KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2000

Sensor controller host

KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2000

specification

Main Units / Expansion Units			host
display	The smallest display unit	Z-axis	10 µm *1
		X-axis	50 µm *1
	Display range	Z-axis	± 999.99 to ±999 mm (4 segments optional)*1
		X-axis	± 999.95 to ±999 mm (4 segments optional)*1
tool	Scan mode		HEIGHT, HEIGHT DIFFERENCE, AREA HEIGHT, PIN HEIGHT, MAX/MIN, HEIGHT AREA, BLACK & WHITE AREA, WIDTH, HEIGHT DIFFERENCE CALCULATION, THICKNESS CALCULATION, POSITION CORRECTION, 1-AXIS EDGE CORRECTION, 2-AXIS EDGE CORRECTION
			Judgment tool: 16 tools, position correction tool: 1 tool*2
	Straight line mode		Height (AVE/MAX/MIN), Height Difference (AVE/MAX/MIN), Edge Position, Width/Diameter, Height Difference/Width Calculation, Thickness Calculation, Position Correction, Tilt Correction
			Judgment tool: 16 tools3, Position correction tool: 1 tool, Tilt correction: 1 tool2
Other features	general		ZERO/ offset, on-the-fly threshold change, 2-point calibration, measurement direction, measurement with position correction NG, ZERO/ offset memory, shooting mode (HDR), additional sensor date time
			Information, N.O./N.C. switching, I/O monitor, automatic brightness adjustment, illumination (ON/OFF), comprehensive judgment conditions, NPN/PNP switching, simultaneous host/slave input, mutual interference prevention, password
	Scan mode		Measurement Distance, Measurement Position (Small / Standard / Large), Measurement Mode, Measurement Interference Removal, Shooting Mode (High Gain),
			Tilt Correction (Optional Fixed, Real-Time Correction), Halo Reduction, Trigger Input (Internal/External), Trigger Interval, Trigger Delay, Trigger Error,
			Black and white histogram function, area height histogram function, datum area fixation, outline invalidation, rotation range, height image display in tool setting screen, zoom function
	Straight line mode		Average times, laser position adjustment, TIMING input, sensor head tilt correction (fixed only), measurement ambient light cancellation, HOLD function, alarm setting,
			Measurement method (average/maximum/minimum), laser sensitivity adjustment, average filter, median filter, X-axis median filter
input	input		Passive contact input / voltage input can be switched
			Passive contact input: ON voltage 2 V or less, OFF current 0.1 mA or less, ON current 2 mA (in case of short circuit)
			Voltage input: Maximum rated input voltage 26.4 V, ON voltage 18 V or more, OFF current 0.2 mA or less, ON current 2 mA (at 24 V)
	Points		8 points (IN1 to IN8)
	function		IN1: External trigger↑↓ /TIMING, IN2 to IN8: can be assigned to any function
			Assignable Functions: Program Switch, Stop Illumination, ZERO/ Offset (Batch), Reset (Error Only), Reset (Judgment Value Only), Reset (Judgment Value & Error)
output	output		The open collector output is NPN/PNP switchable and N.O./N.C. switchable
			NPN open-collector output: 26.4 V max. 50 mA (20 mA when using the handset), residual voltage 1.5 V or less
			PNP open-collector output: 26.4 V max. 50 mA (20 mA when using the handset), residual voltage 2 V or less
	Points		10 points (OUT1 to OUT10)
	function		It can be assigned to any function
			Assignable functions: Comprehensive judgment result (all OK/any OK/NG), Run, BUSY, error, position correction result, tilt correction result, logical operation result of each tool,
			Black & White Area / Height Area Tool Results (OK/NG), Height / Height Difference /MAXMIN/ Calculation Tool Results (OK/NG/HIGH/LO), Alarm
Analog voltage output			± 5 V, 1 to 5 V, 0 to 5 V output impedance 100 Ω*4
Analog current output			4 to 20 mA maximum load resistance 350 Ω*4
Number of programs			32 programs
Statistics			Scan Mode: Measured Value / Concordance (MAX, MIN, AVE), Processing Time (Latest Value, MAX, MIN, AVE), Count (OK / NG / Triggers)
			Straight-line mode: Measured value / Consistency (MAX, MIN, AVE), Count (OK number / NG number / number of judgments) 1 5
Detection records	Save the quantity	Scan mode	50 sheets (FTP client feature: active/high-resolution mode: active)
			80 sheets (FTP client feature: Active/High Resolution mode: Invalid)
			70 sheets (FTP client feature: invalid/high resolution mode: active)
			100 sheets (FTP client feature: invalid/high resolution mode: invalid)
			*6
		Straight line mode	400 sheets (FTP client features: Active/Hi-Res mode: -)
			500 sheets (FTP client feature: invalid/high-resolution mode: -)
			*6
	Save the condition		NG only/ All selectable *6
Image Data Transfer (FTP Client Function)	Transmission destination		FTP server
	Transfer format		BMP/JPEG/TXT is optional
	Transmission conditions		4 conditions
			All / Comprehensive judgment result (OK/NG) / Results of each tool (OK/(NG and ALM)) / Logical results of each tool (OK/NG) You can choose from
Ethernet	specification		100BASE-TX/10BASE-T *7
	connector		RJ-45 8 pin connector *7
Interfaces are supported			CC-Link, DeviceNetTM, EtherNet/IPTM, EtherCAT®, RS-232C, BCD output, TCP/IP protocol-less communication *8
Number of units that can be connected			1 host, 1 handset, and 1 communication unit (DL).
rated	Supply voltage		24 VDC ±10% (including ripple)
	Current consumption		Maximum 1.9 A or less (0.8 A or less when using the main unit only, 1.9 A or less when adding a handset) (excluding output load)*9
Environmental resistance	Ambient temperature		0 to +50°C (no freezing)
	relative humidity		35 to 85% RH (non-condensing)
Material			Main Chassis Housing: PC/ Power Connectors: PA, POM/ Analog Output Connectors: PA, POM/I/O Connectors: PA/
			Sensor Head Connector: Zinc +Ni Plating, PA/Ethernet Connector: Copper Alloy +Ni Plating / Rear Heat Sink of the Main Unit: Aluminum /
			DIN rail fastener on the back of the main unit: POM/ nameplate :P C
weight			Approx. 210 g

*1 Displayed on the IX touch panel or PC software.

*2 Can be set according to the program.

*3 Diameter tool only, up to 8 pieces.

*4 Select one of ±5 V, 1 to 5 V, 0 to 5 V, 4 to 20 mA.

*5 When sample hold (edge), peak/valley, and P-P hold (horizontal/edge) are set.

*6 Saved in the internal memory of the sensor controller. The detection history, which is stored inside the sensor controller, can be backed up to a PC via a USB memory installed on the IX touch panel or PC software.

*7 Used to connect to IX touch panel or PC software. To connect the handset, you need to go through the RJ45 connector of the main unit.

*8 When using the DL series. For other interfaces, please contact KEYENCE.

*9 Includes DL series communication units.

This article introduces KEYENCE/KEYENCE multi-point laser sensor IX-H2000 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

KEYENCE/KEYENCE Multi-Point Laser Sensor IX-H2000

Sections viewed

Contact

working hours