Screen structure: ITO Film and ITO Glass are laminated, and the middle is isolated by a DOT point Outlet cable:
FRC copper cable (flat conduction wire) length: 200mm
Connection location with touch screen:
Bearing force: 2.0 kg horizontally with the screen, 1.0 kg perpendicular to the screen
Connection: 5-point welding and glue fixing
Folding: Withstands 180 degree stacks, 10 reps (113)
Specification: ETC NO.: ET-88T-12-102-C00
Connector: 2.54mm receptacle, standard AMP87499-9
Touch media: fingers, gloved hands, pens, credit cards, etc
Screen thickness: 1mm-5mm
Screen size: Screen size 6 inches-21 inches
Resolution: Resolution 4096x4096
Response time: less than 10 milliseconds (finger input)
Touch strength: 15-40gr with a hardness of 600 and a diameter of 16mm silicone
Screen error: Screen error less than 1 [%]
Voltage: DC+5V
Screen resistance: 40Ω - 100Ω (Between X-Y); 50Ω——110Ω(BetweenX-LX)； 50Ω——110Ω(BetweenY-LY)； 40Ω——100Ω(BetweenLX-LY)
Insulation resistance: greater than 20M0 at DC25V
ESD protection: Level 4 according to EN6100 (15 kV air discharge/contact discharge 8 kV)
Transmittance: 75-85% (at 550 nm)
Operating temperature: -20°C-70°C
Storage temperature: -25°C-80°C
Operating humidity: 90%RH at 40°C (no condensation)
Operating temperature: -20°C-70°C
Storage temperature: -25°C-80°C
Damage resistance: 3-12mm special process fully tempered optical glass as the base material. Use 1 pound at a height of 130 cm to make it fall freely to the center of the glass without the glass breaking.
Sealing characteristics: The highly sealed material tightly seals the filter, frame and vandal-proof glass to prevent liquid leakage;
Operating temperature: -20°C-70°C
Storage temperature: -40°C-85°C
Operating humidity: 90%RH at 40°C (no condensation)
Storage humidity: 90%RH at 40°C (no condensation)
Sealing: NEMA4 and IP65 compliant
High temperature storage: 80°C test for 240 hours
Low temperature storage: -25 °C test for 240 hours
Durability: 3H on the Mohs scale (according to ATSM D3363)
Service life: more than 1 million times a single touch (Polyester stylus) >5 million times a single touch (Rubber stylus)
Safety Certification: FCC. CE、TUV、UL
|
More on that
|
How to choose the touch screen model in Kunlun Tongtai software
How to choose the touch screen model in the Kunlun Tongtai software, this is selected according to the model of the touch screen.
Before you can choose a model, you need to determine what type of touchscreen you use on your device. Different models of touch screens, some with high configuration, some with low configuration, but the configuration is ...
|
|
Kunlun Tongtai touch screen - six different classifications of touch screens
1. Resistive touch screen
Analog resistive screen
The analog resistive touch screen is what we usually call the "resistive screen", which is a kind of touch screen that uses pressure sensing to control.
It is made of two layers of ITO plastic film coated with conductive function, and the two ITO are equipped with microparticle supports.
|
|
Kunlun Tongtai touch screen - common faults and fault analysis of resistive screens
Fault 1: Touch deviation
Phenomenon: The position of the finger does not coincide with the mouse arrow.
Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position.
Fault 2: Touch ...
|
|
The reason for the communication failure between Kunlun Tongtai touch screen and Mitsubishi PLC
Communication failures are generally due to three factors
(1) Communication parameters, such as the COM number of the serial port, baud rate, etc., the IP address of the network port, etc.
(2) Communication line, such as RS232 communication, the result is RS485. For example, it is directly connected to the network port, but it is connected to the cross.
（3 ...
|
|
How to set the Kunlun Tongtai touch screen and PLC communication is normal
1. First of all, open the Kunlun Tongtai touch screen software, find the [User Window] and click to open.
2. Then select [New Window] to create two windows.
3. Then in the page that opens, click [Window 0] to enter the window.
4. Then in the toolbox ...
|
|
The solution of Kunlun Tongtai touch screen booting white screen and unable to connect to the computer
1. First on the computer, use the right mouse button on My Computer - Properties to open the properties page, and then find and select the advanced system settings option in this page.
2. Then in the dialog box that opens, switch to Hardware Options.
3. Then under the hardware options, look for ...
|
|
Common Problems and Solutions of Communication of Kunlun Tongtai MCGS Touch Screen(66-69)
66. Mitsubishi PLC: How to choose the driver for programming port communication
Mitsubishi PLC programming port is 422 communication, and Mitsubishi FX series programming port is selected; The 232BD is driven by Mitsubishi FX series programming port; The 485BD is driven by Mitsubishi FX series serial port.
67. Mitsubishi PLC: Programming port parameter setting ...
|
|
Hardware Problems and Solutions of Kunlun Tongtai MCGS Touch Screen(81-85)
81. What are the main characteristics of 128M TPC?
(1) CE platform upgrade
Using WINCE 5.0 operating system, user operation methods and habits are the same as those of the previous CE 4.2 system;
(2) Hardware storage device upgrade
The total storage data capacity of the product has increased from the existing 6 ...
|
|
Kunlun Tongtai touch screen - the component classification introduction of resistive touch screen
Four-wire touch screen
The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...
|
|
Autumn is full of Kunlun Tongtai Weifang set sail again
In 2015, when the automation industry entered the new normal, the HMI industry broke out of the cocoon, and as the leader of the local HMI, Kunlun Tongtai began to attack in March and traveled around China in a huge momentum of roving seminars. Fans gathered, big coffee reviews, player support, broke out 18 ...
|
|
The connection of Mitsubishi 5U PLC and Kunlun Tongtai touch screen
First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen.
1. Click on the device window to enter the Add PLC
2. First add a TCP parent serial port, and add a 5U device below
3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...
|
|
Kunlun Tongtai touch screen - the advantages and disadvantages of resistive screen
merit
The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...
|
|
The operating environment of Kunlun TPC project is automatically restarted
The operating environment of Kunlun Tongtai TPC project was actively restarted
If the CPU usage reaches 99% during project operation, the operating environment will be automatically exited and then started from the beginning.
The reasons for high CPU usage may be: too many bitmaps, loops, etc.
|
|
The composition of Kunlun Tongtai MCGS embedded configuration software
The user usage system generated by the embedded version of MCGS consists of five parts: the main control window, the equipment window, the user window, the real-time database and the operation strategy.
1. Main control window: the main structure of the use system is structured. Used for ...
|
|
The configuration structure of Kunlun Tongtai McgsPro software was introduced from the overall structure
The McgsPro architecture is divided into three parts: configuration environment, simulated operation environment, and operation environment.
The configuration environment and the simulated operating environment are equivalent to a complete set of tools and software, which can be run on a PC. Users can ...
|
|
Kunlun Tongtai TPC1062K the fault repair that occurs when the touch screen is touched
1. The touch screen is not allowed to be repaired
If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If you touch some areas accurately ...
|
|
Kunlun Tongtai touch screen - maintenance method of resistive touch screen
1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection.
2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.
|
|
Kunlun Tongtai touch screen - the introduction of the component classification of resistive touch screen
Four-wire touch screen
The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...
|
|
Hardware Problems and Solutions of Kunlun Tongtai MCGS Touch Screen(96-100)
96. How to check the status of the PC connection to the TPC network?
Connect the PC to TPC with a network swap cable, click "Start-Run" on the PC, enter CMD enter in the run bar, and then enter the ping IP address in the DOS interface.
|
|
The solution to the touch failure of the industrial touch screen
1. Check the wiring port: first check whether the wiring interface is loose, and then check whether the serial port conflicts with the interrupt number. If a conflict occurs, adjust resources to avoid it. Check the surface of the industrial touch screen again for cracks, and replace it in time if so. At the same time, inspect the surface of the industrial touch screen ...
|
|
Contact
working hours
