1. Why does the double-seat valve vibrate briefly during small opening operation For a single core, when the medium is a flow-open type, the valve has good stability; When the medium is a flow-closed type, the stability of the valve is poor. The double-seat valve has two spools, the lower spool is in the flow closed and the upper spool is in the flow open, so that in the small opening ...

1. According to the use occasion and use of the valve, confirm the driving method: manual, electric, pneumatic, and hydraulic. 2. Selection of manual methods: The standard of ball valve and butterfly valve "DN150 can be driven by a handle; Standard DN200 should be used to drive worm gearbox. b. Gate valve ...

The structure of the adjustable pressure reducing valve is composed of a main valve, a pressure feedback system, and a control pipeline. The main valve is composed of main parts such as valve body, diaphragm seat, valve cover, diaphragm, valve stem, valve plate, etc. The adjustable pressure reducing valve is installed on the one-way water supply pipeline in the city, which can reduce the upstream (inlet) pressure of the higher valve.

(1) Selection process (1) Clarify the purpose of the valve in the equipment or equipment, and confirm the operating conditions of the valve: applicable medium, operating pressure, operating temperature, etc. (2) Confirm the nominal diameter and connection method of the pipeline connected to the valve: flange, thread, welding, etc. ...

There are currently four types of actuators, which are capable of operating various types of valves with different driving forces. 1. Electric multi-reverse executive organization Electrically driven multi-reversal executive organizations are one of the most commonly used and reliable types of executive organizations. Wield...

1. Leakage of stuffing box This is the primary aspect of running, running, dripping and leaking, which is often seen in the factory. There are several reasons why stuffing box leaks occur: (1) The corrosiveness, temperature and pressure of the filler and the working medium are not suitable; (2) The filling method is wrong, especially the whole filler ...

1. Impurities are stuck on the sealing surface of the valve The valve is sometimes closed suddenly, it may be that there are impurities stuck between the sealing surface of the valve, at this time should not be forced to close, the valve should be opened slightly larger, and then try to close, try repeatedly, it can generally be eliminated, otherwise it should be checked again...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is widely used for mediation. Due to the conditioning application, the valve seal is in a throttling state for a long time, and the impurities in the oil wash the seal, damaging the seal.

The angular displacement of the valve position detected by the valve limit switch box changes the transmission shaft through the coaxial adjacency or the reaction rod, so that the cam touches the miniature switch, so that the contact of the switch assembly is closed or disconnected, and the switching signal is transmitted to the outside through the terminal, and the passer is displayed on the spot. ...

(1) Under normal circumstances, the valve is not tested for strength, but after repair, the valve body and bonnet or the valve body and bonnet damaged by corrosion should be tested for strength. For safety valves, their constant pressure and return pressure and other experiments should be in accordance with their instructions and the rules of the relevant procedures. ...

There are a total of eight functions of the conditioning valve, and the eight functions of the full-function ultra-light conditioning valve are excellent, so it is called "full-function valve". 1. The conditioning function is one of the main functions of the conditioning valve, which is manifested as (1) flow characteristics; (2) Adjustable ratio R; ...

1. The valve positioner is divided into pneumatic valve positioner, electrical valve positioner and intelligent valve positioner according to the input signal. (1) The input signal of the pneumatic valve positioner is a standardized gas signal, for example, the 20-100kPa gas signal, and its output signal is also a standardized gas signal. （ ...

Pneumatic ball valves are ball valves with pneumatic actuators. The detailed classification of pneumatic ball valves includes: stainless steel pneumatic ball valves, plastic pneumatic ball valves, sanitary pneumatic ball valves, carbon steel pneumatic ball valves, two-way pneumatic ball valves, three-way pneumatic ball valves, and four-way pneumatic ball valves. ...

Product features of pneumatic conditioning stainless steel butterfly valves: 1. Simple, small size, light weight, small flow resistance, large flow coefficient and good sealing performance. Large conditioning range. It is the fulfillment unit of the instrument in the automatic control system. 2、 ...

1. Corrosion of valves is usually understood as the damage to the metal materials of valves under chemical or electrochemical environmental effects. Because the corrosion phenomenon occurs in the spontaneous interaction between the metal and the surrounding environment, therefore, how to block the metal from the surrounding environment or more use of non-...

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

Valve is a kind of commonly used hardware products, the valve in the assembly and installation process also has a certain skill requirements, otherwise the assembled valve may not show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

Valves are control components in fluid transportation systems, which have the functions of shut-off, regulation, diversion, prevention of backflow, pressure stabilization, diversion or overflow pressure relief. Valves for fluid control systems, from the simplest shut-off valves to the most complex valves used in automated control systems, are available in a variety and size.

Valve is a kind of commonly used hardware products, the valve also has certain technical requirements before assembling and in the process of the device, otherwise the assembled valve may not reflect its own excellent function, what are the technical requirements of the valve in the assembly process? ...

1. System overview The valve automatic control system controls the solenoid valve equipment placed in the field by announcing the instructions of the control service center in a wireless way, and then realizes the opening and closing of the solenoid valve, and the opening and closing status of the valve, the operation status, whether the equipment is online, historical data inquiry, etc.

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. Double blocking and discharge function of turbine fixed ball valve: the turbine ball valve is fixed by using tension spring preload floating valve seat, when the valve is in two different states, fully open and fully closed, the fluid is ...