1. Plug in the U disk on the touch screen, you don't need to power off the screen, the screen supports the hot-swap function, but at this time, it is best not to communicate with external devices to reduce unnecessary impact. After the screen detects an external device, a dialog box will pop up, select the second Upload Project option, enter the upload password in the pop-up dialog box (the default is 6 1s), check Upload Project Files, and click OK;
2. In the next pop-up dialog box, select the + sign in front of the second option, click to expand, select the following options, such as: device-0, and click OK;
3. Wait for a while, there will be a process of uploading the program on the screen, and after the original screen is restored, you can dial the U disk off the touch screen;
4. After plugging the U disk into the computer, find the new folder, click on the 001 folder, which has an mt8000 file, right-click to rename, add the .xob suffix, there is a decompilation option under the tool options of the software, and then open the decompiled mtp file in the software.
|
More on that
|
Weiluntong touch screen - common faults and solutions of infrared all-in-one machine
Why can't the infrared touch all-in-one machine be calibrated?
1. It is possible that the touch screen control card receives the operation signal before the host starts to load the touch screen driver, please power off and restart the computer and recalibrate.
2. It is possible that the sound wave screen is used for a period of time, ...
|
|
Weilun touch screen use and maintenance
Due to technical limitations and poor environmental adaptability, especially the surface acoustic wave screen, the screen will not be able to be used normally due to water droplets, dust and other pollution, so the Weilun touch screen also needs regular maintenance like ordinary machines. And because the Weilun touch screen is a variety of electrical equipment...
|
|
Common faults in the maintenance of the man-machine interface and the maintenance of the dark screen
1. Dispose of dirt and grease on the touch screen
The accuracy of the screen is a characteristic of grease build-up on the surface, which can make it cumbersome to type the correct commands. In addition, due to the accumulation of dust caused by overheating, the internal components of industrial computers may not work properly. The use of microfiber ...
|
|
Key points for the selection of Weiluntong touch screen
1. Consider the size, how big the screen is, 7 inches or 10 inches, etc
2. Whether there is an Ethernet communication interface or a USB interface
3. Consider the type of interface supported by the touch screen, RS232/RS485 interface
4. Whether there is a general agreement, so that it can cooperate with different brands...
|
|
How to change the description of the touch screen measurement point of Weiluntong
1. First of all, open the created Weilun touch screen project, select Common in the menu bar and click Open.
2. Secondly, select the system parameter icon in the common drop-down menu and click to open.
3. Finally, click Change.
...
|
|
Weiluntong touch screen - what should I do if the industrial touch screen clicks and does not respond?
The industrial touch screen is a resistive screen, which is better than the capacitive screen anti-interference, but generally if there is no response, most of the touch glass on the outside (generally called the touch board) is broken, and it is good to replace it directly, of course, the following problems are not excluded:
1. The touch screen and PLC are generally used together, and the ...
|
|
Weiluntong touch screen - the characteristics of surface acoustic touch screen
(1) The surface acoustic touch screen is a high-durability structure, which is scratch-resistant and anti-violence. Because the working surface of the surface acoustic touch screen is a layer of invisible and indestructible acoustic energy, the base glass of the touch screen does not have any interlayer and structural stress (the surface acoustic wave touch screen can be developed to a straight ...
|
|
How to insert the bit status indicator into the Weilun touch screen
Open the created Weilun touch screen project, select [Common] in the menu bar and click Open.
In the Common drop-down menu, select the Bit Status Indicator icon and click Open.
In the pop-up [New Bit Status Indicator] setting window [General Properties] ...
|
|
Frequently encountered problems with the use of Veruntong touch screen - Other
5.1 Why does the prompt "EasyWindow must run from EasyManager or EasyBuider" appear when using the offline simulation function?
If the serial port is selected as com4 or above (excluding com4), the prompt will be displayed, but it will not affect the download function, ...
|
|
How to set the IP address of the touch screen on the touch screen
When using the Weiluntong touch screen, how to set the IP address
Examples: CMT2109X2 and CMT2079X
First of all -> click on the little yellow button on the touch screen
Secondly -> Click on the lock symbol
Again-> Enter the password by default 111111
And then-〉 ...
|
|
Weiluntong touch screen - the reason for the black screen of the industrial touch screen
1. Check whether the power supply of the host is working normally. First, check whether the host system is powered by checking whether the power indicator on the host chassis panel is on and whether the power supply fan is rotating. Secondly, use a multimeter to check whether the external voltage meets the requirements, the voltage is too high or too ...
|
|
What is the function of the DIP switch on the back of the touch screen?
There are 2-4 hidden DIP switches on the back of the VIRONT touch screen, and each HMI backplate has a set of reset buttons and DIP switches that can be used to trigger the corresponding function when switching between different modes. The following is a list of categories:
mTV series
cMT-SVR series
If cMT-SVR ...
|
|
What is the reason why the touch screen cannot be turned on after restoring the factory settings?
1. Check that the power cord is plugged in and if there is electricity. If there is no electricity, you can replace the cord or plug.
2. Check if the power switch is on. If it doesn't turn on, you can try turning on the power switch.
3. Check if the battery is charged. If the battery is low ...
|
|
The steps of Weiluntong touch screen CMT to MT copy screen
1. Press the "Menu" button to enter the menu interface.
2. Select the "Picture" option to enter the screen settings interface.
3. In the screen settings interface, find the "Copy" option and press the "Enter" key to enter.
4. In the "Copy" option, select "Copy...
|
|
The method of touch calibration on the touch screen of Weiluntong
1. DIP switch mode touch calibration and system initialization.
For the full eMT series, MT8000i series, TK series, WT series and other HMIs, there is a set of reset buttons and DIP switches, which can trigger the corresponding functions when switching between different modes.
If the HMI touches ...
|
|
What are the main applications of touch screen?
Store Payments
The checkout counter of the store now uses a computer interactive terminal device. By operating the touch screen, the customer may print out a payment slip with the name and price of the goods. On the terminal, you can use the full-screen video image to promote the product, and the customer can ...
|
|
Weiluntong touch screen - daily maintenance of touch screen
When using touch screens, due to technical limitations and poor environmental adaptability, especially surface acoustic wave screens. The screen cannot be used normally due to water droplets, dust, etc., so touching the screen requires regular maintenance just like ordinary machines. And since the touch screen is much ...
|
|
Velun Tong Touch Screen EBPro Software Knowledge Points(25-29)
25. Bit status switch switch, bit status indicator, equipment linkage:
Through the bit state switching switch element OFF->ON, the macro command is executed: the bit status indicator is set to the ON state;
Select the execution macro through the PLC control, select the trigger mode ON->OFF, and set the bit ...
|
|
A common problem encountered in the use of Weiluntong touch screen - display
3.1 What should I do if the touch screen shows garbled characters?
Select "Oriental Language" in the EB500 software "Options/Language Selection", and then compile it after saving it so that there will be no garbled characters.
3.2 Why can't the following window appear when editing EB500 software, and it is blank?
...
|
|
Veriton touch screen - precautions for using industrial tablet PCs
1. When turning on and off the power of the machine, it should be operated in strict accordance with the regulations;
2. According to the severity of the environment, set a time limit to open the machine head to clean the reflective stripes and inner surface of the touch screen;
3. At present, the mainstream industrial display program does not have a mouse cursor, because the flashing of the cursor will ...
|
|
Contact
working hours
