Introduction to the main parameters of Fanuc robot

Create Date: 2024-8-30 12:03:23|Source: FANUC/Fanuc

Fanuc robots have 2-axis, 3-axis, 4-axis, 5-axis and six-axis robots.

Introduction to the main parameters of Fanuc robot

On each control axis of the FANUC robot, there is an origin position and a movable range. Each axis is detected for overtravel at both ends of the movable range. For further safety, a range limit with mechanical brakes and a limit limit with a limit switch are also available. Also, do not modify the mechanical brakes. Failure to do so may cause the robot to fail to stop properly.

The installation method of Fanuc robot: ground installation, top crane installation, table installation, and tilt angle installation. Here are some of the installation methods for the models:

Ground mounting: R-2000iB/165F ; Ceiling Installation: R-2000iB/150U ; Mounting: R-2000iB/200R; Lean.

Bevel mounting: LR Mate 200iD

Repeatability refers to the accuracy of the robot repeatedly reaching one position at a time. Take the LR Mate 200iD as an example: The LR Mate 200iD has a repeatability of +0.02mm.

The maximum speed of movement refers to the maximum speed that can be achieved by each axis when the robot is moving. When moving short distances, it is possible that the maximum speed of each axis may not be reached.

Fanuc is a strong enterprise in the scientific research, design, manufacturing and sales of CNC systems, and is the world's largest famous manufacturer specializing in the production of CNC devices, robots and intelligent equipment. The CNC system (numerical control machine) produced by Fanuc can achieve nanometer precision and is used by most machine tools around the world, a large robot can handle production materials weighing up to one ton, while a small robot is only the size of a human arm. Relying on its advanced vision and force sensors for precise production operations, the robot is as flexible as a human hand. In Fanuc's factory, robots can work continuously for more than 700 hours per month, improving production efficiency and reducing production costs. Fanuc robots can be used in various fields such as food, medicine, electronic components, automobiles, etc., and Fanuc robots can be seen everywhere in the factories of many well-known enterprises around the world.

More on that

	Fanuc FAQ - How to enable the robot original path recovery function The following system variables are used to switch between valid and invalid original path restoration: $SCR.$ORG_PTH_RSM TRUE: The original path is restored FALSE: The original path is invalid
	Challenge Fanuc! The motor giant first bought Mitsubishi Heavy Industries machine tools, and then bought machine tool manufacturer OKK Following the completion of the acquisition of Mitsubishi Heavy Industries Machine Tools, Nidec Japan Densan, the world's largest electric motor manufacturer, will acquire machine tool manufacturer OKK. In February this year, according to Nikkei, motor maker Nidec will acquire Mitsubishi Heavy Industries' machine tool business, and Nidec will pay about 30 billion yen (about 1.8 billion yuan) ...
	FANU robots increase the economy of welding operations The use of industrial robots is now a trend because the use of stand-alone and responsive systems can increase productivity and reduce the cost per part of the product. Welding is carried out by an automated device connected to a stand-alone Ethercat computer-aided robot ...
	Automated Quality Control for Collaborative Robots: A Blessing for Small and Medium-sized Enterprises Creaform today announced the addition of a new VXscan-R software module to the VXelements 10 application software platform. This latest version is now compatible with a wider range of robot models, including cobots, bringing ease of operation and ease of use to a new ...
	Talent training first! Beijing Fanuc strongly promotes the high-quality development of the manufacturing industry Robot Lecture Hall on January 9, recently, Beijing Fanuc, as a leading brand in the field of CNC and factory automation in China, has been frequently reported in the context of new changes in the national strategic policies and industry development. It is reported that recently, Beijing Fanuc ...
	New Product Release\| The FANUC heavy-duty intelligent robot M-1000iA is here FANUC is proud to launch the new heavy-duty intelligent robot M-1000iA, which can handle 1000kg, and the robot can reach a radius of 3252mm. The M-1000iA features a new mechanical design that allows the robot to be more compact and have a wider range of motion, with the bottle holding arm flipping back. Features: Strong wrists ...
	Whether the robot control cabinet and the body can be used interchangeably The pre-installed software configuration of the device is inconsistent with the zero data of the device, so it is not recommended to replace it.
	Fanuc FAQ – The bot password feature is divided into several levels · Installation: You can assign a username, password, and password level. Usernames and passwords can be cleared. You can set the password log to be valid or invalid. You can set the number of password users in the system. OK Perform all operations on settings, programs, and operators. (The installation user can only set ...
	FANUC will meet you at the CMEF Medical Equipment Fair The 2022 China International Medical Equipment Fair (CMEF) will be held at the Shenzhen World Convention and Exhibition Center (Bao'an) from November 23 to 26. At that time, FANUC will bring five sets of automation and IoT intelligent solutions in the field of smart healthcare. 1 Medical Tibial Pad Display Unit ...
	FANUC FAQ - [ROBOSHOT] Replacement of backup batteries If the shutdown is more than 1 year, the backup battery of the CNC and servo motor needs to be replaced
	FANUC FAQ - The USB flash drive is not recognized when it is inserted on the TP, but the files can be backed up on the control cabinet Some TP cables in the R-30iA control cabinet do not support USB flash drives, and need to be replaced with TP cables that support USB flash drives (A660-2006-T840).
	Let's look at the CRX cobot in the food industry Cobots are ideal for automation by optimizing many processes in production, processing, and packaging in the food industry, increasing production flexibility and efficiency, and meeting stringent cleanroom and hygiene requirements. WIESHEU is a well-known bakery equipment manufacturer in Germany, in order to improve the baking ...
	FAQ - What is the input voltage of the [ROBODRILL] device Three-phase 170V-242V, three-phase 200+ 10%V is recommended
	FANUC provides efficient, intelligent and flexible solutions for the furniture industry According to the production task, the characteristics of the panel, and the production mode, the automatic production line of panel furniture conducts a comprehensive analysis and tailors a modern and intelligent production workshop with high efficiency, high quality and low cost in the panel furniture industry. The whole workshop production line includes automatic storage and delivery of raw materials in the front stage of production.
	FANUC FAQ - [ROBOSHOT] products show burn marks Lower the resin temperature, reduce the injection speed, and increase the mold vent
	What exactly is the difference between SMR mobile composite robots? What exactly is the difference between SMR mobile composite robots? Shanghai Fa Na has developed a mobile composite robot, which is used in loading and unloading and circulating transfer in complex scenarios The mobile composite robot has a multi-functional module of "hand + foot", which is not born to replace a single station, and its value ...
	ABB, Fanuc and other robot companies are new trends, where is the future of collaborative robots? As we all know, collaborative robots are an innovative category of industrial robots, which once came out of the circle with the advantages of safety and human-machine collaboration, and were quickly used in 3C electronics, semiconductors, automobiles, education and scientific research and other industries with the advantages of simple operation, strong flexibility and fast return on investment. At...
	Efficiency "Soaring"\|Let's see 3D vision + random pick-up in the field of agricultural product packaging! The Bin Picking solution consists of a robot equipped with machine vision technology and software that automatically recognizes and picks up objects within the box. Automated gripping solutions help address labor shortages, reduce physical demands and cumbersome ...
	Epidemic lockdown \| Shanghai Fanuc is "retrograde" and closed At present, Shanghai is in the critical stage of epidemic prevention and control, and when the city implements global static management, they are carrying their bags and going "retrograde" to the front line of production... According to the latest epidemic prevention requirements of Shanghai, Shanghai Fanuc actively responded and combined with the actual situation of the company.
	Beijing Fanuc has won three awards in a row and has become a dark horse for employer brand value enterprises Recently, Beijing Fanuc, a leading brand in the field of CNC and factory automation in China, has reported frequently: on December 10, at the "2021 Asia's Best Workplaces (Chinese Mainland)" jointly launched by AIA, Peking University School of Public Health and HRoot, China's leading human resources media ...