CHINT/CHINT NM1B series plastic shell circuit breaker NM1B-160S

JCUK series is suitable for wire connection in circuits with AC 50Hz or 60Hz, rated voltage to 1000V and rated cross-sectional area to 150mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces the CHINT/CHINT Terminal Blocks - ...

CHINT/CHINT NXBLE-125 residual current action circuit breaker Rated current (In): 63A, 80A, 100A, 125A (1P+N, 2P); Rated Residual Operating Current (IOn) : AC type: 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Type A: 0.03A, ...

The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. Standards: GB/T 14048.1/IEC 60947-1, ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

DZ267-32 miniature circuit breaker (hereinafter referred to as circuit breaker) is mainly suitable for AC 50Hz, rated voltage 230V, rated current to 32A in the line for overload and short circuit protection, but also can be used as an infrequent conversion of the line under normal circumstances, especially suitable for residential lighting ...

HZ5 series combination switch is mainly used for AC 50Hz or 60Hz, voltage 380V and below electrical circuits as power switch and cage induction motor starting, commutation, variable speed switch, can also be used for control line switching. Comply with standards: GB/T 14048.3, IEC 60947-3. ...

The POWGRID-F series terminal box is suitable for circuits with AC 50Hz or 60Hz, rated voltage of 230V/400V AC, rated current/maximum continuous input current of no more than 125A, and the maximum power consumption capacity of the cabinet is 35W. It can be widely used in real estate - residential, commercial construction, hotels and public buildings. Technology...

The XF9 auxiliary contact is suitable for the line with the agreed heating current to 6A, the AC rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with NB1 or NBH8 miniature circuit breaker for the signal indication of the long-distance circuit breaker. Standards: GB/T 14048.5, IEC 6094 ...

Rated operating current at different rated operating voltages: Action characteristics: The wiring principle of the auxiliary contact is shown in Figure 1. When the auxiliary contact is opened, the 11th and 12th terminals are turned on; When the auxiliary contact is closed, the 11th and 14th terminals are turned on. Life: The operating life of the auxiliary contact is 10,000 times. This article describes ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

The AX-5 auxiliary contact is suitable for AC 50Hz, the agreed heating current to 6A, the rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with the NL1 residual current action circuit breaker for the signal indication of the long-distance circuit breaker. Conform to the standard: GB/T 14048.5, ...

Introduction: NVF3 inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, strong overload capacity, flexible operation...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NB1L-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 63A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in the pole ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

Based on the Linux system, the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave port, USB slave download port supports 10M/s transmission speed, ...

UVT-X3H under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker is used together, when the terminal voltage of the tripper is reduced to the under-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, so as to realize the under-voltage protection of the line. ...

NXMFLE residual current action circuit breaker series, suitable for AC 50/60Hz, rated working voltage to 400/415V, rated working current from 10A to 400A in the distribution network circuit, its main function is to provide indirect contact protection for personal electric shock with fatal danger, and to ...

The universal transfer switch is mainly suitable for AC 50Hz, rated working voltage 440V and below, DC voltage 240V and below electrical circuits, for manual infrequent connection or breaking of circuits. It is mainly used for the conversion of various control lines, commutation measurement control of voltmeter and ammeter, and distribution.