3.1 What should I do if the touch screen shows garbled characters?
Select "Oriental Language" in the EB500 software "Options/Language Selection", and then compile it after saving it so that there will be no garbled characters.
3.2 Why can't the following window appear when editing EB500 software, and it is blank?
It's that the windows in the software are opened too much, causing problems to appear, just close some windows.
3.3 How to open the CMP format files on the CD and website?
The file with the suffix CMP is a kind of compressed file pattern of EB500 software, which must be opened after decompression by using the decompression function in EB500. Select "File/Closure", you can close all the windows in the software, so that the whole picture is gray, and then select "Stuff/Shrink/Unwrap", click the "Browse" button in the source file column of the "Unpack" item, click on Unpack, and the progress will show success. The decompressed file is the file with the suffix epj that can be opened directly with EB500.
3.4 How to open a file with the suffix eob uploaded from the touch screen to the computer?
The EOB file can only be opened after the EB500 compiles and needs to be decompiled, and the windows in the software are closed, so that the whole picture is gray, and then select something/decompile, and finally browse the file, click on decompilation, and the progress is completed.
3.5 What should I do if I double-click the icon of the finished project file and the bitmap is lost?
The programmed screen program cannot be opened directly in this way, and needs to be opened through the path from the EB500 software
|
More on that
|
How does the Weilun touch screen communicate with Mitsubishi PLC
1. Open the Weilun software;
2. Click "Edit" - system parameters;
3. Enter "Mitsubishi model" in the pop-up dialog box name;
4. Check the "PLC" below to select the PLC type;
5. Communication can be realized by connecting the machine with a communication line.
...
|
|
What is the reason why the touch screen cannot be turned on after restoring the factory settings?
1. Check that the power cord is plugged in and if there is electricity. If there is no electricity, you can replace the cord or plug.
2. Check if the power switch is on. If it doesn't turn on, you can try turning on the power switch.
3. Check if the battery is charged. If the battery is low ...
|
|
Veriton: With it, HMI can also diagnose PLCs remotely!
With the advent of the Internet of Things (IoT) era, more and more PLCs and controllers support web servers, which are convenient for users to directly modify the content of various system parameters in the equipment and monitor their operating status through the "web interface".
In the face of this trend, Weilun Tong new ...
|
|
Weiluntong touch screen - the use and maintenance characteristics of industrial touch screen
Due to the technical limitations and different equipment environment, the screen will not be able to be used normally due to water droplets, dust and other pollution, so the touch screen also needs regular maintenance like ordinary machines, and because the touch screen is a touch all-in-one machine with a high degree of integration of a variety of electrical equipment, so in ...
|
|
What are the main applications of touch screen?
Store Payments
The checkout counter of the store now uses a computer interactive terminal device. By operating the touch screen, the customer may print out a payment slip with the name and price of the goods. On the terminal, you can use the full-screen video image to promote the product, and the customer can ...
|
|
Velun Tong Touch Screen EBPro Software Knowledge Points(25-29)
25. Bit status switch switch, bit status indicator, equipment linkage:
Through the bit state switching switch element OFF->ON, the macro command is executed: the bit status indicator is set to the ON state;
Select the execution macro through the PLC control, select the trigger mode ON->OFF, and set the bit ...
|
|
Velun Tong Touch Screen EBPro Software Knowledge Points(1-17)
1. Background color:
Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background;
Hatch: In the background, tick the fill, select the pattern color and pattern.
2. Picture/Background Image:
Select Picture Element ...
|
|
How to update the software of Velonton
1. Copy the required OS to a USB flash drive (FAT32 format is only supported); For example, in the next test, place the OS file in the firmware folder at the root of the USB flash drive.
2. Plug the USB flash drive into the USB host port of the HMI to be updated;
3. Click the arrow in the bottom right corner of the screen ...
|
|
The role of the macro on the touch screen
Weilun Tong macro is a programming language for human-computer interface interaction development, which is based on a programming language developed by Microsoft in the early VB, macro provides EBPro application outside of some additional functions you need, macro is widely used, almost PLC control ...
|
|
What are the characteristics of Weiluntong touch screen - infrared touch screen?
1. The infrared touch screen does not need touch pressure, it can be operated freely even if you wear gloves, and anything can be touched.
2. Compared with the display equipped with capacitive and resistive touch screen, the picture saturation is richer and the contrast ratio is better, which improves the user's visual comfort.
...
|
|
How to adjust the time of the touch screen?
1. First of all, open the Weilun touch screen to modify the software, and be sure to choose the software corresponding to the type of touch screen;
2. Modify the required touch screen screen;
3. Then open the "System Settings" button under the "Common" menu in the upper left corner;
4. Set the pop-up window in the system ...
|
|
How does Velun Tong transfer data to USB flash drive?
1. Plug in the U disk on the touch screen, you don't need to power off the screen, the screen supports the hot-swap function, but at this time, it is best not to communicate with external devices to reduce unnecessary impact. When the screen detects an external device, a dialog box will pop up, select the second Upload Project option ...
|
|
The MENU menu could not be found on the Velon touch screen
1. Check the user manual or technical manual of the touch screen to understand the menu settings and operation methods of the touch screen of this model.
2. Try pressing other buttons or areas on the touchscreen to see if you can enter the menu settings interface.
3. If you are using third-party software or ...
|
|
How to insert the bit status indicator into the Weilun touch screen
Open the created Weilun touch screen project, select [Common] in the menu bar and click Open.
In the Common drop-down menu, select the Bit Status Indicator icon and click Open.
In the pop-up [New Bit Status Indicator] setting window [General Properties] ...
|
|
How does the Weilun Tong touch screen connect with the Omron NJ controller?
1. Omron NJ controller programming
1. The structure data type required for the new project, such as the Boolean switch to be used in this example to create a structure data type of "take-up machine IO", and the integer data used in this example to create a "take-up machine".
|
|
Veriton touch screen - the technical characteristics of touch screen
Transparent properties
Transparency, which directly affects the visual effect of the touch screen. Transparency has the problem of transparency, infrared technology touch screen and surface acoustic wave touch screen are only separated by a layer of pure glass, transparent can be regarded as a leader, other touch screens should be carefully scrutinized, "transparent", ...
|
|
Weilun touch screen communication anti-interference measures
When the HMI communication failure is caused by on-site interference, the following methods can be used to troubleshoot the fault:
The communication line adopts shielded twisted pair cable, and the shielding layer needs to be grounded at one end, that is, only one end of the PLC and the touch screen can connect the shielding layer to the ground horn (it is recommended to connect it to the HMI end of the touch screen) ...
|
|
Weiluntong touch screen common fault maintenance
(1) Fault 1: Touch deviation
Symptom 1: The position of the finger does not coincide with the mouse arrow.
Reason 1: After installing the driver, there is no vertical touch of the bullseye center position when correcting the position.
Solution 1: Recalibrate the position.
Phenomenon...
|
|
How to modify the description of the measurement point of the touch screen?
1. First of all, open the created Weilun touch screen project, select Common in the menu bar and click Open.
2. Secondly, select the system parameter icon in the common drop-down menu and click to open.
3. Finally, click Change.
...
|
|
Fault analysis and processing of Weiluntong touch screen
1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...
|
|
Contact
working hours
