The difference between LW and RW of Weiluntong touch screen

1. The film surface of the industrial touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product. 2. The industrial touch screen part is a glass product, and the corners of the glass are sharp, please wear gloves and finger sleeves when assembling. 3. The industrial touch screen part is fragile glass ...

1. Check if the touch screen is clean: If there are stains or grease on the surface of the touch screen, it will cause the touch to be insensitive or slow to respond. The touchscreen surface can be cleaned using a specialized touchscreen cleaner or a clean cloth. 2. Check if the touch screen is damaged: If the touch screen surface is damaged, ...

Check whether the connection interface is loose, and then check whether Serial Port and Interrupt Number conflict. If there is a conflict, adjust the resources to avoid the conflict. Then check the surface of the touch screen for cracks. If there is a crack, replace it in time. It is also necessary to check the touch screen table ...

First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the touch screen, and replace them in time if there are cracks. It is also necessary to check the surface of the touch screen for dirt and dirt.

1. Generally, in the lower right corner of the touch screen, there is a small black arrow button, click and enter the correct password, you can enter the system settings. However, when configuring, you can disable this button in the software system settings. 2. Set the system bit LB-9020 in the touch screen to ON...

1、cMT3090 9.7" TFT display 1024*768 dots, brightness 350, contrast ratio 500:1, 262K color, Flash memory: 4GB memory, 1GB, DC19.2-28.8VDC power supply, four-wire resistive type, SD card slot, support SD/SDHC, USB Host USB ...

(1) The indicator light of the boot host is normal, but the monitor shows no signal input (black screen); (2) Press the on/off button, but the host has no response (the indicator light is not on, and the host cannot be heard to start); (3) The computer is restarted repeatedly, accompanied by crashes and blurred screens; (4) The screen is broken ...

4. Use Fault 4.1 What should I do if the newly purchased touch screen downloads the programmed program and it cannot be touched or the touch freezes? First of all, hit the No. 2 DIP switch on the back of the screen to the direction of on, and then power on to see the copyright of the last line of the screen.

1. First of all, open the created Weilun touch screen project, select Common in the menu bar and click Open. 2. Secondly, select the system parameter icon in the common drop-down menu and click to open. 3. Finally, click Change. ...

The five-wire resistive touch screen and the four-wire resistive touch screen both adopt the principle of analog resistance, and their conventional fault characteristics are exactly the same as those of the four-wire resistor. If you are using a five-wire resistive touch screen, when there is an installation and maintenance problem, please determine and solve the problem in the following order. ...

Sometimes we need to monitor and change the program of PLC equipment, and when it is inconvenient to connect to PLC or there is no communication line, we can choose to achieve it through the penetration function of the touch screen. The traversal communication function consists of the following two modes: Ethernet When using [Ethernet] ...

Precautions when using Verun Tong inverter 　　When shipping and storage During the storage period, it is necessary to ensure that the inverter is not subjected to physical shocks and oscillations. It is also necessary to ensure that they are not exposed to rain and are not placed in places where the ambient temperature is too high. When transferring, hold the bottom of the body ...

1.3D Object Exhibition (dynamic display of 3D models of objects) [1] 2. Banks and other financial institutions (business inquiries and service promotion at business locations) 3. Telecommunications (business inquiry in the business hall, business promotion in the experience hall) 4. Government agencies (public information issuance)

1. The step to troubleshoot your touchscreen system is to determine if the problem is related to the display, software, or hardware: 2. Don't confuse display issues with touchscreen issues, the two are unrelated. 3. Software issues are identified by basic hardware functional testing. If the hardware is ...

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

USB cable specification: HI-SPEED USB Revision 2.0 SHIELDED 24AWG 1. The USB port of the computer must support standard USB 2.0 or USB 3.0. 2. The USB cable needs to be double-layer isolated: aluminum foil and copper mesh isolation. 3. The length of the USB cable is not ...

1. Novelty of operation The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to be touched by mistake Because the capacitive touch screen needs to sense the current of the human body, as long as the human body can operate it, there will be no ...

1. Background color: Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background; Hatch: In the background, tick the fill, select the pattern color and pattern. 2. Picture/Background Image: Select Picture Element ...

Virtual serial port configuration process: 1. Open the virtual serial port configuration software and create two pairs of serial ports; 2. The circle is the physical serial port in the computer, and the virtual serial port in the box; 3. Two groups have been added, and friends who want to add port tests can do so in the window on the right.

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...