Screen structure: ITO Film is attached to ITO Glass, and is isolated by DOT points in the middle
Outlet cable: integrated with the panel
Connector: 2.54mm pitch socket, standard AMP87499-9
Touch media: fingers, gloved hands, pens, credit cards, etc
Screen thickness: 1mm-5mm
Screen size: 2 inches-21 inches
Resolution: 4096x4096
Response time: Less than 8 ms (finger input)
Touch strength: 15-40gr with a hardness of 600 and a diameter of 16mm silicone
Conversion speed: less than 20ms
Position accuracy: standard deviation less than 2 mm
Touch density: Touch resolution 4096x4096 touch points
Screen error: less than 1.5%
Supply voltage: DC+5V
Screen resistance: 200Ω-50Ω (between X1-X2); 200Ω——500Ω（between Y1-Y2)
Insulation resistance: greater than 20MΩ at DC25V
ESD protection: can withstand 20 emissions of 15 kV voltage randomly distributed on the surface of the screen (per IEC 801-2; 150pF and 150Ω）
Transmittance: 75-85% (at 550 nm)
Operating temperature: -20°C-70°C
Storage temperature: -25°C-80°C
Vandalism: 3-12mm special process fully tempered optical glass as the base material. Use 1 pound at a height of 130 cm to make it fall freely to the center of the glass without the glass breaking.
Sealing characteristics: The highly sealed material tightly seals the filter device, frame and anti-vandal glass to prevent liquid leakage;
Operating temperature: -20C-70C
Storage temperature: -40C-85C
Operating humidity: 90%RH at 40°C (no condensation)
Storage humidity: 90%RH at 40°C (no condensation)
Sealing: NEMA4 and IP65 compliant
High temperature storage: 80°C test for 240 hours
Cryogenic storage: -25°C test for 240 hours
Durability: 3H on the Mohs scale (according to ATSM D3363)
Service life: >1,000,000 touches (Polyester stylus) >5,000,000 touches (Rubber stylus)
Safety Certification: FCC. CE、TUV、UL
|
More on that
|
Common Problems and Solutions of Embedded Version of Kunlun Tongtai MCGS Touch Screen(31-40)
31. Historical alarms are not displayed
(1) "Automatically save the generated alarm information" is not selected in the attribute setting of the alarm data object;
(2) The alarm data does not reach the upper/lower limit of the alarm value;
(3) "MCGS_ALARM" is not selected for the group object.
32. ...
|
|
How to set the login password through 'user rights management' on Kunlun Tongtai touch screen
1. Set up groups and users
The presentation software is:
The menu bar > tools > user rights management
Click 'Add User Group' to add a group, here I create two groups "Administrator", "Engineer" group is completed, and then add a user, create a password to complete! (Belong to the user group to ...
|
|
Common fault phenomena in the operation of Kunlun Tongtai touch screen
TPC1561HI common fault phenomenon of Kunlun Tongtai touch screen operation panel
(1) Black screen, blurred screen, white screen
(2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging
(3) The LCD screen has no display, and the brightness is not clear
(4) LCD screen display vertical bar, display ...
|
|
MCGS Kunlun Tongtai touch screen operation authority setting
1. Open Kunlun Tongtai touch screen programming software, find [Tools] in the menu bar and click to open.
2. In the [Tools] drop-down menu, select [User Management Permissions] and click Open.
3. In the pop-up User Manager window, select [New User] and click Open ...
|
|
Kunlun Tongtai touch screen - the advantages and disadvantages of resistive screen
merit
The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...
|
|
Kunlun Tongtai touch screen - daily maintenance of large-size infrared touch screen
1. Do not hit with metal objects.
Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken.
2. Avoid squeezing the screen with heavy objects.
Around HMI ...
|
|
Steps to upload the program on the Kunlun touch screen
1. Install the MCGS configuration software on the computer first, then find the power supply to supply power to the touch screen, connect the screen with the computer with the communication cable, and upload it in the software.
2. After we install the software, first go to open the software, and then in the drop-down option of the file menu, select ...
|
|
Kunlun Tongtai touch screen - how to realize the operation of the touch screen to achieve PLC program control
1. The touch screen is actually called man-machine interface, a man-machine control method that can communicate with the control equipment. Think of it as a collection of button indicator meters.
2. If you want to understand the working principle of the touch screen, you must know how to communicate, we know that a button to control a contactor ...
|
|
How to copy the touch screen program
Step 1. Backup program: First of all, you need to back up the touch screen program that has broken the original display control. Program files can be copied to a USB or SD card.
Step 2. Install a new display touchscreen: Install the new display touchscreen to your computer, then connect the power and data cables.
...
|
|
Kunlun Tongtai touch screen - touch all-in-one screen fault analysis and treatment method
Analysis and treatment method of touch all-in-one screen fault
Fault 1: Touch deviation phenomenon: The position touched by the finger does not coincide with the mouse arrow.
Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position.
Place...
|
|
How to set the fault alarm between Kunlun Tongtai touch screen and Siemens PLC
1. Write a program in the PLC, and when a fault occurs, an alarm signal will be output. The corresponding program can be written with a series of PLCs such as S7-200 or S7-1200.
2. Configure the communication protocol between the PLC and the touch screen. Protocols such as MODBUS or OPC can be used to communicate, specifically ...
|
|
The common problem handling process of Kunlun Tongtai touch screen
44. Clear the configuration engineering password flow
(1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel;
Attestation File Format:
Our company is XXX, ...
|
|
Kunlun Tongtai TPC1062K the fault repair that occurs when the touch screen is touched
1. The touch screen is not allowed to be repaired
If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If you touch some areas accurately ...
|
|
Kunlun Tongtai touch screen arrived in large quantities
Kunlun Tongtai touch screen arrives in large quantities, can be easily matched with Siemens PLC, details can be consulted
There is a stock model
TPC1061TI
TPC1071GI
TPC1561HII
TPC1570GI
TPC7062TI
TPC7072GI
...
|
|
How to set the Kunlun Tongtai touch screen and PLC communication is normal
1. First of all, open the Kunlun Tongtai touch screen software, find the [User Window] and click to open.
2. Then select [New Window] to create two windows.
3. Then in the page that opens, click [Window 0] to enter the window.
4. Then in the toolbox ...
|
|
Types of Kunlun Tongtai touch screens
Kunlun touch screen is a positioning device, the user can directly enter coordinate information by pointing to the computer, just like a mouse and keyboard, it is also an input device. Kunlun touch screen has many advantages such as durability, fast response, space saving, and convenient communication. With this technique, ...
|
|
Kunlun Tongtai touch screen - operation methods and skills of touch screen
1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.
|
|
Common problems and solutions of embedded version of Kunlun Tongtai MCGS touch screen (20-30)
20. The TPC project running environment is automatically restarted
If the CPU usage reaches 99% during the project runtime, the runtime environment will automatically exit and then restart.
There may be many reasons for high CPU usage: too many bitmaps, too many scripts in the loop policy, and short cycle times.
...
|
|
Kunlun Tongtai touch screen - the technical characteristics of infrared touch screen
1. High degree of stability, will not drift due to changes in time and environment
2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof)
3. High light transmittance, no intermediate medium, up to 100%
4. ...
|
|
Kunlun Tongtai touch screen - precautions for the operation of touch screen
1. The film surface of the touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product
2. The touch screen part is a glass product, the corners of the glass are sharp, please wear gloves/finger sleeves when assembling
3. The touch screen part is a fragile glass product, and it should not be touched during assembly.
|
|
Contact
working hours
