FANUC will bring four sets of robotic automation solutions that integrate 3D vision, smart logistics, and Internet of Things technologies to double the efficiency of goods sorting, picking, and destacking. 3D Vision Express Tracking and Sorting System 3D visual tracking, which can cope with small batches, multi-variety ...

FANUC is proud to launch the new heavy-duty intelligent robot M-1000iA, which can handle 1000kg, and the robot can reach a radius of 3252mm. The M-1000iA features a new mechanical design that allows the robot to be more compact and have a wider range of motion, with the bottle holding arm flipping back. Features: Strong wrists ...

Check whether the mechanical origin of the clamping machine is correct

Automatic/self-service parameter adjustment is possible

Check whether the empty opening is tripped

Confirm the nozzle center, R-angle, and nozzle aperture

Reconfirm the mold closing origin, readjust the mold, and confirm the clamping mechanical structure

Try detaching the screw set and cleaning the screw trio

Rated pressure of 1.47MPa (15kgf/cm²)

The recommended spacing of the device is 1500 in the X direction and 750 in the Y direction

The life of the spindle is calculated under normal use conditions, and the maximum rotation is about 10,000h under continuous operation, but the actual life will be shortened due to the use state

Both the standard spindle and the high-speed spindle are more than 7m³/min

The Business, Energy and Industrial Strategy Committee heard testimony from a number of United Kingdom manufacturing experts, United Kingdom including Tom Bouchier, managing director of FANUC UK, ...

Whether it's a top-of-the-line fuel tractor or your body, routine maintenance is required to keep any system of some complexity running at peak performance. The same applies to FANUC/FANUC Robotic arc welding cells. In order to achieve maximum uptime, ...

Fanuc United Kingdom has expanded its range of industrial robots with two new models: the M-20iD/25 handling robot and the ARC Mate 120iD welding version. Controlled by the R-30iB Plus controller, both robots have higher axial speeds and higher axial speeds compared to the previous ...

The last digit of the 12-bit alphanumeric combination of the Mate cabinet motherboard model 0 does not support vision, and the motherboards with 1 and 2 support vision

In order to ensure the safe and reliable operation of the machine tool, the CNC system should usually be routinely inspected and tested first, regardless of whether the fault involves the following inspections. This type of inspection includes a visual inspection and a mains voltage inspection. ...

The Fanuc Teach Pendant is an interface between the supervisor application tool software and the user (robot). The teach pendant is connected to the control cabinet by cable. We use ...

Fanuc robots have 2-axis, 3-axis, 4-axis, 5-axis and six-axis robots. On each control axis of the FANUC robot, there is an origin position and a movable range. Overtravel detection is performed at both ends of the movable range on each axis ...

The FANUC system is the system hardware, including scientific research, design, and manufacturing. The FANUC system was created by FANUC and developed in Japan. The role of the FANUC system is to include: 1. The spindle control loop is closed.

　　1. Teaching and manual robots 1) Please do not operate the teach pendant and operation panel with gloves to avoid the harm caused by accidentally touching the buttons. 2) When the robot is operated electrically, a lower rate speed should be used to enhance the ...