KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3PL

KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3P L Flat BGS Reflective M8 Connector Type 15mm

KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3PL

specification

Model		PR-FB15C3PL*1
type		BGS reflection
output		PNP
shape		bracket
Connection patterns		M8 connector 3-pin
Detection distance		1 to 15 mm
Control the number of outputs		1
Output actions	Output 1	―
	Output 2	ON when light is in
Response time	Output 1	―
	Output 2	ON → OFF：2.7 ms、OFF → ON：0. 5ms
Sensitivity adjustment		N/A
Spot diameter		Approx. 2.5 x 4.5 mm (at 15 mm)
light source		4 elements, point light, red LED (650 nm)
Prevent mutual interference function		4 units
Displays an indicator		Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green)
Control the output		30 VDC or less, 50 mA or less
		Leakage current:
		0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ
		Residual Voltage:
		1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA
Protection circuits		Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection
rated	Supply voltage	10 to 30 VDC, including pulsation (P-P) 10 %
	Current consumption	19 mA
Environmental resistance	Enclosure protection grade	IP67 (IEC60529)、4X、6P、13 (NEMA250)
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient lighting	Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less
	Ambient temperature	-25 to +55 °C (no freezing)
	Store at ambient temperature	-25 to +75 °C
	relative humidity	35 to 85 % RH (non-condensing)
	Withstand voltage	1,000 VAC、50/60 Hz、1 min
	Earthquake resistance	10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions
	Impact resistance	6 times each in the 1,000 m/s2, X, Y, Z directions
Material		Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin
fittings		Operator's manual
weight		About 10 g

*1 The number of control outputs for the M8 connector (3pin) type is one. If the model number ends with "D", it has an ON output when shading, and an ON output when it enters the light if it ends with "L".

Example) PR-M51C3PL has an ON output (output 2) when light is entered. (The response time is also the response time of output 2)

This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F series PR-FB15C3PL products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

KEYENCE/KEYENCE Built-in Photoelectric Sensor PR-M/F Series PR-FB15C3PL

Sections viewed

Contact

working hours