a high-temperature place, moisture-proof and temperature-reducing measures should be used. In areas where there is an epicenter, it is necessary to eradicate the source of vibration or improve vibration isolation measures. ...

Wuzhong is a leading enterprise in China's process industry automatic control valve industry, founded in 1959, a national third-line construction enterprise. The company has always adhered to the concept of professionalism, dedication, innovation and transcendence.

The normal operation of the appearance is inseparable from the protection of the site, especially some important process links, once there is a leak, it will greatly affect the quality of the product, resulting in heavy losses. First of all, on important tanks in general ...

For valves in operation, all kinds of valves should be complete and defective. For example, the bolts on the flange and bracket should not be short, and the threads should be free of defects, and no loosening is allowed. The fastening nut on the handwheel, if found to be loose, should be ...

Valves are the most common equipment in chemical enterprises and play a great role. They seem to be simple and easy, but in the actual operation process, they also need to meet the relevant technical requirements, otherwise they will cause safety accidents. Only the valves related to our liquid level appearance are introduced here, and other equipment is not analyzed. ...

The hydraulic maintenance module uses the hydraulic locking method to control the inlet and outlet oil circuits and load oil circuits of the electro-hydraulic servo valve. The module has the following three functions: 1. Locking function When the system is in normal condition, the hydraulic lock is in the guide...

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to limit the lever from deviating, and the spring-type safety valve should have the equipment to raise the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

　　Technical characteristics of single eccentric sealed butterfly valve In order to solve the extrusion problem of the butterfly plate and the valve seat of the concentric butterfly valve, a single eccentric butterfly valve is produced, and its structural characteristics are that the shaft of the valve stem deviates from the center of the butterfly plate, so that the upper and lower ends of the butterfly plate are not ...

Classification of valves, types of structures, functional applications, pressure levels, temperature classifications, valve body data classifications, and general classifications The types of valve products are complex, and the statements are inconsistent, some are divided according to the use (such as chemical valves, oil valves, oilfield valves, power station valves, etc.), and some are according to the medium.

1. Valve body assembly The valve body assembly shall have the following elements: structural type, nominal diameter, nominal pressure, connection type with pipeline, applicable temperature scale, raw materials of valve body and internals, valve seat diameter or rated flow coefficient, flow characteristics, valve seat leakage grade, etc. ​ ...

1. High-precision operation, can complete rapid palletizing and destacking operations. (1). The conditions of the process Factors such as temperature, pressure, flow, viscosity, corrosiveness, toxicity, pulsation and other factors in the process determine the appearance of the ...

1. The hydraulic power in the hydraulic ball valve should refer to the opening mode of the valve as hydraulic, which refers to the valve opening device. The latter ball valve refers to the valve type as a valve type and a shut-off valve class. Two: Type Q61N can explain Q as ...

Routine maintenance of pneumatic conditioning valves When the conditioning valve is packed with graphite-asbestos, lubricating oil should be added to the packing once in about three months to ensure that the conditioning valve is flexible and easy to use. If it is found that the pressure cap of the packing is very low, the packing should be compensated, such as the PTFE dry packing is found to be hardened ...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is commonly used for mediation. Due to the conditioning application, the valve seal has been in a saving state for a long time, and the impurities in the oil have washed the seal, damaging the seal.

1. Pole change speed regulation This speed regulation method is to change the number of stator pole pairs of the cage motor to achieve the speed regulation intention by changing the wiring method of the stator winding, and the characteristics are as follows: it has hard mechanical characteristics and good stability; No slip loss, high power; The wiring is simple, the operation is convenient, and the price is ...

There are two main reasons for the leakage of cryogenic valves, one is internal leakage; The second is leakage. 1) Internal leakage of the valve The main reason is the deformation of the sealing pair at low temperature. When the temperature of the medium drops to the point where the data undergoes a phase change, the volume changes ...