CHINT/CHINT LW32 series universal transfer switch

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

DZ158-100 miniature circuit breaker, mainly used for AC 50Hz, rated voltage to 400V, rated current to 100A in the line to play the role of overload, short circuit protection, but also under normal conditions infrequently turn on and off electrical devices and lighting circuits, circuit breaker is suitable for industrial, commercial, commercial ...

NBH-100NGV and NBH-100HGV miniature circuit breakers are suitable for AC 50Hz, rated voltage to 230V or 400V, rated current to 100A, and play the role of overload and short circuit protection. At the same time, as a special supporting circuit breaker for photovoltaics, it can realize automatic opening of undervoltage and protect the line.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

Product Overview NXCQ series contactor emergency start device is a product specially designed and developed for fire water supply system, with the function of manual mechanical emergency start fire pump, in line with GB/T50974-2014 "Technical Specification for Fire Water Supply and Fire Hydrant System" for manual mechanical emergency starting.

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

Introduction: CHINT/CHINT AC contactor NC3-09 (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 380V (NC3-09 - 16 can be up to 660V) rated working current to 170A power system to connect and break circuits, and with the appropriate ...

Introduction: NSC1 series motion controller has 2 communication ports, 1 RS232, 1 RS485; Two or four single-phase high-speed pulse counting, up to 200KHz respectively, one or two AB phase high-speed pulse counting, up to 200KHz; External real-time clock chip is used to make the clock more accurate; ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 2 Output Type: Transistor/Drain Output voltage: 6-30VDC **Large inductive load: 80VA This article introduces the ...

NPM8 series push buttons are suitable for industrial control, instrumentation, and household appliances with AC 50Hz (60Hz), rated working voltage AC220V and below, or DC working voltage DC110V and below. It is used for the control of electrical circuits of contactors, relays and other signals, with an indication ...

NS5 series motor starter is mainly used in AC 50Hz (or 60Hz), working voltage to 690V, working current to 32A circuit, as a three-phase squirrel cage asynchronous motor overload, phase failure, short circuit protection and infrequent starting control for use, can be used as distribution line protection...

NB2LE residual current action circuit breaker is suitable for residual current protection, overload and short circuit protection in lines with AC 50/60Hz, rated voltage of 230V and rated current up to 40A. When the person is electrocuted or the leakage current of the circuit exceeds the specified value, the residual current action circuit breaker can be used in a very short ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

The TD series is suitable for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage up to 660V, and rated current up to 200A. This series of terminal blocks are connected by screw crimping, and the wire end must be crimped with the TU type or TO type end before it can be connected with the terminal block. Pick up...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

The LA19 series pushbutton is suitable for electromagnetic starters, contactors, relays and other electrical circuits with AC voltage from 50Hz or 60Hz to 380V and DC voltage to 220V for remote control. Conform to the standard: GB/T 14048.5. Rated insulation voltage: 380V Agree on free air ...