Introduction: Soft-Touch/Rorobot Soft-Touch Module Slip Mounting Plate SMP-14
Features:
According to the length of the slot, it is divided into SMP-13 / SMP-14 / SMP-15 / SMP-16
It can be used for the assembly between the soft beak module [BM], the connection combination [CM] and the aluminum profile [P].
The mounting angle and position of the soft beak module [BM] can be adjusted freely
Accessory package PK-SMP01 included
Product parameters
Groove length: 48mm
Slot spacing: 10mm
Groove width: 4.2mm
Length: 80mm
Width: 20mm
Plate thickness: 6mm
Tare weight: 16.2g
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the soft touch/Rorobot soft touch module sliding mounting plate SMP-14 product, if you are interested in the soft touch/Rorobot module, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Rorobot BML-3G20[HAS]/S
Introduction: Rorobot BML-3G20[HAS]/S
Features:
The fingertips are open in the positive pressure state and clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.
The soft claw material is divided into conventional [ ...
|
|
Soft Touch/Rorobot Finger Module B4V4 Module length 72mm
Introduction: Rorobot Finger Module B4V4, Features and Applicable Scenarios: Large Clamping Force, Can Be Used in Series (Using Screw Accessory Kit PK) and Simplifies Tracheal Arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm.
Features:
...
|
|
The FCM-R02 flange connection module weighs 147g
Introduction: Rorobot flange connection module FCM-R02 conforms to ISO 9409-1:2004 standard (i.e. GB/T 14468.1-2006/), suitable for most robot flanges on the market.
Features:
Light weight, suitable for lightweight multi-joint robots, ...
|
|
Rorobot BMC-20201[H]/S The recommended load is 10g
Introduction: Rorobot BMC-20201[H]/S
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G
The soft claw material is divided into conventional type and non-marking type, ...
|
|
Soft Touch/Rorobot Finger F-C4 Negative Pressure Stroke 9mm
Introduction: Soft Touch/Rorobot Finger F-C4
Features:
The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS].
The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades.
Defend...
|
|
Soft Touch/Rorobot Finger Module C8V3 Finger height 14mm
Introduction: Rorobot Finger Module C8V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...
|
|
SoftTouch/Rorobot Finger Module A8V4 Module length 148mm
Introduction: Soft Touch/Rorobot Finger Module A8V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm.
Product Features ...
|
|
Rorobot BMC-4H18[HAS]/S
Introduction: Rorobot BMC-4H18[HAS]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and no ...
|
|
Rorobot B-4B30[H]/S
Introduction: Rorobot B-4B30[H]/S
Features:
The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D.
Soft-touch materials are divided into ...
|
|
Rorobot BMC-20006[P] 30g load is recommended
Introduction: Rorobot BMC-20006
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.
The soft jaw material is divided into conventional type, when the weight of the workpiece ...
|
|
Rorobot FM-C4V5/LS1[H] Negative pressure stroke: 3mm
Introduction:Rorobot FM-C4V5/LS1[H]
Product parameters
Positive pressure stroke: 11mm
Negative pressure stroke: 3mm
Safe working air pressure: 300kPa
Recommended load: 70g
Self-weight: 20g
Our customer-centric approach ...
|
|
Soft Touch/Rorobot Finger F-C7 Negative pressure stroke 29mm
Introduction: Soft Touch/Rorobot Finger F-C7
Features:
The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS].
The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades.
Defend...
|
|
SoftTouch/Rorobot Module B-3B12[H]/S
Introduction: Rorobot module B-3B12[H]/S is a small, slender soft claw, can support 6mm-12.3mm workpiece inside, in a small space, to achieve ring-shaped, cylindrical, hollow cylindrical and other small, limited external grasping space, fragile and fragile objects ...
|
|
Rorobot B-2B accuracy range 0.05mm
Introduction: Rorobot Soft Beak B-2B
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Product parameters
...
|
|
Rorobot FM-A6V3/LS1[P]
Introduction: Rorobot Robot Soft Jaw FM-A6V3/LS1, Soft Finger LS1 has good versatility and wear-resistant. It is suitable for rough workpiece surfaces such as food, metal, and plastic parts. When gripping the workpiece, the damage caused to the workpiece by the soft finger itself can be minimized. We...
|
|
Rorobot BMC-3A18[HAS]/S The recommended load is 30g
Introduction: Rorobot soft jaw BMC-3A18 [HAS]/S, soft jaw material is divided into conventional type [H] and non-marking type [HAS]
Features:
The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the fingertip distance of the clamping fingertip G and the external support fingertip distance is D...
|
|
Rorobot FM-A5V5/LS1[PAS] weight 90g
Introduction: Rorobot FM-A5V5/LS1
Product parameters
Positive pressure stroke: 24.5mm
Negative pressure stroke: 19mm
Safe working air pressure: 120kPa
Recommended load: 280g
Tare weight: 90g
Our customer-centric service ...
|
|
Soft Touch/Rorobot Soft Beak/Finger Module BM Weight 16.50kg
Introduction: Rorobot soft beak module BM series can be installed in the connection module [CM] or flange connection module [FCM]; The soft beak module comprises a soft beak and a matching fitting joint; The module assembly is supplied with a straight-through fitting fitting (PN-066) or a side-through fitting fitting (PN-007); Soft beak ...
|
|
Soft Touch/Rorobot Finger Module FMA5-V3 Finger length 69mm
Introduction: Soft Touch/Rorobot Finger Module FMA5-V3 Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...
|
|
Rorobot BMC-2G1211[H] Recommended load is 120g
Introduction:Rorobot Robot BMC-2G1211[H]
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G
The soft claw material is divided into conventional type [H] and ...
|
|