CHINT/CHINT NSC1 Series Motion Controller NSC1-D16T

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

OUVT-X3H over-under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker with the use of NBH-125 series circuit breaker, when the terminal voltage of the tripper is reduced to the under-voltage protection range or increased to the over-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, ...

NH5-125 disconnector is mainly suitable for AC 50Hz, rated voltage to 400V, rated current 125A and below in the power distribution and control circuit, mainly as the main switch in the terminal combination electrical appliances, can also be used for infrequent control of various low-power electrical appliances and lighting, widely used in industrial and mining ...

SHT-B5 shunt tripper (hereinafter referred to as tripper) is mainly used for matching with NB5 series circuit breakers, and is suitable for long-distance shunt tripping operation in lines with AC 50Hz and rated voltage to 415V; AX-B5 auxiliary contact is mainly used for AC 50Hz, rated heating current to 6A, rated ...

ND16 series signal light is suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines with an AC 50Hz (or 60Hz), rated voltage of 400V and below or DC working voltage of 400V and below. Conform to the standard: GB/T 14048.5. Root...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

LW112 universal transfer switch is mainly suitable for converting electrical control circuits and electrical measuring instruments in circuits with AC 50 or 60Hz, voltage 380V and below, and DC voltage 220V and below. It can also directly control 3-phase AC cage induction motors of 5.5kW and above. Mainly used in meters, micro-electric ...

The TD series is suitable for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage up to 660V, and rated current up to 200A. This series of terminal blocks are connected by screw crimping, and the wire end must be crimped with the TU type or TO type end before it can be connected with the terminal block. Pick up...

LW5D series universal transfer switch is mainly suitable for converting electrical control circuits (electromagnetic coils, electrical measuring instruments and servo motors, etc.) in circuits with AC 50 or 60Hz, voltage to 380V, and DC voltage to 220V, and can also directly control 5.5kW three-phase cage induction motor (starting, ...

CHINT Xinrui NM5 series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current from 16A to 1000A circuits. As the rated current of on, breaking and bearing, it can be overloaded, short-circuited and under-voltage in the line and electrical equipment.

Introduction: LW5D series universal transfer switch is mainly suitable for converting electrical control circuits (electromagnetic coils, electrical measuring instruments and servo motors, etc.) in circuits with AC 50 or 60Hz, voltage to 380V, DC voltage to 220V, and can also directly control 5.5kW three-phase cage induction motors.

The POWGRID-F series terminal box is suitable for circuits with AC 50Hz or 60Hz, rated voltage of 230V/400V AC, rated current/maximum continuous input current of no more than 125A, and the maximum power consumption capacity of the cabinet is 35W. It can be widely used in real estate - residential, commercial construction, hotels and public buildings. Technology...

NU6-III series surge protector (hereinafter referred to as surge protector) is used in AC 50Hz, rated working voltage 230V single-phase power distribution system, to meet the SPDIII. test, its open circuit voltage peak to 10kV (1.2/50μs), short circuit current to 5kA (8/20μs), suppress ...

This product is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. Conform to the standard: GB/T 16917.1 IEC 61009-1, obtained CCC certification...

During the working process, the leakage protection function is regularly diagnosed by itself (detected every 108 minutes), and the user will be reminded through the alarm module when the leakage protection function of the product is abnormal Rated current (In): 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Rated ...

NBHLE-63Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T 1691 ...

NBHLE-32 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 32A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent on-off of the line under normal circumstances. The product conforms to IEC61009-1, GB/T...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

DZ47-60 miniature circuit breaker is mainly used for overload and short-circuit protection in the line of AC 50Hz, rated voltage to 400V and rated current to 63A, and can also be used to turn on and off electrical devices and lighting circuits infrequently under normal circumstances, but it is not suitable for protecting motors. Comply with the standard ...