SIASUN Robot - maintenance method of joint robot arm

Automatic tightening The intention of the SCR5 collaborative robot screw active tightening is to supply the screws to the screw in an orderly manner through the screw active feeder, and the end of the robot is equipped with a tightening module, and the electric CNC screwdriver can tighten the screws in the specified direction after tightening the module.

SIASUN Co., Ltd. is the international headquarters of SIASUN Robot Group in Shanghai, and is one of the two major headquarters institutions in SIASUN Group's "2+N+M" strategic layout, and is committed to building an international, platform-based and innovative robot industry benchmark. The company is a high-tech ...

In recent years, with the continuous attention of major manufacturers and the capital market, its innovative application models have been emerging, and the application scenarios have become increasingly diversified. At present, a number of excellent robot companies have emerged in China, deeply cultivating robot technology and helping the high-quality development of China's intelligent manufacturing. Policy for industrial machines ...

Use of technology 1. The trigger switching adopts IExprober technology under the IEAgent platform. (1) The use of anti-interference amplification technology can ensure that the patient's minimum breathing work is synchronized. (2) The use of independent signal source detection technology can be used in a large number of patients to leak air, pipeline vibration, etc.

1. When using the manipulator, clean and dry compressed air must be used. 2. This device is only allowed to be enabled when it is in good physical condition. 3. Check whether the corresponding load-bearing bolts are loose before use. 4. Before each use, check the equipment for wear or damage. In the absence of ...

Recently, Nanjing Auto Smart Digital Technology Co., Ltd. (hereinafter referred to as "Auto Digital") and Advantech jointly announced that they have reached a strategic partnership, which will create a new situation of strong alliance, complementary advantages, mutual benefit and win-win, and jointly welcome the magnificent era of intelligent manufacturing! ...

1. Manipulators can be divided into pneumatic, hydraulic, mechanical and electric manipulators according to the driving mode; 2. According to the use, it can be divided into two types: manipulator and general manipulator; 3. According to the way of motion control, it can be divided into point control and continuous trajectory control manipulator. ...

On March 19, the winners of the 7th China Industry Award, the highest award in China's industrial field, were officially announced in Beijing, and SIASUN won the nomination award of China Industry Award for its outstanding performance in scientific and technological innovation, brand culture and intelligent manufacturing. This honor reflects China's ...

1. The robot cannot be started: 1. Whether the emergency stop button is screwed up 2. Check whether the switches of each safety door are normal 3. The mode switch on the control box is in manual state, and the emergency stop switch on the teach pendant is pressed 4. Check whether there is a tray 5. Machine ...

(1) No cumulative error, high accuracy; (2) the driving device can be placed on the fixed platform or close to the position of the fixed platform, so that the moving part is light in weight, high in speed, and has good dynamic response; (3) Compact structure, high stiffness and large bearing capacity; (4) Perfect symmetry ...

Robot maintenance before start-up of the inspection work: 1. The equipment must be checked before starting, and the equipment can only be turned on after confirming that the equipment is in good condition; 2. Inspect and clean the operation site to ensure that there are no flammable materials (such as tarpaulin, waste oil gloves, paint, coke water, etc.) and no air leakage; ...

From July 21st to 23rd, the "2021 Wuhan Special Purpose Vehicle Automated Welding Technology Application Seminar" co-sponsored by the China Association of Automobile Manufacturers and Hanyang Special Purpose Vehicle Research Institute was held as scheduled. SIASUN, as a provider of fully intelligent products and services, was invited to bring the solutions for the special vehicle industry accumulated over the years.

Generally speaking, the vision system of a mobile robot consists of the following components: 1. One or more optical signal generators, which can be natural light signal transmitters such as reflected light from the ambient light of objects, or artificial light signal transmitters such as flash lamps and laser light sources. 2、 ...

Classification according to the structure of articulated robots: 1. Five-axis and six-axis articulated robots Possessing five or six axes of rotation, similar to a human arm. The application areas are loading, unloading, painting, surface treatment, testing, measurement, arc welding, spot welding, packaging, assembly...

Shanghai Industrial Technology Innovation Promotion Association, together with the Municipal Association for Science and Technology, Lingang Group and other units, released the "2022 Shanghai Top 100 List of Hard-core Technology Enterprises", and SIASUN was successfully selected. The list evaluation involves 1993 enterprises, covering the city's national and municipal enterprise technology centers, listed companies, emerging ...

1. Analysis of the use requirements: each robot is designed according to the generation of specific requirements, and the first step of the design is to analyze the use requirements clearly and determine the parameters that need to be considered when designing, including: the positioning accuracy of the robot and the repeated positioning accuracy; The load of the robot ...

1. Static platform: used to place and fix the servo motor and intermediate shaft to ensure the smooth operation of the high-frequency and high-intensity working environment. The static platform is used to install and fix the top mechanism of the parallel robot, including all the servo motors, all in this place. This place has several ...

Sort out the phenomenon of a robotic arm noise, if such a phenomenon is found on site, please overhaul the equipment as soon as possible! Safety Matters: It should be said that once the air pressure of the balancer is released, the phenomenon of 2 and 3 shafts falling may occur. At this time, if you release the motor brake ...

1. Degrees of freedom movement, the spatial angle between each degree of freedom is a right angle; 2. Automatically controlled, reprogrammable, all movements are run according to the program; 3. It is generally composed of a control system, a drive system, a mechanical system, and an operating tool. 4. Spirit...

SIASUN autonomously conquered autonomous driving robot technology and quickly introduced it to the market For a long time, autonomous robot technology has been concentrated in a few developed countries, and it is expensive, and the high procurement cost has discouraged the domestic market. With the rapid development of domestic independent brand cars in recent years...