Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N1
specification
| Model | PR-MB30N1 | | type | BGS reflection | | output | NPN | | shape | Compact and slender | | Connection patterns | 1m cable | | Detection distance | 1 to 30 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø5.5mm (at 30mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 21 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-MB30N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB240CB
Threaded reflective type M12 connector type 240mm
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. In addition, when "-99" is exceeded, the display will change to "-FF".
*2 The FDA's (CDRH) laser classification is based on IEC6 ...
|
|
KEYENCE/KEYENCE Vibration Sensor GA Series - GA-223
KEYENCE/KEYENCE Vibration Sensor GA Series - GA-223
Targets of different materials can be stably detected
Built-in monitor output
Delay the timer to turn on
This article introduces the KEYENCE/KEYENCE Vibration Sensor GA Series-GA-223 products.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250(10M)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 10m
*1 According to Laser Notice No. 56 of the FDA (CDRH), the classification is carried out according to the IEC60825-1 standard.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CP
KEYENCE/KEYENCE Subminiature Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective M8 Connector Type 15mm PR-FB15CP
specification
In this article, we introduce the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-FB15CP ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-B01
Squared Standard mounting metal parts
Type: Flat standard mounting bracket
Number of Builts: 1pcs
Material: SUS316L
Note: Comes with M3 screw×2
Weight: approx. 8 g
In this article, we introduce the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series O...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027K
Sensor head wide type LK-H027K
specification
This article introduces KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series OP-87406
Fixing screws 45mm
Summary: Screws to fix the adjustable bracket for the LR-Z series.
Target products: LR-Z series
Length: 45 mm
Material: Bolt: Nickel Plated Copper, Nut/Washer: Nickel Plated Iron
Weight: approx. 70 g
This article introduces the KEYENCE/KEYENCE subminiature ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51C3PL
KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51C3PL Flat Permeable Type M8 Connector Type 0.6m
*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, ending with "L" ...
|
|
KEYENCE/KEYENCE Optoelectronic Sensors with Built-in Ultra-Small Amplifiers PR-M/F Series OP-87672
Slit plate φ0.5 mini for ultra-thin
Type: Slender Small, slender and elongated
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight: approx. 1 g
This article introduces ...
|
|
KEYENCE/KEYENCE CCD laser displacement sensor LK-G3000 series all-in-one type
Introduction: There are 6 sensor heads to choose from, which can be used with new algorithms and 2 types of optical systems.
peculiarity
Sampling speed: 50kHz
High accuracy: ±0.02% (LK-G10/15)
Ultra-high repeatability: 0.01 μm
Multi-function controller
...
|
|
KEYENCE/KEYENCE Sensor Head Wide Type Laser Class 2 LK-H087
Sensor head wide type laser class 2 LK-H087
specification
This article introduces the KEYENCE/KEYENCE sensor head wide laser grade 2 LK-H087 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor FS-N40 Series NPN Output
Description: The KEYENCE/KEYENCE Fiber Optic Sensor FS-N40 series features the latest high-brightness LEDs and a highly efficient circuit design to dramatically increase light intensity. In the case of testing workpieces with poor environmental hygiene conditions or low reflectivity, etc., it can ensure long-term ...
|
|
KEYENCE/KEYENCE Photoelectric Sensors PX Series Shock resistant 10 to 55Hz
Introduction: KEYENCE's new PX series of ultra-strong industrial photoelectric sensors, rugged industrial sensors, are designed for use in demanding environments. The entire body of the PX Series enclosure is filled with transparent epoxy resin under vacuum. This ensures that the cables and lenses are firmly adhered to the body, ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG (Detection Distance: 100mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X100CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type
This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-X100CG (detection distance 100mm) products.
|
|
KEYENCE/KEYENCE amplifier built-in TOF laser sensor LR-T series MU-CB8
Power cable for MU-N series
End Shape: Cable Termination: 8-core loose wire, Controller: Connector
Length: 2 m
Material: PVC (Vinyl Chloride)
Remarks: For the main unit
Weight: approx. 150 g
This article introduces the KEYENCE/KEYENCE amplifier built-in TOF laser ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series Tail Unit (2 pcs) OP-26751
KEYENCE Laser Sensor LR-X Series Tail Unit (2 units) OP-26751
Type: Tail unit
Summary: When adding a sensor amplifier main unit and an expansion unit, clamp the amplifier to fix the tail unit.
Applicable products: FS-N10 series and other add-on ...
|
|
KEYENCE/KEYENCE laser sensor LR-TB2000C/5000C 660nm
Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series OP-87669
Gaskets are squared
Number of built-in units: 2 sets
Material: SUS303
Weight: about 1 g
This article introduces the KEYENCE/KEYENCE OP-M/F Series PR-M/F Series Photoelectric Sensor, if you are interested in KEYENCE/KEYENCE products, please contact us ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-TB2000/5000 Reflectivity
Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series
The new Ultra-Small pursues "Ultra-Small × Stable Detection". It can be installed in a variety of places
Green Laser × Mirror structure × Customized CMOS Sensors A new triangulation ranging system that achieves ultra-miniaturization
It can stably detect a wide range of targets, from highly reflective metals to black workpieces
...
|
|
Contact
working hours
