The method of touch calibration on the touch screen of Weiluntong

1. Open the Weiluntong editing software, and click Event Login in the pop-up menu bar on the right. 2. On the edit page of event login, we click the new button below, and then a setting page for alarm login will pop up.

If we look at the sample manual, we will find that the I/O interface of the Weiluntong touch screen also includes several types, such as USB port, Ethernet port, serial interface, which we see a lot, as well as SD card slot, WIFI, CANBUS, sound output, image input, etc. Like USB ...

Weiluntong touch screen, also known as "touch screen", "touch panel", is a kind of inductive liquid crystal display device that can receive input signals such as contacts, when touching the graphic buttons on the screen, the haptic feedback system on the screen can drive various connection devices according to the pre-programmed program, which can be ...

The cMT X series models are recognized and trusted by users for their excellent functions and stable performance. Therefore, after the launch of the standard and advanced cMT X series models, Weiluntong Technology has launched the cost-effective cMT X basic human-machine interface: 　　It can meet the needs of only a single network port and traditional ...

Advantages of infrared touch screen: 1. High stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no ...

Merit: 1. The resistive touch screen has high accuracy, which can be at the level of pixels, and the maximum resolution can be up to 4096x4096. 2. The screen is not affected by dust, water vapor and oil, and can be used in a lower or higher temperature environment. 3. Resistive contact ...

1. The screen is powered off, and the first DIP switch behind is dialed to the ON position; 2. Power on again, a white cross cursor will appear on the screen, click the middle of the cross cursor vertically, after the point (the time can not be too short), the cross cursor will automatically jump to the next position, the cross light ...

The new cMT-iV6 is a touchscreen with a built-in cMT Viewer that can be connected and monitored to multiple cMT-SVRs or cMT series machines at the same time. The cMT-iV6 is equipped with a 9.7-inch screen with a resolution of 1024×768, a built-in speaker and a high-performance 1GHz processor.

1. The touch all-in-one machine can carry out the dynamic display of the three-dimensional model of the object, and has a good interactive experience function. The audience can operate by themselves through the touch all-in-one machine, and "touch" the object at zero distance on the screen, and the audience can also rotate and zoom in arbitrarily on the touch all-in-one screen.

Due to the environmental adaptability of Weilun touch screen, especially the surface sound wave screen, the screen will affect the normal use due to water droplets, dust and other pollution, so the touch screen also needs regular maintenance like ordinary machines. 1. Wipe the screen with a dry cloth every day before turning it on.

Four-wire: Because of factors such as cost and mature technical level, four-wire touch screen is almost the most basic production specification for touch screen practitioners. First of all, in terms of resistive touch screen technology, four-wire touch screen accounts for more than 50% of the market. It is composed mainly ...

Since the launch of the cMT-SVR, the innovative body and screen separation architecture has subverted the market's imagination of HMI. With the continuous cultivation of Weiluntong, this unique detached HMI has gradually gained a foothold in the market and is now widely used in the market. 　　In order to meet the needs of the new generation of industrial Internet of Things ...

1. Locate the relevant property. In the property settings of the touch screen, find the properties that need to be set, such as touch screen input, output, communication and other related attributes. 2. Set the properties. Set the appropriate property values as needed. If some properties don't have predefined options, ...

Due to the technical limitations and different equipment environment, the screen will not be able to be used normally due to water droplets, dust and other pollution, so the touch screen also needs regular maintenance like ordinary machines, and because the touch screen is a touch all-in-one machine with a high degree of integration of a variety of electrical equipment, so in ...

1. The memory address is different. The memory address of the PW touch screen uses the local hold register, while the memory address of the RW uses the hold register index to send RWI. 2. The address range is different. The address range of the LW of the touch screen is 0 to 524287, while the address range of the RW is 0 to .

1. The touch screen controls the inverter through PLC 1. At present, the general control inverter needs to use PLC to communicate with the inverter, read the information of the inverter, and then the touch screen communicates with the PLC to complete the control of the inverter to start and stop, and monitor the operation of the inverter.

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

cMT3151 can be stored in the form of data streaming, avoiding the SD card or USB when storing data due to falling off and unable to produce a complete storage record; At the same time, the abnormal operation of the machine is recorded, and the user is assisted in tracking and analyzing the source of the problem. cMT-iPC15 Built-in Error Correction Code (ECC) ...

1. Connect the touch screen with the PLC We know the communication between two pieces of hardware, whether wireless or wired. The first step is to establish a connection. The most common connection between PLC and touch screen is serial data cable connection. The data cable can be used in a treasure ...

　　Human-computer interface (also known as user interface or user interface) is the medium of interaction and information exchange between the system and the user, which realizes the transformation between the internal form of information and the form acceptable to humans. Human-machine interfaces exist in all areas involved in the exchange of information between humans and machines. 　 ...