1. It can meet the needs of many electrical appliances, and relatively speaking, in the process of making industrial control cables, the relevant standards of various information in the process of dissemination are fully considered. In this way, it can be ensured that the industrial control cable can meet the performance of many electrical appliances in daily work. This is a very important point in the characteristics of industrial control cables, and it should be kept in mind for the majority of consumers.
2. It has the effect of anti-interference, and in the process of information dissemination, noise interference and loss are important factors that lead to information distortion. Therefore, special processing technology is used in the production process of industrial control cables. In this way, its own anti-interference ability can be relatively stronger, especially for important information, which can play a good role in protection.
3. When understanding the characteristics of industrial control cables, there is another very important factor, that is, the corresponding length is relatively easy to observe. In the process of daily use, in the process of using the relevant industrial control cables, the specific location is visually inspected, so that you can clarify your own needs, ensure the demand for the use of industrial control cables, and reduce the corresponding errors.
4. When the industrial control cable is wiring, it basically goes underground, so the wear resistance is relatively stronger, and it has a good corrosion resistance. It prolongs the service life of industrial control cables and ensures the overall quality of industrial control cables.
|
More on that
|
Rittal cabinet air conditioner fault code
The fault codes for Rittal cabinet air conditioners are: F1, F2, F3, FF, EH, EP, EL, SF, HC.
F1, F2, F3 represent improper use or failure of internal components;
FF stands for Regulation Circuit Fault;
EH stands for High Temperature Fault;
EP stands for Actuator Failure; ...
|
|
Rittal Nonwovens filter mats product description
Product Introduction
Product name: Rittal Rittal
Product Type: Rittal Non Woven Filter Mats
Product Model: 3172.105
Spare filter mats for top-mounted fans, filter fans or thermoelectric coolers to protect control cabinet components from dirt, ash ...
|
|
Rittal Cables – the application of cables
Power system
The wire and cable products used in the power system mainly include overhead bare wires, busbars (busbars), power cables (plastic cables, oil-paper power cables (basically replaced by plastic power cables), rubber cables, overhead insulated cables), branch cables (replacing part of the busbars) ...
|
|
A basic introduction to a very popular explosion-proof box in Rittal
As a commonly used box in Rittal, many users do not understand the material and structure of this series of boxes.
Now I would like to introduce the Rittal explosion-proof enclosure
Apply:
– Zones 1 and 2 or Zones 21 and 22 according to 94/9/EG
– Ambient temperature range: -30°C.
|
|
Rittal takes you through the efficient and accurate configuration of your enclosure system
In the recent Winter Olympics, short track speed skating star Wang Meng helped lock the first gold medal of the Chinese team in the Winter Olympics in advance with "My eyes are rulers". So what is the "magic weapon" that can help engineers refine the "sharp eye" of error-free assembly in the assembly of Rittal cabinet systems? ...
|
|
Rittal presents its modular data centre solutions
Now AI has been widely used in many fields, and while we enjoy the convenience brought by AI skills, we should also know that behind these AI skills are a huge amount of data processing and communication by weak servers, and then find the most efficient solutions.
|
|
Rittal cables – the difference between power cables and control cables
The power cable is used to transmit and distribute large-scale electrical energy in the main line of the power system, and the control cable directly transmits the electric energy from the distribution point of the power system to the power connection line of various electrical equipment and appliances. The rated voltage of power cables is generally 0.6/1KV and above, and the control cables are mainly 4 ...
|
|
Analysis of the reasons why the Rittal Rittal cabinet air conditioner shows OL
The probable cause is the phenomenon of the compressor protection device tripping.
Compressor overload protection will trip, indicating that the system is too high-pressure, the pressure is too high, or the overheating current is too high.
Causes and elimination of high pressure and overheating:
1. Too much refrigerant. Reduce the refrigeration dose appropriately.
2， ...
|
|
Rittal cabinets – Q&A on the basics of high and low voltage distribution cabinets
How many types of protection devices are there for transformers?
A: Overcurrent protection, current quick break protection, differential protection and gas protection.
What are the requirements for relay protection?
Answer: In order to be able to remove the fault correctly and quickly, it is required that the relay protection has sufficient selectivity ...
|
|
Alarm code causes and diagnostic methods for Rittal cabinet air conditioners
Alarm code: A01
System message: Open the cabinet door
The cause of the Rittal air conditioner: the opening and closing of the door is not in the correct position
Diagnostic method: Check the changing position of the door and, if necessary, the connection status
Alarm code: A02
System message: The temperature in the cabinet is too high
...
|
|
To help industrial upgrading with ingenuity and quality, Rittal and liquor companies talk about smart brewing
China has a long history of winemaking. "Shuo Wen Jie Zi" once said: The ancients Yi Di made wine mash, Yu tasted it and was beautiful, so Yi Di was sparse. Du Kang made rice wine.
Counting from the Yu period, liquor has a history of more than five or six thousand years in China, it is not only the inheritance of good taste, but also the long history of the Chinese nation.
|
|
Rittal Cables – what are the ways to lay wires and cables?
1. Buried laying
The laying method of laying the cable immediately underground is called buried laying. The buried cable must be armored cable and anti-corrosion coating protection cable, and the bare cable cannot be buried. Generally, the depth of the cable trench shall not exceed 0.9m, and the buried laying shall be paved ...
|
|
Rittal X SF | Helping smart logistics airports set sail safely
Hello, your courier has been sent out and will be delivered tomorrow morning.
Perfect logistics network, intelligent sorting, digital control ...... The development of modern logistics has made logistics services increasingly efficient and fast, and timely delivery and next-day delivery are no longer slogans.
|
|
Rittal cabinets – Q&A on the basics of high and low voltage distribution cabinets
What is eddy current? What are the harms of eddy currents?
Answer: When an alternating current is passed through a wire, an alternating magnetic field is created around the wire. An induced current is generated inside the whole conductor in an alternating magnetic field, and because this induced current forms a closed loop inside the whole conductor, ...
|
|
Rittal Cables – precautions for the installation and wiring of control cables
Precautions for the installation and wiring of control cables:
1. Under the eaves. Cables can only be used if they are not directly exposed to sunlight or ultra-high temperatures, and it is recommended to use pipes. Ultraviolet (UV) – Do not apply cables without UV protection to direct sunlight rings ...
|
|
Air conditioner shows H1 fault code solution – Rittal
1. The air conditioner displays the H1 fault code - the reason
When the outdoor temperature is low and the humidity is high, the heat exchanger of the outdoor unit will be frosted after the air conditioner runs for a period of time, then the automatic defrost function will be activated, and the heating operation will be temporarily stopped for 5-10 minutes. Air conditioner heating defrost shows H1 which is normal ...
|
|
Common fault codes and handling methods for Rittal cabinet air conditioners
1. E0: Indoor temperature sensor is faulty. When this fault code appears, you need to check whether the indoor temperature sensor is working properly.
2. E1: Outdoor temperature sensor failure. When this fault code appears, you need to check whether the outdoor temperature sensor is working properly.
3. E2 ...
|
|
Rittal cabinets – what are the common cabinet cable management processes?
First, the waterfall shape
This is one of the older wiring patterns that can sometimes be seen. It adopts the artistic image of "Huaguo Mountain Water Curtain Cave", and directly hangs the twisted pair from the module of the patch panel, and there is a very beautiful sense of hierarchy when it is neatly distributed (24-48 per layer).
|
|
How do I set the temperature of my Rittal aircon by remote control or panel?
The temperature setting of the Rittal air-conditioner can be operated via a remote control or a panel. The specific steps are as follows:
1. Turn on the power of the air conditioner and press the "on/off" button on the remote control or the power switch on the panel.
2. Press the "Mode" button on the remote control or the ...
|
|
How to use Rittal cabinets
1. Tie the cable tie at the beginning of the root of the cable with a cable tie, if there are too many cables, the number of the network cable is divided into two or many parts from the center, but the demand ensures that each part of the network cable is connected, because the next step is simple.
2. According to ...
|
|
Contact
working hours
