The working principle of pneumatic ball valve - Wuzhong instrument

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. Double blocking and discharge function of turbine fixed ball valve: the turbine ball valve is fixed by using tension spring preload floating valve seat, when the valve is in two different states, fully open and fully closed, the fluid is ...

The shut-off valve is a kind of actuator in the automation system, which is composed of a multi-tension spring pneumatic membrane actuator or a floating piston actuator and a regulating valve, which receives the signal of the regulating instrument and controls the blocking, switching or switching of the fluid in the process pipeline. It has a simple structure, sensitive response, and ...

Double-seat cast ball angle valve The nominal diameter is 40-200 mm Nominal pressure ANSI 125, 150, 300, 600JIS10, 16, 20, 30, 40K PN1.6, 4.0, 6.4MPa Connection type Flange...

1. According to the processing requirements, some parts need to be polished, and there can be no processing burrs on the appearance; 2. All parts are degreased; 3. After the degreasing is completed, pickling and passivation will be carried out, and the cleaning agent does not contain phosphorus; 4. Rinse with pure water after pickling and passivation.

Stainless steel globe valve is a kind of globe valve, the specific stainless steel raw materials are CF8, CF3, CF8M, CF3M, different raw materials are selected, can be separated from water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media. Stainless steel globe valves are divided into manual stainless steel shut-offs.

Valve is a kind of commonly used hardware products, the valve also has certain skill requirements before assembling and in the process of installation, otherwise the assembled valve is unlikely to show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...

1. Corrosion of valves is usually understood as the damage to the metal materials of valves under chemical or electrochemical environmental effects. Because the corrosion phenomenon occurs in the spontaneous interaction between the metal and the surrounding environment, therefore, how to block the metal from the surrounding environment or more use of non-...

The actuator of the control valve has pneumatic type, electric type and electro-hydraulic linkage type, and the pneumatic equipment is divided into barrier type and cylinder type. Depending on the action when the operating signal and the drive source disappear, the actuator has a forward type, a reverse type, a non-directional type, and a persistent type. The positive type is used in the operation signal and drive ...

Two-position five-way solenoid valve is a pneumatic component commonly used in gas-electric automatic control system, its main use is to control the double-acting cylinder to complete the automatic switching of the air circuit, widely used in the pneumatic equipment of various industrial parts, to complete the automatic control and long-distance operation in the production process, it has the ability to ...

The control valve, also known as the control valve, is a device in the field of industrial automation process control that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the pipeline medium.

(1) The conditioning valve does not operate. The symptoms and causes are as follows: 1. No signal, no air source. (1) The air source is not opened, (2) because the water contained in the air source freezes in winter, resulting in the blockage of the air duct or the blockage of the filter and pressure reducing valve, (3) the compressor is faulty; (4) Leakage of air source main pipe. 2． ...

1. Why does the double-seat valve vibrate briefly during small opening operation For a single core, when the medium is a flow-open type, the valve has good stability; When the medium is a flow-closed type, the stability of the valve is poor. The double-seat valve has two spools, the lower spool is in the flow closed and the upper spool is in the flow open, so that in the small opening ...

(1) The conditioning valve belongs to the on-site dashboard, and the regular working temperature should be in the range of -25-60 °C, and the air humidity should be ≤ 95%. If it is installed outdoors or in a high-temperature place, moisture-proof and temperature-reducing measures should be used. In areas where there is an epicenter, it is necessary to eradicate the source of vibration or improve vibration isolation measures. ...

1. Units and scales (scales) The scale (scale) unit of the temperature gauge is the Celsius temperature (°C). 2. Detect (measure) the penetration length of the element The length of the penetration should be selected in such a way as to insert the detection (test) element ...

Solenoid valve is an industrial equipment controlled by solenoids, and is a basic element of automation used to control fluids, which belongs to actuators and is not limited to hydraulics and pneumatics. It is used in industrial control systems to adjust the direction, flow rate, speed and other parameters of the medium. Solenoid valves can be used with different circuits to ...

The filter is an indispensable product in the fluid pipeline, which is generally installed at the inlet end of the pressure relief valve, pressure reducing valve and water level valve set equipment, which has the effect of eliminating impurities in the medium and avoiding the phenomenon of other equipment being stuck. After the medium passes through the filter cartridge equipped with a certain standard screen, the impurities are blocked.

When the gate valve is closed, the sealing surface can only rely on the medium pressure to seal, that is, only rely on the medium pressure to press the sealing surface of the ram to the valve seat on the other side to ensure the sealing of the sealing surface, which is self-sealing. Most gate valves are forcibly sealed, that is, when the valve is closed, it is necessary to rely on external force to forcibly ...

1. In the case of interlocking action of pneumatic valve equipment, the valve orientation should have the following situations: The EC air supply is discarded and the valve is in a closed position FO__ air source is discarded, and the valve is in the opening position FL-_ The air source is lost, and the valve is in the time position and has been insisting FL ...

Knife gate valve is a kind of valve, which is called knife gate valve because of its different structure. It has outstanding circularity through the use of some special media, such as some viscous media, granular media, etc. It solves some of the problems of modern equipment and becomes an indispensable component of modern equipment ...

1. Glander type This is the form that is used a lot. The same form can be different in many details. For example, in terms of hold-down bolts, it can be divided into T-bolts (for low-pressure valves with a pressure of ≤ 16 kg/cm²), stud bolts and loose joints. From the gland point of view, it can be divided into integral and ...