Mini Slim BGS Reflective M8 Connector Type 15mm PR-MB15CP
specification
| Model | PR-MB15CP | | type | BGS reflection | | output | PNP | | shape | Compact and slender | | Connection patterns | M8 connector: 4-pin | | Detection distance | 1 to 15 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø3mm (at 15mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | 1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 13 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-MB15CP products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250(10M)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m
*1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2000
Sensor controller host
specification
*1 Displayed on the IX touch panel or PC software.
*2 Can be set according to the program.
*3 Diameter tool only, up to 8 pieces.
*4 Select one of ±5 V, 1 to 5 V, 0 to 5 V, 4 to 20 mA.
*5 Set ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-88030
Connector kit for sensor and controller connection for PUR cables
Type: Cable: PUR (Polyurethane) use
Target products: OP-87636/87637, OP-87640/87641
Weight: approx. 3 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser sensor ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable 2m CB-A2
KEYENCE Sensor Head-Controller Cable 2m CB-A2
Length: 2 m
Weight: approx. 200 g
This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable 2m CB-A2 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customers.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N Laser Sensor Amplifier Split Amplifier Cable Type Main Unit NPN
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10
Length: 10 m
Weight: approx. 550 g
This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10 products, if you are interested in KEYENCE/KEYENCE products, please also contact me ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C
*1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Output 2 and external input are switched ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor CZ-V20 Series The input time is 20ms
Introduction: KEYENCE/KEYENCERGB Digital Fiber Optic Sensor CZ-V20 series two new sensor heads once again broaden the application range of ultra-small RGB sensors; The setup is simple, and the setup can be completed with just one button press; Three detection modes are available for a wide range of targets.
...
|
|
KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3PL
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3P L Flat BGS Reflective M8 Connector Type 15mm
specification
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has a shading ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H008
Sensor head Spot Type LK-H008
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H008 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Sensor Head Wide Type Laser Class 2 LK-H087
Sensor head wide type laser class 2 LK-H087
specification
This article introduces the KEYENCE/KEYENCE sensor head wide laser grade 2 LK-H087 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope ...
|
|
KEYENCE/KEYENCE Proximity Sensor EZ Series consumes 13 mA
Introduction: The KEYENCE/KEYENCE stand-alone proximity sensor EZ series is a short, space-saving, highly sensitive and long-range proximity sensor. Output indicator for easy observation.
Product parameters
This article introduces Keane's ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30N1
Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N1
specification
This article introduces the KEYENCE/KEYENCE subminiature amplifier built-in photoelectric sensor PR-M/F Series PR-MB30N1 products, if you are interested in KEYENCE/KEYENCE products, please contact me ...
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP
Square Reflective M8 connector type 250mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P Laser Sensor Amplifier Split Amplifier Cable Type Main Unit PNP
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
KEYENCE/KEYENCE sensor LJ-G015
Enclosure rating: IP67 (IEC60529)
Ambient light: Incandescent/fluorescent: 5,000 lux*5 max
Ambient temperature: 0 to +50 °C
Relative humidity: 35 to 85 % RH (non-condensing)
Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series
Reflective laser sensors with detection distances of up to 5 meters and installation restrictions. The distance detection principle is not affected by the surface of the object, and can detect a variety of workpieces.
Excellent detection capabilities
The LR-T series offers a variety of innovative features to detect targets previously thought undetectable. ...
|
|
KEYENCE/KEYENCE Guided Pulse Level Sensor FL Series IP67 Protection
Introduction: KEYENCE/KEYENCE Guided Pulse Liquid Level Sensor FL series adopts the newly developed "Sensing Guided Pulse Method", which is not affected by the flow obstruction parts in the environment, and can automatically adjust to the adhesion to achieve stable sensing. After installation, it only takes three steps ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N3
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N3
specification
This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-MB15N3 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497
Connector cable M8L word 2m PVC
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
|
|
Contact
working hours
