Siemens launches the new SITOP PSU2200 economical rail power supply

1. The outlet side of the Siemens inverter can not be connected in parallel to compensate the capacitor, nor can the capacitor be paralleled in order to reduce the high-order harmonics of the output voltage of the inverter, otherwise it may damage the Siemens inverter in order to reduce the harmonics. Able to connect reactors in series. 　　2. Use Siemens inverter (V...

1. Use your computer to erase the contents of the memory card through a card reader. Note: Do not format the memory card! 2. Download the latest version of the firmware file from the official website of Siemens. After downloading and unzipping, you can get a "S7_JOB.SYS" file and a "FWUOPDATE. S7S ...

If the customer has forgotten the password of the S7-1200 that was previously set, the program and password inside the S7-1200 cannot be erased through "Factory Reset", and the only way to erase the password is to use a memory card. The detailed steps are as follows: Power off the S7-1200 device Insert a ...

Recently, the "Tsinghua Wuxi Institute-Siemens Green and Low-Carbon Forum" was held in Wuxi, sponsored by Siemens and Wuxi Institute of Applied Technology of Tsinghua University, and guided by Wuxi Development and Reform Committee, Science and Technology Bureau, Science and Technology Association, and Binhu District People's Government. 　　Wuxi City ...

The memory card used by the S7-1200 CPU is an SD card, which can store user project files and has the following three functions: As a mount store for the CPU, user project files can be stored only on the card, without project files in the CPU, they cannot run without the memory card. ...

The 3RW44 has an emergency start function, but why does the soft start not start when the emergency start button is closed? Emergency start refers to the unevenness of the motor; thermal model overload; Open circuit of temperature sensor; Short circuit of the temperature sensor; The temperature sensor is overloaded; Exceeding the maximum starting time; Surpass...

1. Q: How many serial modules can the ET200S slave take? Answer: There is no constraint on the number of ET200 serial port modules, which depends on the number of modules that can be carried by the ET200S site and the constraints of IO addresses. 2. Q: What is the meaning of 4/8/32 byets in ET200S hardware configuration options?

The possible causes are as follows: 1. It is possible that the analog input module and the field sensor use self-powered or isolated power supplies respectively, and the two power supplies are not connected to each other, that is, the power supply of the analog input module and the signal ground of the field sensor are not connected; This will result in a high ...

Siemens today officially released the "Siemens China Zero Carbon Smart Park White Paper" (hereinafter referred to as the white paper), which analyzes and proposes the definition and architecture of zero carbon smart parks, the core pain points and entry points of various parks, and shares the current situation and trend of carbon peak and carbon neutrality in China and China.

Recently, the Ministry of Industry and Information Technology released the "2022 Green Production List", and five Siemens factories were successfully rated as national green factories by the Ministry of Industry and Information Technology. The five factories are Beijing Siemens Sibels Electronics Co., Ltd., Siemens Rail Transit Equipment (Tianjin) Co., Ltd.

The new factory of Siemens CNC (Nanjing) Co., Ltd. (SNC) was officially put into operation. As the world's first native digital factory of Siemens, SNC's new factory fully demonstrates the real value of Siemens' advanced digital corporate philosophy and skills. Even before it was built in the field, Siemens was using it in all directions...

Siemens Sensors & Communications Co., Ltd. (SSCL), located in Qixianling, Dalian High-tech Industrial Park, was established on October 17, 2006 and is wholly owned by Siemens (China) Co., Ltd. The plant has an area of about 40,000 square meters and a floor area of about 18,000 square meters. SSC ...

Whether pumping, ventilation, compression, movement or process machining: SINAMICS G120 is a universal drive that meets a wide range of requirements. It has clear advantages in general mechanical engineering as well as in the automotive, textile and packaging industries. Its modular design and its range from 0.55 kW to 250 k ...

(1) The soft starter display will display fault information (2) Soft starter ES software diagnostic menu (3) read data record 92, and data record 92 is diagnostic information (4) Call the function block SFC13 to read out the fault information of the soft starter, but the premise is that the fault information of the soft starter is read out in the Soft St ...

Siemens and Beijing Jingyuntong Technology Co., Ltd. ("Jingyuntong") recently signed a strategic cooperation agreement. Based on Siemens' advanced automation and digital solutions, the two sides will open up cooperation in the development and production of high-end photovoltaic equipment, and jointly promote the high-tech development of the new energy photovoltaic industry.

Siemens today released the Siemens Leadership China White Paper (hereinafter referred to as the "White Paper"), which combines the evolution of leadership theory and its performance in the business environment, comprehensively sorts out the development and upgrading of its own leadership methodology and its application in the course of more than 100 years, and deeply analyzes the development and upgrading of its leadership methodology and its application over the past century.

Siemens, as a dedicated technology company, delivered significant results in the third quarter of fiscal 2022 (ended June 30, 2022). The macroeconomic environment remains chaotic due to factors such as economic sanctions against Russia, high inflation and the coronavirus pandemic, but Siemens is still in many key malls.

The 2021 International Artificial Intelligence Conference (WAIC) was officially opened, and Roland Busch, Chairman of the Board of Directors, President and CEO of Siemens AG, was invited to attend the opening ceremony and deliver a speech. 　　Bo Leren pointed out that digital transformation is the key to all shopping malls and even social and economic ...

The trip class (Class class) defines the time frame during which a tripping must be carried out from the cold state when the current of a three-symmetrical load (e.g. a three-phase motor load) is 7.2 times the operating current Ie. Trip time: Siemens 3RW soft starter is divided into light and heavy load starting motors according to trip level ...

Siemens recently announced a partnership with Nissan to build a digital production line for its new all-electric crossover SUV Ariya at Nissan's plant in Tochigi Prefecture, Japan. The partnership has been around for a long time, and Nissan has been using the Siemens Digital Industry Software portfolio for its own planning and ...