STEP Inverter AS720 Series 380-460VAC

Introduction: Xinshida AS560 two-in-one product is the integration and development of AS560 inverter and DCDC two platforms. High integration, compact size, easy for customers to use. Product parameters Inverter rated power: 11—— ...

Introduction: AS-M20 series inverter adopts advanced non-speed sensor vector technology, advanced motor parameter identification, online estimation technology and advanced flux estimation technology, both in the speed regulation range and in the dynamic response, control accuracy and low-frequency torque have been greatly improved.

Introduction: Xinshida AS450 is a universal vector inverter. The product not only has typical V/F control technology, but also adopts no speed sensor vector control technology, closed-loop vector control and torque control technology, and combines the domestic application characteristics to further strengthen the reliability of the product.

Introduction: Xinshida/STEP servo motor 130SH Product parameters Rated power: 1.0kW——3kW Number of pole pairs: 5 Rated torque: 4.77N.m——14.3N.m Maximum torque: 14.3N.m——42.9N.m Rated speed: 200 ...

Introduction: Xinshida/STEP AS170NT inverter is rated for operation at 45°C high temperature, which is suitable for the high temperature environment of the thermal power station; 1.5-75kW full range of piggyback installation, saving installation space; IP54 high protection, PCB to meet the 3C4 environment coating; Multiple controller options: temperature/differential temperature control ...

Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...

Introduction: Xinshida AS900 series 3-in-1 new energy vehicle auxiliary motor controller, for PHEV and EV; High power density; High overload capacity; Built-in voltage, current, temperature detection; Integrated drive protection. Product References ...

Introduction: AS M21 series inverter is a universal inverter designed for China's small power segment motor speed control market, with typical VF control technology, but also using no speed sensor vector control technology, the product integrates Germany technology, Chinese manufacturing technology, light and heavy load in one, ...

Introduction:Xinshida/STEP inverter AS510 series adopts advanced controllable rectification technology, with LCL filter to achieve active rectification, providing constant DC power supply and energy feedback for the system, and can run 1 or more inverter units on the DC bus to form a four-quadrant operation of multi-...

Introduction: Xinshida/STEP fire inspection inverter AS180F Features: There is no need to set any parameters, and it can be used directly after wiring A new special algorithm is used to fundamentally solve the problem of overcurrent protection for large motor starting The motor matching ability of the ultra-wide power range is realized.

Introduction: The new Shida/STEP bus IO module ET1616A Product parameters Input channels: 16 channels Input voltage: 24VDC Signal input type: optocoupler input Input logic: Selectable Active-High Input current: 7mA——15mA ...

Introduction: AS600 series hoisting inverter adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the application characteristics of the hoisting machinery industry to further strengthen the reliability and environmental protection of the product.

Introduction: Xinshida/STEP inverter AS800 greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, realizes voltage superposition through the cascade of multi-stage H-bridge power units, has excellent high-voltage sine wave output, and can directly drive high-voltage motors, without installing any...

Introduction: Xinshida/STEP soft starter AHS series, the working principle of the soft start device is to control the output voltage by controlling the trigger angle of the thyristor, to meet the different current and voltage requirements in the process of motor starting. During the motor start-up process, according to the pre-set starting ...

Introduction: ME500 series high-performance vector inverter not only has typical V/F control technology, open-loop vector control technology, closed-loop vector control and torque control technology, but also adopts synchronous open-loop vector control technology, synchronous closed-loop vector control technology, and combines the domestic application characteristics, ...

Introduction: Xinshida/STEP bus motion control card ADT-6320E, bus control card, support 16-axis bus control, 16 bus IO module expansion, servo support QXE, EM, Panasonic, Sanyo with EtherCAT protocol communication servo, with motion trajectory pre-processing planning function, support two groups ...

Introduction: Xinshida/STEP servo motor 60B series Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.55A——2.6A Rated speed: 300 ...

Introduction: Xinshida/STEP universal servo drive K1AS Features: Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses ...

Introduction: Xinshida/STEP Industrial Fan STEP-F Series New energy-saving and environmentally friendly large-scale industrial fan and other energy-saving and environmentally friendly products. Features: Ambient cooling Feel the temperature drop by 8-10°C The natural wind STEP-F series ceiling fan adopts ultra-large diameter fan blades, which can be operated at low speed.

Introduction: Xinshida/STEP inverter AS620 series is a special inverter specially designed for the elevator market, suitable for elevator drive occasions. The product adopts excellent motor control technology, which not only has excellent control performance, but also combines the application characteristics of Chinese elevators.