CHINT/CHINT DZ158-100 miniature circuit breaker

The circuit breaker is rated for insulation voltage to 800V (500V for NM1-63 type), suitable for AC 50Hz, rated working voltage to 690V (400V for NM1-63 type), rated working current from 10A to 1250A in the distribution network circuit, used to distribute electrical energy and protect the line and power supply equipment from overload...

The Ex9PL series indicator and buzzer board has a front height of 8mm, a curved surface design, and indicators of various voltage levels to meet various applications. The light-emitting module adopts LED, which has high brightness, low energy consumption and long life. The lamp head protection grade is IP65, which is suitable for harsh environments. The buzzer has a continuous ...

Introduction: The industrial touch screen NTP1 series is based on the Linux system, and the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave station, USB slave station ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CHINT/CHINT NXBLE-40 residual current action circuit breaker Rated current (In) : 6A, 10A, 16A, 20A, 25A, 32A, 40A; Rated Residual Operating Current (IOn) : 0.01A, 0.03A; . Rated operating voltage (Ue): 230V——; Rated insulated ...

NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment. Suitable...

The AX-X3H auxiliary contact complies with GB/T 14048.5 standard. It is mainly used in lines with AC rated voltage up to 415V or DC rated voltage up to 130V. Signal indication of long-distance circuit breaker when assembled with NBH-125 series circuit breaker. The auxiliary contact is an accessory product that is assembled in the open circuit ...

The NP3 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, DC working voltage up to 220V. It is suitable for remote control of equipment in the open air, rain, snow and dust, such as cranes, electric hoists and other equipment. Standard: GB/T 14048. ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NXBF-40 miniature circuit breaker is mainly used for overload and short circuit protection of power lines in household and similar places with AC 50Hz, rated voltage to 230V and rated current to 40A, and can also be used to turn on and off electrical devices and power lines infrequently under normal circumstances. Products...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 6 Output Type: Relay Maximum Inductive Load: 80V...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CHINT Xinrui NB5LE series terminal power distribution products are suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in commercial buildings, residential buildings, industrial equipment and similar places of power line facilities and electrical equipment, with overload protection, short circuit protection, residual ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

SAK series is suitable for AC 50Hz or 60Hz, rated voltage to 800V, rated cross-sectional area of 2.5-70mm2 in power and control circuits, as wire connection. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces CHINT ...

LW5D series universal transfer switch is mainly suitable for converting electrical control circuits (electromagnetic coils, electrical measuring instruments and servo motors, etc.) in circuits with AC 50 or 60Hz, voltage to 380V, and DC voltage to 220V, and can also directly control 5.5kW three-phase cage induction motor (starting, ...

The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...

NB1-63DC DC circuit breaker is used for DC rated voltage to 1000V, rated current to 63A line, for overload and short circuit protection, can also be used as infrequent operation conversion of the line. The circuit breaker is suitable for DC system applications such as communication and photovoltaic systems. Compliant with standards ...