Pneumatic butterfly valve model representation method - Wuzhong instrument

Scientific and technological innovation, Wuzhong Instrument has gone through a road of deep integration of informatization and industrialization. "There are too many foreign 'stuck neck' technical products. The control valve industry is all-encompassing, with 100,000 varieties and specifications, more than 1 million parts, and more than 5,000 quality control points.

1. The valve positioner is divided into pneumatic valve positioner, electrical valve positioner and intelligent valve positioner according to the input signal. (1) The input signal of the pneumatic valve positioner is a standardized gas signal, for example, the 20-100kPa gas signal, and its output signal is also a standardized gas signal. （ ...

Pneumatic control valve is one of the instruments widely used in petrochemical enterprises. It is of great significance to ensure the normal operation and safe production of the process equipment by operating accurately and normally. Therefore, it is necessary to strengthen the maintenance of pneumatic control valves. First, the key points to check the location during maintenance ...

1. Smooth mechanism Smoothing is to add a smoothing agent between the two conflict surfaces of relative motion, so that a smooth film is formed between the two conflict surfaces, and the dry conflict appearance that is originally directly touched is separated, and the dry conflict is a conflict between the smooth agent molecules, so as to reduce the conflict and reduce wear, ...

The structure of the adjustable pressure reducing valve is composed of a main valve, a pressure feedback system, and a control pipeline. The main valve is composed of main parts such as valve body, diaphragm seat, valve cover, diaphragm, valve stem, valve plate, etc. The adjustable pressure reducing valve is installed on the one-way water supply pipeline in the city, which can reduce the upstream (inlet) pressure of the higher valve.

For valves, it is necessary not only to be able to install and regularly maintain and maintain, but also to be able to operate. Under normal circumstances, the opening and closing of the valve follows the principle of "reverse opening and closing", that is, the counterclockwise rotating handwheel is an open valve, and the clockwise rotating handwheel is a closed valve. ...

The active circulation valve is a pump protection device. It actively protects the centrifugal pump (especially the hot water medium) from partial cavitation damage and instability that may occur in the pump body when operating at low load. Once the pump flow rate falls below the preset flow, the bypass is completely opened to ensure that the pump needs a small flow rate. Namely...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from dispatching according to their structural characteristics. However, in process design, it is widely used for mediation. Because of the scheduling application, the valve seal has been in a throttling state for a long time, and the impurities in the oil have washed the seal, endangering the seal.

Solenoid valve is an industrial equipment controlled by solenoids, and is a basic element of automation used to control fluids, which belongs to actuators and is not limited to hydraulics and pneumatics. It is used in industrial control systems to adjust the direction, flow rate, speed and other parameters of the medium. Solenoid valves can be used with different circuits to ...

1. When the sealing surface is grinding, the grinding tools, abrasives, abrasive cloth and sandpaper and other objects should be selected in a reasonable grinding method, and the coloring inspection should be carried out after grinding, and the sealing surface should be free of indentations, cracks, scratches and other shortcomings; Second, the connection between the valve stem and the closure should meet the planning requirements, and the top center is not suitable.

Insist on the cleanliness of valves and actuators as much as possible. The valve is drained after the flow test. During storage and installation, it is important to avoid the ingress of contaminants. Assuming that there is a problem, check it according to the instructions. Do not use a crowbar or an excessively large ...

The hydraulic maintenance module uses the hydraulic locking method to control the inlet and outlet oil circuits and load oil circuits of the electro-hydraulic servo valve, and the module has the following three functions: 1. Locking function When the system is in normal condition, the hydraulic lock is in the guide ...

(1) Check whether there is loosening in the multistage pump pipeline and joint. Turn the multistage pump by hand to see if the multistage pump is sensitive. (2) Lubricate the bearing oil in the bearing body, observe the oil level at the center line of the oil standard, and replace or replenish the lubricating oil in time. (3)、 ...

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

Pneumatic ball valves are ball valves with pneumatic actuators. The detailed classification of pneumatic ball valves includes: stainless steel pneumatic ball valves, plastic pneumatic ball valves, sanitary pneumatic ball valves, carbon steel pneumatic ball valves, two-way pneumatic ball valves, three-way pneumatic ball valves, and four-way pneumatic ball valves. ...

　　Technical characteristics of single eccentric sealed butterfly valve In order to solve the extrusion problem of the butterfly plate and the valve seat of the concentric butterfly valve, a single eccentric butterfly valve is produced, and its structural characteristics are that the shaft of the valve stem deviates from the center of the butterfly plate, so that the upper and lower ends of the butterfly plate are not ...

1. According to the processing requirements, some parts need to be polished, and there can be no processing burrs on the appearance; 2. All parts are degreased; 3. After the degreasing is completed, pickling and passivation will be carried out, and the cleaning agent does not contain phosphorus; 4. Rinse with pure water after pickling and passivation.

Valves are control components in fluid transportation systems, which have the functions of shut-off, regulation, diversion, prevention of backflow, pressure stabilization, diversion or overflow pressure relief. Valves for fluid control systems, from the simplest shut-off valves to the most complex valves used in automated control systems, are available in a variety and size.

1. Introduction to gate valves Gate valve refers to the valve in which the opening and closing parts (rams) move in the straight direction of the medium (channel axis) to complete the opening and closing. Among the various types of valves, gate valves are the most widely used one. Gate valves are mainly used as shut-off medium in pipelines, i.e. ...

The correct use of thermocouples can not only accurately obtain the temperature value to ensure that the product is qualified, but also save the data consumption of thermocouples, which can not only save money but also ensure product quality. Incorrect devices, thermal conductivity and moment lag are the first errors in the use of thermocouples.