CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. The contactor is equipped with an inrush current suppression device, which can reduce the impact of the closing inrush current on the capacitance and suppress the overvoltage during breaking.
Comply with standards: GB/T 14048.4, IEC/EN 60947-4-1
Current rating: 130
Rated insulation voltage: 690
Weight: 3.45
Rated impulse withstand voltage: 6KV
Degree of protection: IP10
Comply with standards: GB/T 14048.4, IEC/EN 60947-4-1
This article introduces CHINT/CHINT CJ19 Series Switching Capacitor Contactor CJ19-170 product interest, also please contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
CHINT OUVT-X3H over/undervoltage tripper
OUVT-X3H over-under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker with the use of NBH-125 series circuit breaker, when the terminal voltage of the tripper is reduced to the under-voltage protection range or increased to the over-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, ...
|
|
CHINT/CHINT NXBFLE-63 residual current action circuit breaker
NXBFLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on and off under normal circumstances.
The product conforms to IEC61009-1, GB/T...
|
|
CHINT/CHINT OUVT-1 over/undervoltage tripper
OUVT-1 over- and under-voltage trippers are mainly used for over- and under-voltage protection with NB1 and NB1L series circuit breakers in lines with AC 50Hz rated working voltage of 230V.
Basic parameters
Rated operating voltage Ue: 230V AC
Key performance indicators
1. Action characteristics: overvoltage action setting ...
|
|
CHINT/CHINT soft starter NJR2-ZX series burst start time 0.1s
Introduction: NJR2-ZX series online soft starter is based on advanced dual CPU control technology as the core, controls the thyristor module, realizes the soft start and soft stop functions of the (squirrel cage) three-phase AC asynchronous motor, and has the functions of overload, input phase loss, output phase loss, load short circuit, start...
|
|
CHINT/CHINT Miniature Circuit Breaker NXB-125G Quota voltage 230V
Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection
Product parameters
...
|
|
CHINT/CHINT Authorized Package Product — POWGRID-FD
Product Overview
It is suitable for terminal circuits with AC 50HZ and load current not exceeding 100A, and the normal operating temperature is -25°C to +60°C.
Technical Parameter Item: Parameter value
Compliant with standard: GB/T 17466.1 GB/T 17466.24
Installation: Concealed/surface-mounted
Number of digits: ...
|
|
CHINT/CHINT NM1 Series Plastic Case Circuit Breaker (New Platform) NM1-63S
The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...
|
|
CHINT/CHINT HZ12 Series Combination Switch (Power Cut-off Switch) HZ12-40
HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on.
Comply with standards: GB/T 14048.3, IEC 60947-3.
Ith A:40
Ui A:550
Ue V:380
Ie/A(AC-23A): 40
...
|
|
CHINT/CHINT Terminal Appliance SHT-X3 Shunt Tripper
Rated insulation voltage (Ui): 500V;
Rated operating current at different rated operating voltages (see Table 1)
Usage Category: AC-12, DC-12.
Action characteristics: At 70%-10% of the rated control power supply voltage, the tripper should act reliably to disconnect the circuit breaker. Tripper ...
|
|
CHINT/CHINT DZ20 Series Plastic Case Circuit Breaker DZ20Y-100
DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...
|
|
CHINT/CHINT NXMS series electronic molded case circuit breaker
Molded case circuit breaker, in the distribution line and equipment overload, short circuit, to provide protection for the line and equipment, but also to the infrequent start of the motor to provide overload, short circuit protection.
● Shell Frame Grade NXMS Series Electronic Circuit Breaker: 160A, 250A, 400A, 630A, 100...
|
|
CHINT/CHINT NXC series AC contactors
The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays.
Standards: GB/T 14048.1/IEC 60947-1, ...
|
|
CHINT/CHINT NCH8G Household AC Contactor NCH8G-20/22
NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...
|
|
CHINT NBH-100□GQ self-healing over/undervoltage protection circuit breaker
NBH-100□GQ series miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V or 400V, rated current to 100A line to play overload and short circuit protection. At the same time, as an over- and under-voltage protection circuit breaker, it can realize the automatic disconnection protection of over- and under-voltage, and automatically ...
|
|
CHINT/CHINT NB8LE-63 residual current action circuit breaker
NB8LE-63 residual current action circuit breaker is mainly suitable for AC 50Hz, rated voltage to 400V, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection and leakage protection for the line, but also in normal conditions ...
|
|
CHINT/CHINT Single Magnetic Circuit Breaker NB8-63M
Introduction: CHINT/CHINT Miniature Circuit Breaker NXB-40 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection
Product parameters
Forehead...
|
|
CHINT/CHINT CJ40 Series AC Contactor CJ40-500
CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.
|
|
CHINT/CHINT NVF3M series mini inverter relay 1 output
Introduction: NVF3M series mini inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, overload capacity...
|
|
CHINT/CHINT Terminal Block-JXB Series
JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails.
Comply with standards: GB/T 14048.7, IEC 60947-7-1.
This article describes ...
|
|
CHINT/CHINT NXBLE-125G residual current action circuit breaker
CHINT/CHINT NXBLE-125G residual current action circuit breaker
Rated current(In) : 63A, 80A, 100A, 125A (1P+N.2P) ;
Rated Residual Operating Current (IOn): 0.03A, 0.05A, 0.075A, 0.1A, 0.3A;
Rated Operating Voltage (Ue) ...
|
|