FANUC manipulator safety operation procedures

Create Date: 2024-8-30 12:03:23|Source: FANUC/Fanuc

1. Teaching and manual robots

FANUC manipulator safety operation procedures

1) Please do not operate the teach pendant and operation panel with gloves to avoid the harm caused by accidentally touching the buttons.

2) When the robot is operated electrically, a lower rate speed should be used to strengthen the control of the robot to avoid collisions.

3) Take into account the robot's movement trend before pressing the jog button on the teach pendant.

4) It is necessary to consider the movement trajectory of the robot in advance, and confirm that the line is not interfered with.

5) The operator should pay attention to the area where it is located and should be far away from the next action activity area of the robot.

2. Production run

1) Before starting and running, it is necessary to know all the tasks that the robot will perform according to the programmed program.

2) Know the location and status of all switches, sensors, and control signals that will affect the robot's movement.

3) It is necessary to know the location of the emergency stop buttons on the robot controller and peripheral control equipment, and be prepared to press these buttons in case of emergency.

4) It is strictly forbidden to step on the robot body and control facilities, and pay attention to the safety signs.

5) Never think that the robot is done without moving its program. Because at this time, the robot is most likely waiting

More on that

	"Powerful" and flexible\|M-1000iA is the right choice for heavy-duty robots! In the production scenarios of new energy, foundry, building materials and other industries, the automatic handling and palletizing of workpieces weighing hundreds of kilograms has always been a difficult point to be solved. In traditional production, multiple workers are often required to manually operate large-scale equipment, but there are problems such as difficult operation and inaccurate positioning.
	FANUC invites you to visit the China International Foundry & Metallurgical Exhibition The application of industrial robots in the foundry industry can not only ensure the quality of castings, but also alleviate the contradiction of labor shortage. At the upcoming China International Foundry Metallurgical Exhibition, ...
	Solutions to the most common FANUC machine alarm problems I often encounter Fanuc machine tool alarms that plague me, so let's analyze what kinds of Fanuc alarms are there and how to solve them? Fanuc Machine Alarm: SV0301, APC Alarm - Communication Error 1. Check the feedback line to see if there is any poor contact. Replace the feedback line; 2. Inspection ...
	The real "industrial" cobots are assembled! Come and watch What are the technical highlights of CRX's full range of "industrial" cobots? What revolutionary improvements can it bring to the industry? December 15th, 14:00-15:00 Shanghai Fanuc "CRX - Real 'Industrial' Collaborative Robot" new product launch conference is about to strike In industrial scenarios, ...
	FANUC FAQ - [ROBOSHOT] When inert gases such as nitrogen are used in molding operations Check whether the oxygen concentration is abnormal at any time
	War Epidemic Diary: Shanghai Fanuc Logistics Team in Action Under the background of the current round of epidemic in the country, logistics traffic is not smooth. In order to ensure the smooth delivery of customer orders, Shanghai Fanuc logistics team actively coordinates resources and uses a variety of methods to ensure the normal production of customers. In April, an automotive industry passenger in Chongqing ...
	New models and new technologies, the machine tool exhibition is right to come to FANUC! On-site demonstration: Efficient machining of automotive components New tapping spindle The new generation of wire-cutting machines α-CiC The new model of the highly acclaimed FANUC wire cutting machine ROBOCUT, α-CiC, will be exhibited in China for the first time! α-CiC offers high processability, high availability, high availability ...
	FAQ - [ROBODRILL] The device has no alarm but does not work Check whether there is a drop in air pressure in yellow during the alarm/diagnosis, and if so, it is recommended to check that the device is connected to the air supply
	FAQ - [ROBODRILL] sound pressure level The equivalent continuous A-weighted average sound pressure level in the machine tool workplace is less than 70dB
	Fanuc's common problem - [ROBOCUT] processing speed is slow Clean the upper and lower heads and check whether the connecting cables of the heads are damaged
	Fanuc Robotics empowers the transformation of the manufacturing industry Since 1977, when FANUC began mass production of ROBOT-MODEL 1, Fanuc has continuously applied its first-class CNC, servo and factory automation technologies to the development and production of robots for 45 years. At present, the cumulative number of Fanuc robots delivered worldwide has reached 880,000 units ...
	FANUC FAQ - [ROBODRILL] spacing between devices The recommended spacing of the device is 1500 in the X direction and 750 in the Y direction
	CHINAPLAS rubber and plastic exhibition, FANUC highlights are the first to see! FANUC will bring a number of automation solutions for plastics processing, including highly integrated injection molding machines and robotics systems, CRX collaborative robots, and leading IoT and digital factory technologies Pre-tank filling precision injection molding In view of the high dimensional accuracy requirements of the product, FANUC's latest ...
	Epidemic lockdown \| Shanghai Fanuc is "retrograde" and closed At present, Shanghai is in the critical stage of epidemic prevention and control, and when the city implements global static management, they are carrying their bags and going "retrograde" to the front line of production... According to the latest epidemic prevention requirements of Shanghai, Shanghai Fanuc actively responded and combined with the actual situation of the company.
	Fanuc's 880,000th robot in the world was delivered to Sany Group On August 18, 2022, the delivery ceremony of the 880,000th global robot of Fanuc was held at the headquarters of Sany Group. Dai Qinghua, Director of Sany Group and Chairman of Sany Photovoltaic Technology Co., Ltd., Guo Chengzhi, Deputy General Manager of Sany Group and General Manager of Sany Robot Co., Ltd., Shanghai Fanuc Robot Co., Ltd.
	Fanuc FAQ – How to modify the range of motion of the robot It can be modified in the system-axis action range, but for M-10iA and 20iA robots, attention should be paid to the installation of the external pipeline of the J6 axis, and it should be modified in the control start mode.
	FANUC FAQ - [ROBOSHOT] products appear burr Reconfirm the mold closing origin, readjust the mold, and confirm the clamping mechanical structure
	FANUC FAQ - The USB flash drive is not recognized when it is inserted on the TP, but the files can be backed up on the control cabinet Some TP cables in the R-30iA control cabinet do not support USB flash drives, and need to be replaced with TP cables that support USB flash drives (A660-2006-T840).
	600 pieces/hour, laundry does not ask for people \| FANUC robots help the industrial laundry industry In the context of globalization, the textile and apparel industry is facing quarterly labor shortages and insufficient equipment numbers. At the same time, there are unfavorable factors such as noise, temperature and humidity, and air cleanliness in the textile workshop that affect the work of operators. The two pain points are superimposed, and the textile industry is promoted to achieve self-improvement.
	FANU robots increase the economy of welding operations The use of industrial robots is now a trend because the use of stand-alone and responsive systems can increase productivity and reduce the cost per part of the product. Welding is carried out by an automated device connected to a stand-alone Ethercat computer-aided robot ...