KEYENCE/KEYENCE Guided Pulse Level Sensor FL Series IP67 Protection

Introduction: KEYENCE/KEYENCE Guided Pulse Liquid Level Sensor FL series adopts the newly developed "Sensing Guided Pulse Method", which is not affected by the flow obstruction parts in the environment, and can automatically adjust to the adhesion to achieve stable sensing. After installation, it can be started in just three steps, saving valuable time for the first setup. A variety of output specifications are available to support stable detection in any environment.

KEYENCE/KEYENCE Guided Pulse Level Sensor FL Series IP67 Protection

Features:

Stable detection at all times

Solve various problems of liquid level sensing

It is easy to mount and easy to use

Product parameters

Model			FL-001	FL-C001
type			Standard (G3/4)	Liquid medicine type
Detection range			100 to 2,000 mm	200 to 2,000 mm
The relative permittivity of the measurable medium			2 or more *1	3 or more *1
resolution			1 mm *2
linearity			±3 mm*2
Temperature characteristics			0.1 mm/℃
Insensitive area	Measure the water level	Upper side	25 mm
		underside	10 mm *3	Up to 33 mm *3
	Measure the oil level	Upper side	50 mm	25 mm
		underside	30 mm *3	Up to 53 mm *3
Determine the output response time			Minimum 0.4 s
The horizontal torque of the probe			6 N·m
Vessel pressure			-0.1 to +0.5 MPa	-0.1 to +0.1 MPa
Connecting the aperture of the hole			G3/4	G3/4 is used on the dedicated probe side
output	Judgment output/alarm output		NPN/PNP open collector (switched) up to 30 VDC with a maximum of 50 mA each Residual voltage NPN 2 V or less/PNP 2.5 V or less, N.O./N.C. switchable
	Analog output		4 - 20 mA maximum load resistance 350 Ω (response time: 0.1 s [90 % response] after the judgment output is determined) Ripple voltage (P-P) of 2 % F.S. or less when the workpiece is stationary
Support network			IO-Link *4
Analog output accuracy	resolution		1 mm
	Zero-back accuracy		±0.1 mA (zero = 4 mA)
	Full scale accuracy		±0.2 mA (full scale = 20 mA)
Cables are supported			M12 connector (8-pin)
rated	Supply voltage		10 - 30 VDC with ripple voltage (P-P) 10 %, Class 2 or LPS
	Current consumption		300 mA at 10 V / 120 mA at 30 V or less (except load)
Environmental resistance	Enclosure protection grade		IP67
	Ambient temperature		-20 to +60 °C	-10 to +60 °C *5
	relative humidity		35 to 85 % RH (non-condensing)
Environmental resistance	The temperature of the medium used		-20 to +100 °C	-10 to +110 °C *5
Environmental resistance	Earthquake resistance		10 to 55 Hz double amplitude 0.75 mm 2 hours each in the X, Y, Z directions
	Impact resistance		300 m/s2 3 times each in 6 directions
material	Wetted material		Probe: SUS304, Housing bottom sealing tape part: PTFE, Gasket: FKM (inside of the sealing part)	Sleeve: PFA, Probe: SUS304 (not directly wetted)
	enclosure		Shell metal part: SUS304, SUS303 Housing resin part: PBT, PAR, NBR, HNBR, PET	Housing resin: PPS, PPSU, FKM, PVC Cable gland: Brass nickel plated (Ni)
weight			400 g	380 g

This article introduces the KEYENCE/KEYENCE Guided Pulse Level Sensor FL series products, if you are interested in KEYENCE/KEYENC Level Sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

KEYENCE/KEYENCE Guided Pulse Level Sensor FL Series IP67 Protection

Sections viewed

Contact

working hours