What are the ways to enter the system setting of the TK6070ih touch screen?

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

The human-machine interface is not just a simple operation screen, but more and more integrated into new functional elements such as network technology, remote control, video input, etc., and has gradually evolved into a networked information control platform integrating display, monitoring, communication and operation. And in this wave of innovation ...

Check whether the connection interface is loose, and then check whether Serial Port and Interrupt Number conflict. If there is a conflict, adjust the resources to avoid the conflict. Then check the surface of the touch screen for cracks. If there is a crack, replace it in time. It is also necessary to check the touch screen table ...

25. Bit status switch switch, bit status indicator, equipment linkage: Through the bit state switching switch element OFF->ON, the macro command is executed: the bit status indicator is set to the ON state; Select the execution macro through the PLC control, select the trigger mode ON->OFF, and set the bit ...

Advantages of infrared touch screen: 1. High stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no ...

1.1 How to delete the job button on the taskbar of the touch screen? Set "Modify/Set System Parameters/General/Job Buttons/Features" to "Closed". 1.2 What does RS485 Default/RS485 2W/RS485 4W Separation mean in the communication port type? r ...

1. First of all, open the Weiluntong touch screen and enter the application. 2. Secondly, select "Edit" → "Personalization" on the control bar of the window. 3. Finally, set the picture to the bottom layer. ...

1. The screen is powered off, and the first DIP switch behind is dialed to the ON position; 2. Power on again, a white cross cursor will appear on the screen, click the middle of the cross cursor vertically, after the point (the time can not be too short), the cross cursor will automatically jump to the next position, the cross light ...

4. Use Fault 4.1 What should I do if the newly purchased touch screen downloads the programmed program and it cannot be touched or the touch freezes? First of all, hit the No. 2 DIP switch on the back of the screen to the direction of on, and then power on to see the copyright of the last line of the screen.

1. The industrial touch panel PC is an all-in-one structure, and the host, LCD monitor, and touch screen are integrated, and the stability is relatively good. 2. The use of more popular touch function can simplify the work, more convenient and fast, and more humane. 3. Industrial touch panel PC ...

1. TK series (simple and practical, widely used) 1、TK8071iP 7" TFT display 800*480 dots, brightness 350, contrast ratio 500:1, 16M color, 128MB memory, DC10.5——28VDC power supply, four-wire resistive type, overall dimensions 200.4*146.5*34m...

Weiluntong touch screen, also known as "touch screen", "touch panel", is a kind of inductive liquid crystal display device that can receive input signals such as contacts, when touching the graphic buttons on the screen, the haptic feedback system on the screen can drive various connection devices according to the pre-programmed program, which can be ...

1. Open the touch screen of Weiluntong, click "Alarm Information" on the left menu bar, and enter the "Alarm Information Management" interface; 2. In this interface, you can see all the current alarm records, click "Function", select "Clear All Alarms", you can clear all historical reports.

1. The step to troubleshoot your touchscreen system is to determine if the problem is related to the display, software, or hardware: 2. Don't confuse display issues with touchscreen issues, the two are unrelated. 3. Software issues are identified by basic hardware functional testing. If the hardware is ...

1. Touch failure; 2. Touch the glass plate is broken; 3. The key is damaged and the key is not effective; 4. White vertical bars, horizontal bars, and bright lines appear; 5. Half can be touched, half can not be touched; 6. Can't enter the program; 7. The touch screen cannot be calibrated.

Precautions when using Verun Tong inverter 　　When shipping and storage During the storage period, it is necessary to ensure that the inverter is not subjected to physical shocks and oscillations. It is also necessary to ensure that they are not exposed to rain and are not placed in places where the ambient temperature is too high. When transferring, hold the bottom of the body ...

1. Check if the touch screen is clean: If there are stains or grease on the surface of the touch screen, it will cause the touch to be insensitive or slow to respond. The touchscreen surface can be cleaned using a specialized touchscreen cleaner or a clean cloth. 2. Check if the touch screen is damaged: If the touch screen surface is damaged, ...

1. The memory address is different. The memory address of the PW touch screen uses the local hold register, while the memory address of the RW uses the hold register index to send RWI. 2. The address range is different. The address range of the LW of the touch screen is 0 to 524287, while the address range of the RW is 0 to .

1. Copy the required OS to a USB flash drive (FAT32 format is only supported); For example, in the next test, place the OS file in the firmware folder at the root of the USB flash drive. 2. Plug the USB flash drive into the USB host port of the HMI to be updated; 3. Click the arrow in the bottom right corner of the screen ...