Conventional domestic travel switch
LX19-001/111 in the LX19 series, LXK3-20S/T in the LXK3 series, JLXK1 series JLXK1-111/411/511 in the conventional travel switch are the most representative, these products have the advantages of simple structure, practical function and low price, and are favored by the majority of users.
Inlet travel switch
Imported travel switches WL series, HL series, D4V series, SZL-WL series are the most representative, such products have fine workmanship, superior performance, and more outstanding performance in extreme environments, which has won a large number of fans, but the high price also makes many users staggered
High temperature resistant travel switch
The most influential among the domestic high-temperature travel switches is the YNTH series high-temperature travel switches, which are generally used in steel mills. YNTH travel switch can work normally in a high temperature environment, the maximum working temperature is 350 degrees, the temperature of the working environment increases, the life of the product will decrease accordingly, more than 300 degrees to reduce the workload of the switch to ensure the life of the product. This series of travel switches have low price and stable performance, and have won unanimous praise from our customers.
Waterproof travel switch
Among the domestic waterproof travel switches, the YNFS (TZ) series is more prominent. YNFS travel switches have the characteristics of small size, high sensitivity, strong sealing, oil resistance and corrosion resistance, and the most amazing thing is that this kind of travel switch can be placed in water to work in the dust.
According to its structure, the travel switch can be divided into direct-acting, roller-acting, micro-acting and combined.
Direct-acting travel switch
The principle of action is similar to that of a button, except that one is manual and the other is collided by a bumper of moving parts. When the collision block on the external moving parts touches the button to make the contact action, when the moving parts leave, under the action of the spring, the contact automatically resets.
Its structural principle is shown in Figure F1, and its action principle is the same as that of the button switch, but the opening and closing speed of its contacts depends on the running speed of the production machinery, and it is not suitable for use in places where the speed is less than 0.4m/min. When the operating speed is less than 0.4m/min, the speed of contact breaking will be slow, and the contact is susceptible to arc cautery.
Direct-acting travel switch is composed
1: Actuator 2&4: Spring 3: Dynamic breaking contact 5: Moving contact
Roller type travel switch
When the baffle (bumper) of the motion machinery is pressed on the roller of the travel switch, the transmission bar rotates together with the rotating shaft, so that the cam pushes the bumper, and when the bumper hits a certain position, the micro switch is pushed to act quickly. When the stopper on the roller is removed, the return spring resets the travel switch. This is a single-wheel automatic recovery type travel switch. The two-wheel rotary travel switch cannot be automatically restored, it relies on the movement of the machine to move in the opposite direction, the retaining iron hits another roller to restore it.
When the collider on the controlled machinery hits the striker bar with a roller, the striker bar turns to the right, drives the cam to rotate, pushes down the pushrod, and makes the contacts in the micro switch move rapidly. When the moving machinery returns, under the action of the return spring, the action parts of each part are reset.
Roller type travel switch composition
1: Roller 2: Upper swivel arm 3&5&11: Spring 4: Sleeve
6: Pulley 7: Pressing plate 8&9: Contact 10: Transverse plate
The roller travel switch is divided into a single roller automatic reset and a double roller (horn type) non-automatic reset type, and the double roller travel switch has two steady-state positions, which has a "memory" effect, and can simplify the circuit in some cases.
Microswitch type travel switch
The composition of the micro switch type travel switch, taking the commonly used LXW-11 series products as an example, its structural principle is shown in Figure F3:
1: Actuator 2: Spring 3: Moving contact 4: Moving breaking contact 5: Compression spring
|
More on that
|
Tianyi switch - how to use the dual power transfer switch correctly
1. When the power is cut off for some reason and the power supply cannot be restored in a short period of time, the backup power supply must be enabled:
(1) Cut off the circuit breakers of the mains power supply (including the circuit breakers of the control cabinet of the power distribution room, and the mains power cut-off of the dual-power switching box), and pull the double-cast anti-backing switch to the side of the self-provided power supply, ...
|
|
Tianyi switch - what are the differences between limit switches and proximity switches?
First, the characteristics are different
1. Limit switch: The limit switch has the characteristics of small size, multiple functions, high precision, adjustable limit, strong versatility and easy maintenance, installation and adjustment.
2. Proximity switch: The proximity switch has the characteristics of a limit switch, and at the same time has the sensing performance.
|
|
Tianyi switch - the difference between high-voltage load switch and high-voltage circuit breaker
1. The high-voltage load switch can be used as a load switch, which has the effect of self-extinguishing arc, but its breaking volume is very small and very limited.
2. The high-voltage isolation switch generally cannot be used as a load switch. There is no arc extinguishing cover in the structure, and there are also disconnectors that can switch loads on and off, but the structure is different from load switches ...
|
|
Tianyi switch - the difference between disconnector and circuit breaker
1. The circuit breaker is equipped with an arc extinguishing device, so the circuit breaker can be operated with load, but it cannot operate the current of the load. The disconnector does not have an arc extinguishing device, and it can operate places where the load current is less than 5A, but it is generally not suitable for operation with load.
2. And the circuit breaker ...
|
|
Tianyi switch - the working condition of the air switch
Ambient air temperature: upper ambient air temperature +40°C; The lower limit of ambient air temperature is -5°C; The average temperature of the ambient air for 24 hours does not exceed +35 ° C.
Altitude: The altitude of the installation site does not exceed 2000m.
Atmospheric conditions: Atmospheric relative humidity at ambient air temperature of +4 ...
|
|
Tianyi switch - the role of low-voltage isolation switch
1. Through the isolation switch, it plays a good insulating role, so that the whole circuit can be safe and secure, and the maintenance personnel or staff also have enough ability to repair the circuit.
2. At the same time, the low-voltage isolation switch can also change the operation mode of the circuit, which is used in the power plant or gas plant.
|
|
Tianyi switch - 9 tests and methods for switching power supply
1. Repeated short-circuit test
◆ Test instructions
The output of the module is short-circuited in various input and output states, the module should be able to achieve protection or retraction, repeated short-circuits, and after troubleshooting, the module should be able to automatically resume normal operation.
◆ Test Method
a ...
|
|
Tianyi switch - the difference between high-voltage load switch and high-voltage isolation switch
1. The high-voltage load switch can be broken with load and has the function of self-extinguishing arc, but its breaking capacity is very small and limited.
2. The high-voltage isolation switch is generally not able to break with load, there is no arc extinguishing cover in the structure, and there is also an isolation switch that can break the load.
|
|
Tianyi switch - the characteristics of the disconnector are introduced
1. Provide an electrical interval and a visible disconnection point during electrical equipment maintenance to ensure the personal safety of maintenance personnel [3] .
2. The disconnector can not be operated with load: it cannot be operated with rated load or large load, and it cannot be divided and combined with load current and ...
|
|
Where can Tianyi switch - limit switch be used?
daily life
There are many aspects of the use of limit switches, and it is found in many electrical appliances. So what effect can such a simple switch have? It is first and foremost a chain maintenance effect. The most common example is its use in washing machines and tape recorders (video recorders). ...
|
|
Tianyi switch - what does the 2P3P of the air switch mean
2P means two poles, which means that this air switch has two connection ports, one to connect to the neutral wire and one to the live wire, which is suitable for single-phase circuit connection, or can also be used to connect two-phase power supply in a three-phase circuit.
3P is the meaning of three poles, there are three connection ports, and all of them are ...
|
|
Tianyi button indicator - button indicator induction circuit fault and solution
First, the reason for the fault of the induction circuit of the switch button indicator
1. Aging of circuit board: The circuit board of the switch button indicator induction circuit board may be aged if it has been used for too long, resulting in leakage in the circuit, and then the induction failure of the indicator light.
2. Sense ...
|
|
VTeam switch – the working principle of linear power supply
The working process of the main circuit of the linear power supply is that the input power supply is first converted into a DC power supply by the pre-regulated circuit after the initial AC voltage regulation, and then the linear adjustment element is finely adjusted under the intelligent control of the control circuit and the monolithic microprocessor controller, so that the ...
|
|
VTeam switch – how to operate a linear DC power supply correctly
1) Voltage Setting: Turn on the DC switch, adjust the voltage knob to adjust the voltage reading to the desired operating power connection. If you need to lower the voltage, turn the potentiometer slowly so that the drip rate of the voltmeter is compatible with the speed of the manual adjustment knob.
2) Constant Current Setting: Connect ...
|
|
What are the common problems of Tianyi switch - disconnector?
1. What are the common faults?
Answer: The common faults of the disconnector are: (1) The contact part is overheated. (2) Porcelain insulation damage and flashover discharge. (3) Refuse to pull and close. (4) Wrong pulling and closing.
2. The overheating of the contact part of the disconnector during operation is caused by ...
|
|
Tianyi switch - the selection of disconnector switches
Rated voltage:
The rated voltage of the disconnector (KV) = the nominal voltage of the circuit * 1.2/1.1 times.
Rated current:
The standard value of rated current should be greater than 150% of the maximum load current.
Rated Thermal Stability Current:
Select a rated ...
|
|
Tianyi switch - the use conditions and applicable places of low-voltage isolation switch
1. The basic conditions for the use of low-voltage isolation switches
(1) The altitude does not exceed 1000 meters;
(2) The ambient temperature is not higher than +40°C and not lower than -40°C;
(3) The relative humidity is not more than 85% (relative to +20±5°C).
2. The low-voltage isolation switch is not suitable for the following ...
|
|
What are the advantages of Tianyi switch - limit switch?
1. The design is usually simple and straightforward
2. Works well in almost any industrial environment
3. It has high accuracy and repeatability
4. Low-power devices
5. High inductance load can be switched
6. Used to switch multiple loads
7. Simple installation
...
|
|
What should be paid attention to in the design of Tianyi switch - switching power supply?
1. Wiring
The design requirements of wiring are very strict in the design of switching power supplies, and they must be done well to pass the test. If the designer does not handle the wiring work in the early stage of design, there will be great safety hazards in the future electricity consumption. So here I recommend you to buy a switching electric ...
|
|
Tianyi switch - the use and function of air switch
What are the uses of air switches
1. The air switch is an important electrical appliance in the low-voltage distribution network and power drive system, which integrates control and a variety of protection functions. In addition to completing contact and breaking circuits, it can also generate short circuits to circuits or electrical equipment. Severe...
|
|
Contact
working hours
