The new STEP motion controller SC20-A3L has a RAM capacity of 1M

Introduction: Xinshida/STEP high-voltage solid-state soft starter AHS80, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, so as to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set ...

Introduction: AS170 series motor integrated inverter is a high protection level motor drive all-in-one machine developed by Shanghai Singrina Xinshida Motor Co., Ltd., which adopts a unique appearance design and installation method, with local and remote control mode, which is more convenient and reliable to install and use.

Introduction: Xinshida/STEP HVAC inverter AS550 is a 400V class 380V-460V current vector control compact high-performance inverter, suitable for three-phase AC asynchronous motors, permanent magnet synchronous motors and servo motors with a motor capacity of 5.5-22kW. Features: Parameter...

Introduction: Xinshida/STEP bus open operation control platform is an open operation control platform launched by Xinshida AMC1600E Support IEC6113-3 programming, support 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD can be flexibly configured according to the actual situation of customers. ...

Introduction: Xinshida/STEP escalator special inverter AS310, smooth tracking start, can be smooth start of the rotating motor at any time with low impact Features: High-performance software features The asynchronous motor MTPA technology is adopted to reduce the motor loss and improve the system ...

Introduction: Xinshida/STEP motion controller SC30-A6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: The AS720 series of STEP inverter is an airborne all-in-one product developed for the HVAC industry based on the mature hardware platform of Xinshida. The inverter is cooled by air conditioning refrigerant, with high power density, and the design process takes into account the working environment of HVAC, installation ...

Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...

Introduction: ME700 series engineering drive is a common DC multi-drive inverter specially designed and developed for heavy-duty machinery and equipment in the rubber industry. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international reliable inverter.

Introduction: Xinshida/STEP motor 80S2S, 2500 line incremental/wire-saving encoder, optional absolute encoder; Product parameters Power range: 750W Input voltage: AC - 220V Rated torque: 2.4N.m Encoder Type: 25 ...

Introduction: Xinshida/STEP pump controller D150 Features: High protection level 1P54, 3C4 standard circuit board coating, suitable for high humidity and high dust environment Comprehensive and reliable protection function, detection of motor overcurrent, water shortage of water pump, rust prevention, float abnormality, etc ...

Introduction: AS560 inverter is a customized product for on-board air conditioning applications, which can be matched with AC inverter compressor and DC inverter compressor. The design of the inverter is based on an in-depth understanding of the characteristics of the industry, and the design reduces some non-essential functions in the industry, improves the compactness of the product and reduces the ...

Introduction: Xinshida/STEP servo motor 60B series Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.55A——2.6A Rated speed: 300 ...

Introduction: Xinshida/STEP elevator special inverter STEPAS320, using 32-bit motor special digital signal processor DSP, programmable ultra-large-scale logic CPLD and intelligent power module IPM, innovative load-free sensor start compensation technology, so that the elevator does not need to install weighing devices ...

Introduction: Xinshida/STEP motion controller SC30-B6H, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Xinshida/STEP motion controller SC30-A6H, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Xinshida/STEP fire inspection inverter AS180F Features: There is no need to set any parameters, and it can be used directly after wiring A new special algorithm is used to fundamentally solve the problem of overcurrent protection for large motor starting The motor matching ability of the ultra-wide power range is realized.

Introduction: ME800 series high-voltage inverter has power electronics technology and vector control technology in one of the high-high voltage source high-voltage inverter, it greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, and realizes the voltage superposition through the cascade of multi-stage H-bridge power units.

Introduction: Xinshida AS610 inverter high reliability design is a small power inverter, is specially developed for small power lifting ends, its advantages are small size, high performance, can be used for asynchronous motor and synchronous motor drive, high protection level. ...

Introduction: Xinshida/STEP Motion Controller AMC1610C-016, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...