FANUC FAQ - [ROBODRILL] spindle life

Rated pressure of 1.47MPa (15kgf/cm²)

· Installation: You can assign a username, password, and password level. Usernames and passwords can be cleared. You can set the password log to be valid or invalid. You can set the number of password users in the system. OK Perform all operations on settings, programs, and operators. (The installation user can only set ...

Some TP cables in the R-30iA control cabinet do not support USB flash drives, and need to be replaced with TP cables that support USB flash drives (A660-2006-T840).

After unplugging the three cable plugs of the four axes, you can do it from the zero point for the next installation, and if it is a device before MiA, you need to buy a short connector for the amplifier

The injection molding machine is externally connected to the ventilation equipment setting

Try detaching the screw set and cleaning the screw trio

Slow down the injection rate, or clean the vent holes of the mold, or make it larger

The anti-collision function requires the use of EE interface, one end of the EE is connected to the *XHNBK signal, and the other end is connected to 24V; After that, enable the claw break function in System - Configuration

In recent years, new energy vehicles, lithium batteries and other industries have achieved rapid development. Subsequently, the manufacturing process and equipment of new energy vehicles have also undergone great changes. As one of the leading providers of intelligent manufacturing automation solutions, FANUC has a wide range of solutions in the field of new energy vehicles and their powertrains.

Robot Lecture Hall on January 9, recently, Beijing Fanuc, as a leading brand in the field of CNC and factory automation in China, has been frequently reported in the context of new changes in the national strategic policies and industry development. It is reported that recently, Beijing Fanuc ...

On January 14, FAW-Volkswagen 2020 Supplier Partner Conference was held in Changchun. As a core supplier of FAW-Volkswagen, Shanghai Fanuc Robot Co., Ltd. was awarded the FAW-Volkswagen Award for its outstanding performance in the technical transformation project of FAW-Volkswagen Plant 2.

You need to check the twelve-digit code at the beginning of the sign A05B and A06B of the spare parts; Parts with consistent 12-digit codes can be used with each other.

This may result in loss of molding data, damage to memory, and operation of the main circuit breaker must be performed after the screen is turned off

The length is less than 28mm, the maximum diameter is 50mm, the length is less than 120mm and more than 28mm, the maximum diameter is 80mm, the maximum diameter is more than 120mm and less than 250mm, and the maximum diameter is 40mm

With the further penetration of industrial digital intelligence, equipment intelligence has set off a new round of application in various industries. Especially in the power industry, collaborative robots are widely used in the power operation industry, which can assist in improving production power and work safety, and in line protection, installation and processing.

With high temperatures, food safety and hygiene have become particularly important. Robot-led unmanned chemical factories can not only improve production efficiency, but also ensure the safety and reliability of products to the greatest extent. Tasteful Sections, the largest potato grower in North America, has developed a significant number of potato growers in the packing process.

Measures such as enlarging the gate, setting up a cold well, or changing the location of the gate

As we all know, collaborative robots are an innovative category of industrial robots, which once came out of the circle with the advantages of safety and human-machine collaboration, and were quickly used in 3C electronics, semiconductors, automobiles, education and scientific research and other industries with the advantages of simple operation, strong flexibility and fast return on investment. At...

With the rapid development of the global logistics industry, there is an increasingly urgent need for enterprises to improve operational efficiency and reduce costs. As one of the world's leading manufacturers of industrial robots, FANUC Robotics has been more and more widely used in automation applications in the logistics industry. At...

The acclaimed FANUC wire cutting machine ROBOCUT has been reinforced, the α-C600iC! The α-C600iC inherits the three characteristics of high processability, high availability and high availability of the ROBOCUT series, and is suitable for the production of stamping molds, injection molds, and other large parts. ...