Identify the valve refurbishment method - Wuzhong instrument

Valve is a kind of commonly used hardware products, the valve also has certain skill requirements before assembling and in the process of installation, otherwise the assembled valve is unlikely to show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

(1) The conditioning valve does not operate. The symptoms and causes are as follows: 1. No signal, no air source. (1) The air source is not opened, (2) because the water contained in the air source freezes in winter, resulting in the blockage of the air duct or the blockage of the filter and pressure reducing valve, (3) the compressor is faulty; (4) Leakage of air source main pipe. 2． ...

A safety valve is an automatic valve that uses the medium's own force to expel an additional amount of fluid without any external force to avoid the pressure exceeding the additional safety value. When the pressure has recovered to normal, the valve closes again and prevents the continuous flow of the medium. (TSG ZF001-2006)

1. Confirm the selection criteria (1) Process fluid conditions: fluid name, flow rate, inlet and outlet pressure, pressure difference during normal operation, pressure difference when valve is closed, fluid temperature, specific gravity, viscosity, whether there are suspended solids, fibrous, muddy, etc. Sometimes it is possible to part with the most ...

Cryogenic valves are mainly used in ethylene, liquefied natural gas equipment, air separation equipment, petrochemical tail gas separation equipment, liquid oxygen, liquid nitrogen, liquid argon, carbon dioxide cryogenic storage tanks and tankers, pressure swing adsorption oxygen production and other equipment, the main varieties are cryogenic ball valves, cryogenic globe valves, etc. ...

1. The hydraulic power in the hydraulic ball valve should refer to the opening mode of the valve as hydraulic, which refers to the valve opening device. The latter ball valve refers to the valve type as a valve type and a shut-off valve class. Two: Type Q61N can explain Q as ...

There are currently four types of actuators, which are capable of operating various types of valves with different driving forces. 1. Electric multi-reverse executive organization Electrically driven multi-reversal executive organizations are one of the most commonly used and reliable types of executive organizations. Wield...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is commonly used for mediation. Due to the conditioning application, the valve seal has been in a saving state for a long time, and the impurities in the oil have washed the seal, damaging the seal.

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

Pneumatic butterfly valves are usually composed of a combination of pneumatic actuators and valve bodies and some accessories after debugging. This article first introduces the precautions for the on-site application of pneumatic butterfly valves. 1. The control cabinet sends a signal that the valve does not move, and the pneumatic conditioning butterfly valve is in the device locator after on-site investigation.

The self-operated control valve, also known as the self-operated control valve, is based on the pressure and temperature of the medium flowing through the valve itself as an energy source, and uses the reaction signal (pressure, pressure difference, temperature) at the output end of the valve to be transmitted to the actuator through the signal tube, and then drives the valve disc and then changes the opening of the valve to achieve the adjustment pressure.

The selection of control valve is a very complex thing, in order to ensure the use of control valves, customers only need to provide process parameters and use requirements to valve manufacturers, because valve manufacturers have rich experience in valve use, so they can provide customers with the best cost-effective valve products. ...

The normal operation of the appearance is inseparable from the protection of the site, especially some important process links, once there is a leak, it will greatly affect the quality of the product, resulting in heavy losses. First of all, on important tanks in general ...

1. The sealing surface is uneven and cannot constitute a sealing line: 2. The connection between the valve stem and the closure is suspended, irregular or worn; 3. The valve stem is tortuous or the assembly is not correct, so that the closure is skewed or mismatched: Fourth, the sealing surface raw materials are not selected properly or not according to the working conditions.

(1) The sealing pair is spherical, disc bias reversal planning The valve sealing pair is spherical and has a good sealing effect. Together with the disc rotation center is planned to have a bias with the center of the valve seat, so the valve disc and the valve seat constitute a sealing effect of the bias cam wedge when closed, and the valve ...

First, there is a leak in the safety valve. The industry said that when there is a small leakage in the safety valve, it is generally not easy to find, but even a small leakage point will expand in the erosion. The test method is to test ...

The mechanical deflection angle of the movable part of the surface can be measured and converted, and the size to be measured is directly indicated by the indicator, so it is also called the direct-reading appearance. According to the working principle, the indication appearance can be divided into magnetoelectric ...

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to limit the lever from deviating, and the spring-type safety valve should have the equipment to raise the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

The slag lock valve (bucket valve) is specially designed for the complex working conditions of coal gasification, and is a special hard seal ball valve that can adapt to high temperature, high pressure and high wear resistance working conditions. The slag locking valve is mainly used to solve the problem of coal slurry feeding in the gasification unit and the common problem of medium scaling in the valves used in the black water process pipeline.

Nuclear power valves are essentially the same as those used for thermal power generation, with gate valves mainly used for high-pressure large-diameter piping, butterfly valves for low-pressure large-diameter piping, and most of the auxiliary piping for small-diameter shut-off valves or angle globe valves. Check valves, safety valves and control valves etc. are also related to other collar valves.