Inspection of the valve before installation

1. System overview The valve automatic control system controls the solenoid valve equipment placed in the field by announcing the instructions of the control service center in a wireless way, and then realizes the opening and closing of the solenoid valve, and the opening and closing status of the valve, the operation status, whether the equipment is online, historical data inquiry, etc.

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

1. The valve position of the electric actuator is lost: 1) Battery power is lost When the incremental encoder is selected to measure the stroke, it is necessary for the fulfillment mechanism to have a battery as an auxiliary power supply, the AC power supply disappears, and the change of the valve position of the electric actuator can still be detected by the incremental encoder.

In all kinds of mechanical connectors, the anti-loosening of bolts is a very important link. So can the tension spring washer be loosened? The principle of anti-loosening of the tension spring washer The anti-loosening principle of the tension spring washer is that after flattening the tension spring washer, the tension spring ...

1. Confirm the selection criteria (1) Process fluid conditions: fluid name, flow rate, inlet and outlet pressure, pressure difference during normal operation, pressure difference when valve is closed, fluid temperature, specific gravity, viscosity, whether there are suspended solids, fibrous, muddy, etc. Sometimes it is possible to part with the most ...

(1) Check whether there is loosening in the multistage pump pipeline and joint. Turn the multistage pump by hand to see if the multistage pump is sensitive. (2) Lubricate the bearing oil in the bearing body, observe the oil level at the center line of the oil standard, and replace or replenish the lubricating oil in time. (3)、 ...

1) Casting: a kind of data molding method. The molten metal liquid is placed into the mold of the desired shape, allowed to condense, cooled and then removed from the product. 2) Forging: After heating the metal profile ...

It is composed of a pneumatic O-type shut-off ball valve and a pneumatic double-acting actuator. It has the advantages of simple structure, small size, light weight, convenient operation, etc., and can be widely used in automatic conditioning and long-distance control of industrial production processes such as petroleum, chemical industry, hydropower, and textile. ...

In the process of use, several problems are usually presented in the direction of (FO, FC, FL), and the "fault" in the valve fault closing/obstacle opening refers to: the action of the valve when the gas source is gone. For the fault location of pneumatic valves, it is mainly divided into several situations: ...

1. Impurities are stuck on the sealing surface of the valve The valve is sometimes closed suddenly, it may be that there are impurities stuck between the sealing surface of the valve, at this time should not be forced to close, the valve should be opened slightly larger, and then try to close, try repeatedly, it can generally be eliminated, otherwise it should be checked again...

1. According to the requirements of different flow characteristics, the electric sleeve control valve can be easily replaced with a linear flow characteristic sleeve or an equal percentage of flow characteristic sleeve, and can replace the sleeve with different flow capacity according to the different requirements of flow size. 2. Electric sleeve simple control valve in high temperature ...

Valve is a kind of commonly used hardware products, the valve in the assembly and installation process also has a certain skill requirements, otherwise the assembled valve may not show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

Solenoid valve is an industrial equipment controlled by solenoids, and is a basic element of automation used to control fluids, which belongs to actuators and is not limited to hydraulics and pneumatics. It is used in industrial control systems to adjust the direction, flow rate, speed and other parameters of the medium. Solenoid valves can be used with different circuits to ...

A few days ago, in a large digital workshop of Wuzhong Instrument Co., Ltd., the operators were working carefully. Every day, tens of thousands of parts orders are sent from dozens of sales outlets across the country such as Guangzhou and Hainan, and nearly 200 pieces of equipment in the workshop are processed and produced. 　　Because of the working conditions ...

1. The hydraulic power in the hydraulic ball valve should refer to the opening mode of the valve as hydraulic, which refers to the valve opening device. The latter ball valve refers to the valve type as a valve type and a shut-off valve class. Two: Type Q61N can explain Q as ...

"Pass" and "position" are important concepts of pneumatic reversing solenoid valves. Different "passes" and "positions" constitute different types of pneumatic reversing solenoid valves. Generally speaking, the "two-position valve" and "three-position valve" refer to the valve core of the reversing valve with two or three different operating directions. The so-called "two links" ...

(1) The conditioning valve does not operate. The symptoms and causes are as follows: 1. No signal, no air source. (1) The air source is not opened, (2) because the water contained in the air source freezes in winter, resulting in the blockage of the air duct or the blockage of the filter and pressure reducing valve, (3) the compressor is faulty; (4) Leakage of air source main pipe. 2． ...

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to restrain the lever from deviating, and the tension spring safety valve should have the equipment to improve the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

1. In the case of interlocking action of pneumatic valve equipment, the valve orientation should have the following situations: The EC air supply is discarded and the valve is in a closed position FO__ air source is discarded, and the valve is in the opening position FL-_ The air source is lost, and the valve is in the time position and has been insisting FL ...

1. Pole change speed regulation This speed regulation method is to change the number of stator pole pairs of the cage motor to achieve the speed regulation intention by changing the wiring method of the stator winding, and the characteristics are as follows: it has hard mechanical characteristics and good stability; No slip loss, high power; The wiring is simple, the operation is convenient, and the price is ...