KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C

KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C

Model		LR-XN11C
type		NPN Output/PNP Output (Switched Output)
Cables/connectors		M8 connector*1
Main Unit/Extended Unit		Main unit (additional units are not supported)
Control the number of outputs		2*2
Number of external inputs		1*2
Response time		500 μs*3 / 1 ms / 3 ms / 10 ms / 200 ms switchable
IO-Link		Specification v1.1/COM2 (38.4kbps)
function	Timer function	Timer Disable / Off Delay / On Delay / Single Pulse / On - Off Delay / Turn on Single Delay
Input and output	Control the output	Open collector 30 VDC or less, N.O. / N.C. switchable
		1 Output maximum 100 mA or less / 2 Total output 100 mA or less
		Residual voltage NPN: 1.4 V or less (output current 10 mA or less) / 2 V or less (output current 10 to 100 mA), PNP: 1.6 V or less (output current 10 mA or less) / 2.2 V or less (output current 10 to 100 mA)
	External inputs	External Set Input / Illumination Stop / Zero Input / Reset Hold / Orientation Alarm Contact Switching
		Short-circuit current NPN: 1 mA or less, PNP: 2 mA or less
		Input time: 3 ms ON or more, 20 ms or more OFF (25 ms ON or more, 25 ms or more OFF only when tuning is selected)
Expansion units were added		—
Protection circuits		Power supply reverse polarity protection, output overcurrent protection, output surge protection, output reverse polarity protection
Number of anti-jamming units		—
power supply	Supply voltage	16 to 30 VDC*4 (including ripple (P-P) 10% or less), class2
	Power consumption	Typical: 1150 mW (47 mA at 24 V, 64 mA at 16 V), 985 mW at ON and ALL (40 mA at 24 V, 53 mA or less at 16 V) (except load current)
Environmental resistance	Use ambient temperature	-20 to +55°C (no freezing)*5
	Humidity of the working environment	35 to 85% RH (non-condensing)
	Vibration resistance	10 to 500 Hz power spectral density: 0.816G2/Hz X, Y, Z direction
	Impact resistance	500 m/s2 (50 G) X, Y, Z 3 times in each direction
Housing material		Main unit, cover: Polycarbonate
annex		Instruction manual
weight		About 22 g

*1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.

*2 Output 2 and external input are switched.

*3 When 500 μs is selected, the following limits are specified.

· Tuning is limited to 2-point tuning.

· The detection range shield is set during tuning. (Manual setting of the shielding range is not supported)

· Output 2 is limited to the output of alarms such as errors and orientation monitoring, and no standard/zone can be used.

· The anti-interference function is not supported

*4 When adding more than 4 expansion units, set the supply voltage to 20 V or more.

*5 -20 to +55°C for 1 to 2 units, -20 to +50°C for 3 to 10 units, -20 to +45°C for 11 to 16 units

This article introduces the KEYENCE/KEYENCE laser sensor LR-X series LR-XN11C products, if you are interested in KEYENCE/KEYENCE sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C

Sections viewed

Contact

working hours