KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP

Square Reflective M8 connector type 250mm

KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP

specification

type		Distance setting type (BGS/FGS)
appearance		rectangle
output		PNP
Connection patterns		M8 connector (4-pin)
Detection distance		35 to 250 mm (215 to 0)*1
Standard detection segment difference		35 to 180 mm: 9 mm
		180 to 250 mm: 25 mm
Display resolution		1 to 3 (1 to 3 mm)
Spot diameter		At 250 mm, approx. 2.4 × 1.2 mm
Response time		1.5ms/10ms/50ms switching
light source	type	Red laser (660 nm)
	Laser classification	Class 1 laser products
		(IEC60825-1、FDA (CDRH) Part1040.10*2)
function	Light	3-digit 7-segment display (red), output indicator (yellow),
		DATUM indicator (orange), 1 spot indicator (green)
	timer	OFF/ON- Delay/OFF- Delay/One Touch
Electrical Specifications	Supply voltage	10-30 VDC, including fluctuation 10% (p-p), Class 2 or LPS
	Power consumption	450 mW or less (18 mA at 24 V, 34 mA at 12 V)
	Control the output	PNP open collector
		The applied voltage is less than 30 VDC, the control current is less than 100 mA,
		Below 1.2 V at 10 mA and 2 V at 10 to 100 mA
	Protection circuits	Power supply reverse polarity protection, output overcurrent protection, output surge protection, output reverse polarity protection
	Output actions	The switching method of ON when entering light / ON when shading
	External inputs	Input time Tuning: ON when 35 ms or more, OFF when 35 ms or more
		Beam stop: ON when 2 ms or more, OFF when 20 ms or more
		Short-circuit current NPN: 1 mA or less / PNP: 2 mA or less
Environmental resistance	Enclosure protection grade	IP68 (IEC60529)、IP69K (DIN40050-9)、ECOLAB3、Diversey3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient lighting	Incandescent lamps: 2,000 lux or less
		Daylight: 4,000 lux or less*4
	Ambient temperature	-10 to +50 °C (no freezing)
	Store at ambient temperature	-25 to +75 °C (no freezing)
	relative humidity	35 to 85 % RH (non-condensing)
	Withstand voltage	1,000 VAC、50/60 Hz、1 min
	Earthquake resistance	10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions
	Impact resistance	6 times each in the 1,000 m/s2, X, Y, Z directions
Material		Housing: SUS316L, Display: PES, Lens Cap: PMMA with anti-scratch coating, Gasket / Connector Ring: FKM
annex		Instruction Manuals, Certifications/Identification Labels (FDA)
weight		Approx. 55 g

*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".

*2 The FDA's (CDRH) laser classification is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.

*3 We have conducted durability tests on cleaning agents at each company.

*4 Response time is 10 ms

This article introduces the LR-Z series LR-ZB250CP products with CMOS laser sensor built into KEYENCE/KEYENCE amplifiers, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP

Sections viewed

Contact

working hours