Rexroth servo valve debugging method

1. Guiding ideology: 1. The pressure depends on the load oil pump, and the output pressure is inversely proportional to the flow rate. In the state of electronic control, when the external load increases, the system pressure increases, when the system pressure increases, the pressure of the front pump oil flow and the rear pump oil flow into the rear pump increases, and the computer detects the ...

1. Characteristics of the medium 1) Different varieties of solenoid valves are selected for gas, liquid or mixed state; 2) The medium temperature is different for products of different specifications, otherwise the coil will burn off, the seal will age, and the life of the product will be seriously affected; 3) The viscosity of the medium, usually below 50cSt. If...

There are 3 precautions when installing a hydraulic pump in the hydraulic system: 1. The coaxiality deviation between the hydraulic pump drive shaft and the motor drive shaft is less than that, and the flexible coupling joint is generally used, and the V-belt is not allowed to directly drive the pump shaft to rotate, and the pump shaft is subjected to excessive radial force, which affects the normal operation of the pump; 2 ...

In general, there are two ways to adjust it 1. Add a speed regulating valve at the outlet of the pump to adjust the output speed of the oil volume, so as to achieve the amount of oil used 2. Add a variable pump with oil volume, adjust the angle of the oil pan to achieve the input quantity of changing the oil volume. This method compares ...

On March 4th, as a well-known intelligent packaging exhibition in Asia, China International Packaging Industry Exhibition Guangzhou was grandly opened. As the world's leading supplier of complete automation systems, Bosch Rexroth offers a high level of automation and electrical control and linear drive technology.

A Rexroth hydraulic motor is an actuator of a hydraulic system that converts the liquid pressure energy provided by a hydraulic pump into the mechanical energy (torque and speed) of its output shaft. Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, etc.

1. For easy operation and maintenance, the valve is generally installed upright on the horizontal pipeline. 2. The installation of Rexroth pressure reducing valve DR6 must be in strict accordance with the direction of the arrow on the valve body to keep consistent with the direction of fluid flow. If the water quality is not clean and contains some impurities, it must be decompressed at Rexroth ...

Proportional control valve is a kind of control valve that continuously and proportionally controls the flow, pressure and direction of the hydraulic system according to the input electrical signal, and its output flow and pressure can not be affected by load changes. Compared with ordinary hydraulic components, proportional valves have the following characteristics: （ ...

Rexroth hydraulic pumps have a wide variety of applications and are available in all walks of life. In terms of pump performance, there are two types of pumps: giant pumps and micro pumps. Giant pumps can reach flow rates of hundreds of thousands of cubic meters per hour, while micro pumps can reach less than tens of milliliters per hour. Judging by the pressure of the pump, it can be ...

At a glance: 81% more widget space Fast positioning with the new navigation concept Efficient features like favorites, quick search, media management, and more The Bosch Rexroth ACTIVE Cockpit interactive software solution is suitable for a wide range of applications. ...

The emergence of "ready-to-shelf cartons" has changed the situation by bringing retailers and consumers closer together with the new carton that combines fast shelf and display. After the goods are delivered to the supermarket, the staff only needs to open the closed boxes on all sides, and the cartons are "immediately" into pallets.

1. Check the internal leakage of the boom cylinder. The easiest way to do this is to raise the boom and see if it has a noticeable free descent. If the drop is obvious, disassemble the cylinder for inspection, and replace the sealing ring if it is worn; 2. Check the control valve. First of all, clean the safety valve and check whether the valve core is grinding.

(1) Remove the burrs from each part. The sharp edge of the gear is poured with natural oil stone, but not into a fillet. The parts after flat grinding should be demagnetized, and all parts should be carefully cleaned with kerosene before they can be put into assembly. (2) Measure and ensure the axial clearance during assembly: Rexroth gear oil pump axial ...

For the field of profiling cutting, there is a growing demand to increase productivity and shorten set-up times and CNC interpolation time. The Bosch Rexroth MTX CNC system provides the perfect basis for machine builders and users to meet the growing challenges and at the same time comply with the requirements of the OPC UA standard for Industry 4.0 communication ...

1. Preparation before starting: check the fastening of each component; Check the oil level of the oil tank, the height of the oil level is subject to the engraving line of the oil window on the oil tank, N46 in summer, N32 hydraulic oil in winter. High-pressure pumps and pumps above 140 should use the same type of anti-wear hydraulic oil. Check the pressure gauge range, liquid ...

Rexroth Pressure Reducing Valve Failure Analysis: 1. Air is mixed into the oil 2. The damping hole is sometimes clogged 3. The roundness of the hole between the slide valve and the valve body exceeds the regulations, so that the valve is stuck 4. The spring is deformed or stuck in the spool valve, making it difficult for the spool to move or the spring is too soft 5.

1. Large inclination components: all specifications have the same 40 degree inclination angle, high power, small size, high efficiency and economical structure. 2. Monolithic conical plunger with two sealing rings 3. The bearing structure is easy to install and maintain, and has a long service life. 4. Specially improved series of ...

1. Daily maintenance 1) Strictly implement the post operation method and carefully fill in the operation records. 2) Check the bearing temperature and oil pressure regularly; Check the level height of the lubricating oil every shift. 3) Check whether there is leakage in the sealing part once per shift. 4) Do a good job in each shift ...

Minor and heavy faults of Rexroth inverters: 1. Minor faults include: inverter over-temperature alarm, cabinet over-temperature alarm, cabinet door opening, unit bypass, etc. The system does not remember the fault of the light, only the fault indication, and the alarm will be automatically eliminated after the fault disappears. During the operation of the inverter, if ...

1. The output flow of the hydraulic pump is insufficient or does not output oil Piston pumps often suffer from insufficient suction, excessive leakage, or too small an inclination angle. The insufficient suction volume is mainly caused by the high resistance of the suction pipe or the insufficient oil replenishment, such as the pump speed is too fast and the oil level is too low; Excessive leakage ...