Soft Touch/Rorobot Finger F-C7 Negative pressure stroke 29mm

Introduction: Soft Touch / Rorobot Soft Beak B-2B 　　Product features: Replaceable flexible chucks The fingertip is open in the positive pressure state, clamped in the negative pressure state, and the fingertip distance is adjustable G It can be used as a clamp or external support Recommended for use with soft touch drivers Specifications ...

Introduction: Soft Touch/Rorobot Connection Module CM-S04 Product features: The end can be fitted with a full range of soft beak modules It can be mounted on the Soft Series Slide Mounting Plate [SMP] page.50 The elastic cushioning structure design is especially suitable for multi-layer elastic soft fabric products.

Introduction: Rorobot BML-3A18[HAS]/S Product features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted using the clamping fingertip distance G and the external support fingertip distance D. The material of the soft claw is ...

Introduction: Soft Touch/Rorobot Finger Module A7V5, Features and Applicable Scenarios: The module is thinner and lighter, and the installation module finger spacing is only 10mm, which is suitable for clamping small and thin workpieces. It can also be used in series (using screw fitting package PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Soft Touch/Rorobot Gripper BOM Specifications Slip Steer Mounting Plate: SMP-02 Profile: P-20300 Connector: CP-04 Flange Connection Module: FCM-R06 Our customer-centric service concept: a full range of services to pursue ...

Introduction: Rorobot B-4B30[H]/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch materials are divided into ...

Introduction: The iPCU 2 is available in two options: the standard iPCU 2-SMN and the high-speed iPCU 2-HMN, and a compact soft-touch gripper controller. Small size, light weight, easy installation. The high-speed type has a larger flow rate and faster response speed, making it suitable for high-speed handling conditions. ...

Introduction: Soft Touch/Rorobot Finger Module C6V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle are adjustable Product features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...

Introduction: Soft Touch/Rorobot Finger Module C5V5, Features and Applicable Scenarios: The module is thinner and lighter, and the installation module finger spacing is only 10mm, which is suitable for clamping small and thin workpieces. It can also be used in series (using screw fitting package PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Soft Touch/Rorobot Finger F-B4 Product features: Finger materials can be selected as regular type, enhanced type [H], and anti-static type [AS]. The reinforced material [H] has a higher working pressure range, and the clamping force** is up to 300% higher than that of conventional material fingers. Defend...

Introduction: Soft Touch/Rorobot Finger Module FM-A3V2, Features and Applicable Scenarios: Independent installation, can be installed with SMP slip mounting plate, finger spacing and angle are adjustable, fixing method: can be fixed from four directions (optional), Air intake method: Air intake joint can be installed from three directions (optional). ...

Introduction: Rorobot BML-3C12[HAS]/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted with the fingertip distance D. Soft touch materials are divided into conventional [H] and non-...

Introduction: Rorobot Robot Robot Grip BML-1G071010[LP]/S Product features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with the soft touch air driver, and the working air pressure can be adjusted using the distance between the fingertip and the workpiece G. The soft claw material is divided into ...

Introduction: Rorobot Robot Flexible Claw BMC-20005V, B-20005V/S can be used well for small, light and thin special-shaped workpieces between 0.18mm and 3mm, even if it is close to the plane, it can be pinched and grasped, to ensure that the product surface is not flawed. For light and small, high blanking accuracy requirements and ...

Introduction: Rorobot BMC-2G1624[HB]/S Product features: Clamping in vacuum state, fingertip opening in positive pressure state, can be directly driven by vacuum When used with a soft touch air drive (positive and negative pressure switching drive), the size of the clamped workpiece can be increased Soft claw ...

Introduction: Rorobot BML-3G20[HAS]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G. Soft-touch materials are divided into regular [H] and non-...

Introduction: Rorobot BML-4H18[H]/S Product features: The fingertips are open in the positive pressure state and clamped in the negative pressure state, it is recommended to use them with the soft touch air driver, and the working air pressure can be adjusted using the fingertip distance D of the external support. The soft claw material is divided into conventional type [H and non-marking]

Introduction: Soft Touch/Rorobot Flange Connection Module FCM-R02 Product features: It complies with the ISO9409-1:2004 standard (i.e., the national standard GB/T 14468.1-2006/), and is suitable for most robot flanges on the market. Lightweight for lightweight multi-joint machines

Introduction: Rorobot BMC-3B24[H]/S Product features: The fingertips are open in the positive pressure state, clamped in the vacuum state, it is recommended to use with the soft touch air driver, and the working air pressure can be adjusted using the fingertip distance G and the external support finger spacing D. Soft touch material ...

Introduction: Rorobot Robot Flexible Claw BMC-3G20[H]/S, B-3G20[H]/S is a strong small soft claw that can grasp relatively heavy workpieces externally. Clamping force (0-0.6N) and clamping range (3-13mm), recommended load at 60g. It makes up for the other three-fingered soft claws in grasping ** high negative ...