KEYENCE/KEYENCE Square Reflective Type (Background Suppression) Cable Type 30mm PR-FB30N1
specification
Model | PR-FB30N1 | type | BGS reflection | output | NPN | shape | bracket | Connection patterns | 1m cable | Detection distance | 1 to 30 mm | Control the number of outputs | 2 | Output actions | Output 1 | ON when light is in | Output 2 | ON when shading | Response time | Output 1 | 0.5 ms | Output 2 | ON → OFF:2.7ms、OFF → ON:0.5ms | Sensitivity adjustment | N/A | Spot diameter | Approx. ø5mm (at 30mm) | light source | 4 Element Point Light Red LED (650nm) | Prevent mutual interference function | 4 units | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | Control the output | 30 VDC or less, 50 mA or less | Leakage current: | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | Residual Voltage: | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | Current consumption | 19 mA | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | Insulation resistance | 20 MΩ or more (500 VDC) | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | Ambient temperature | -25 to +55 °C (no freezing) | Store at ambient temperature | -25 to +75 °C | relative humidity | 35 to 85 % RH (non-condensing) | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | fittings | Operator's manual | weight | About 18 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-FB30N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250C (Detection Distance: 250mm)
Laser sensor standard type M8 connector type (detection distance 250mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2 points ...
|
|
KEYENCE/KEYENCE Photoelectric Sensors PX Series Shock resistant 10 to 55Hz
Introduction: KEYENCE's new PX series of ultra-strong industrial photoelectric sensors, rugged industrial sensors, are designed for use in demanding environments. The entire body of the PX Series enclosure is filled with transparent epoxy resin under vacuum. This ensures that the cables and lenses are firmly adhered to the body, ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-360
Sensing head 360 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 When facing at the base distance. ...
|
|
KEYENCE/KEYENCE Proximity Sensor EM Series Detection Distance: 8mm
Description: Proximity sensor EM series ultra-small sensor head, small size, sensor amplifier in cable, with built-in LED indicator, detection distance up to 8mm. Rugged, flexible cables and IP-67 waterproof housing.
...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30CP
Mini slim BGS reflective M8 connector type 30mm
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-MB30CP products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we hope to ...
|
|
KEYENCE/KEYENCE Proximity Sensor EV Series Power Supply 12~24VDC
Introduction: KEYENCE/KEYENCE Stand-Alone Proximity Sensor EV Series Compact Sensing Head, Disturbance Cable Connector, Visual Output Indicator Built into the Sensor, Short, Space-Saving, High Sensitivity and Long Detection Distance. IP67-rated enclosure.
...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H027
Sensor head wide type laser class 2 LK-H027
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H027 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, we hope ...
|
|
KEYENCE/KEYENCE Photoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87673
Slit plate 0.5×3 mini ultra-thin
Type: Slender Small, slender and elongated
Number of Builts: 1pcs
Slit plate size: 0.5×3
Material: SUS304
Remarks: ・Detection distance: 180mm (when both transmitter and receiver sides are attached) ・Transmission type only
Weight: approx. 1 g
This paper...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H057
Sensor head wide type laser class 2 LK-H057
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H057 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15P3
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15P3
specification
This article introduces the KEYENCE/KEYENCE UV-M series of photoelectric sensors with built-in amplifiers.
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87670
Slit plate φ0.5 square use
Type: Slender for flat surfaces
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight; About 1 g
This article introduces KEYENCE's ...
|
|
KEYENCE/KEYENCE Photoelectric Sensor PZ-G Series weighs about 10g
Introduction: KEYENCE's powerful optical photoelectric sensor PZ-G series ultra-high power built-in threaded sensor, significantly improved performance and easy to use, the sensor head lineup is available in transmissive type, reflective type and regressive reflective type, the appearance of the alignment indicator makes the optical axis alignment of the long-distance sensor ...
|
|
KEYENCE/KEYENCE Photoelectric Sensor LR-W Series Power Supply 10 to 30VDC
Introduction: The unique technology used in the LR-W series gives it the ability to analyze the full spectrum. The series detects all differences, from surface finish differences that are difficult to see with the naked eye to color changes. The LR-W's metal housing and IP65/67 enclosure rating allow it to withstand the harsh environment of the environment.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C
*1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Output 2 and external input are switched ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51CN
KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51CN Flat Permeable Type M8 Connector Type 0.6m
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-F51CN products.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952
LAN cable (RJ-45-RJ-45) 5 m
Length; 5 m
Weight: approx. 300 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K
Sensor head Spot Type LK-H022K
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H022K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope we ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P Laser Sensor Amplifier Split Amplifier Cable Type Main Unit PNP
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87953
LAN cable (RJ-45-RJ-45) 10 m
Type: LAN cable
Length: 10 m
Weight: approx. 600 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87953 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customers.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN Flat BGS Reflective M8 Connector Type 15mm
specification
In this article, we introduce the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F Series PR-FB15CN Series ...
|
|