Soft Touch/Rorobot Finger F-C4 Negative Pressure Stroke 9mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Finger F-C4

Product Introduction
Soft-Touch/Rorobot Finger F-C4 Reinforced Material [H] has a higher operating pressure range and a gripping force of up to 300% of conventional fingers

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Soft Touch/Rorobot Finger F-C4

Soft Touch/Rorobot Finger F-C4 Negative Pressure Stroke 9mm

Features:

The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS].

The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades.

Anti-static material [AS], non-sticking, suitable for the electronics industry and clean workshops.

Product parameters

Fingertip stroke: 20mm

Negative pressure stroke: 9mm

Positive pressure stroke: 11mm

Height: 14mm

Length: 41mm

Finger width: 12mm

Tare weight: 5g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft touch/Rorobot finger F-C4 product, if you are interested in soft touch/Rorobot finger, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

More on that

	柔触/Rorobot 柔爪BML-3A18[HAS]/S 建议负载30g 简介：柔触/Rorobot 柔爪BML-3A18[HAS]/S 　　产品特点　　正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G以及外撑指尖距D可使用工作气压调节。　　柔爪材质分 ...
	柔触/Rorobot 柔爪BML-3B14[PAS]/S 简介：柔触/Rorobot 柔爪BML-3B14/S 　　产品特点　　正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，内撑指尖距D可使用工作气压调节。　　柔爪材质分为常规型和无痕型，当 ...
	柔触/Rorobot 柔爪FM-A5V5/LS1[PAS] 自重90g 简介：柔触/Rorobot 柔爪FM-A5V5/LS1 　　产品参数　　正压行程：24.5mm 　　负压行程：19mm 　　安全工作气压：120kPa 　　建议负载：280g 　　自重：90g 　　我们以客户为中心的服务 ...
	柔触/Rorobot 柔爪BML-4G64[HAS]/S 建议负载2000g 简介：柔触/Rorobot 柔爪BML-4G64[HAS]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无 ...
	柔触/Rorobot 手指模块FM-C3V2 负压行程5mm 简介：柔触/Rorobot 手指模块FM-C3V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 手指F-B5 负压行程16mm 简介：柔触/Rorobot 手指F-B5 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 手指模块FM-B3V1 自重77g 简介：柔触/Rorobot 手指模块FM-B3V1特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指模 ...
	柔触/Rorobot 手指模块FM-A8V1 手指宽度24mm 简介：柔触/Rorobot 手指模块FM-A8V1，特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指 ...
	柔触/Rorobot 滑移安装板SMP-4L 槽宽4.2mm 简介：柔触/Rorobot 滑移安装板SMP-4L 　　产品特点　　按形状和槽长度分为不同款式　　可用于手指模块[FM]与法兰连接模块[FCM]间的装配　　手指模块[FM]的安装角度和位置可自由调节　 ...
	柔触/Rorobot 柔爪BMC-4G64[HAS]/S 简介：柔触/Rorobot 柔爪BMC-4G64[HAS]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无 ...
	柔触/Rorobot 柔爪BMC-20006[P] 建议负载30g 简介：柔触/Rorobot 柔爪BMC-20006 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节。　　柔爪材质分为常规型，当工件重量 ...
	柔触/Rorobot 手指模块C5V5 手指长度35mm 简介：柔触/Rorobot 手指模块C5V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 柔爪BMC-1G364030[HAS]/M 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-1G364030[HAS]/M，是一款加强版单指式柔爪，推荐指尖与工件距离(19-28)mm，单指柔爪建议负载（0-500）G，外抓夹持力（0-11）N。　　产品特点　　正压状态指尖 ...
	柔触/Rorobot 手指F-A6 自重55g 简介：柔触/Rorobot 手指F-A6 　　产品特色　　指底花纹及指尖形状:会影响对工件的包覆效果以及摩擦力。　　如需定制仿形指底花纹或指尖形状，请联系客服人员。　　手指材质可选择常规型 ...
	Rorobot B-3C12[H]/S recommended load is 15g Introduction: Rorobot B-3C12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into regular type [H] and non-marking type ...
	柔触/Rorobot 机器人柔爪BMC-1G071010[LPAS]/S 简介：柔触/Rorobot 机器人柔爪BMC-1G071010[LPAS]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，指尖与工件距离G可使用工作气压调节。　　柔爪材质分 ...
	柔触/Rorobot 手指模块B4V3 手指宽度18mm 简介：柔触/Rorobot 手指模块B4V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
	Soft Touch/Rorobot Finger Module A6V4 Finger length 83mm Introduction: Soft Touch/Rorobot Finger Module A6V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	柔触/Rorobot 柔爪BML-20006[PAS] 简介：柔触/Rorobot 柔爪BML-20006 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节　　柔爪材质分为常规型和无痕型，当工 ...
	柔触/Rorobot 柔爪BML-2G1624[HB]/S 建议负载200g 简介：柔触/Rorobot 柔爪BML-2G1624[HB]/S 　　产品特点　　真空状态夹紧，正压状态指尖打开，可由真空直接驱动　　配合柔触空气驱动器使用(正负压切换驱动)可提升夹持工件尺寸　　柔爪 ...