KEYENCE/KEYENCE Multi-Point Laser Sensor IX-360

Sensing head 360 mm

KEYENCE/KEYENCE Multi-Point Laser Sensor IX-360

specification

Base distance				360 mm
Measure distances				280 to 440 mm
Detection range	Scan mode			Measuring distance 280 mm: 66.0 × 49.5 mm or more
				Measuring distance 360 mm: 84.0 × 63.0 mm or more
				Measuring distance 440 mm: 102.0 × 76.5 mm
				(X direction)× (Y direction)*1
	Straight line mode			Measuring distance 280 mm: 66.0 mm or more
				Measuring distance 360 mm: 84.0 mm or more
				Measuring distance 440 mm: 102.0 mm
				(X direction)*1
Laser light source	light source			Red diode laser wavelength 660 nm (visible light)
	Laser class			Class II laser products (FDA (CDRH) Part 1040.10), Class 2 laser products (IEC 60825-1:2014)
	output			0.95 mW（FDA（CDRH）Part1040.10）、1.6 mW（IEC 60825-1：2014）
Height (Z direction)	Minimum Detection Object (Reference)	Scan mode	height	ø1.8 mm *2
			Area height	ø1.2 mm *3
			Pin height	ø0.9 mm *4
		Straight line mode		1.2 mm × 1.5 mm *5
	Repeatability			150 µm *6
Landscape (X direction)	Edge Detection Reference	Straight line mode		1 mm *7
Detection reference				(Detection Reference: When measuring the height between different 2 points, the standard detection reference is.)
				IX-055：100 µm IX-080：200 µm IX-150：500 µm IX-360：1000 µm IX-360W：1000 µm。） *6
Sampling period	Scan mode			120 ms or more (example)
	Straight line mode			6 ms/11 ms (option)
Image receiving element				Monochrome CMOS image sensor
Lighting for shooting	light source			Red LED
	Lighting mode			Pulse lights up
Temperature characteristics				0.08% of F.S./°C *8
Environmental resistance	Enclosure rating			IP67
	Ambient lighting			Incandescent lamps 5000 lux or less *9
	Ambient temperature			0 to +45°C (no freezing)*10
	relative humidity			35 to 85% RH (non-condensing)
	Earthquake resistance			10 to 55 Hz double amplitude 1.5 mm 2 hours each in the X, Y, Z directions
	Impact resistance			500 m/s2 3 times in each of the 3 directions
Material				Main Case: Zinc Casting / Front Cover: Glass, Acrylic (Hard Coating) / Action Indicator Cover: TPU / Connector Ring: PBT / Connector: Zinc Casting
weight				Approx. 190 g

*1 X: Laser long dimension direction, Y : Laser short dimension direction

*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.

*3 When facing at the base distance. Scan mode: When measuring with the Area Height tool, small average size, and no position correction.

*4 When facing each other at the base distance. Scan mode: When measuring with a pin height tool and no position correction.

*5 When facing the installation at the base distance. Straight Line Mode: When measuring with the height tool, the smallest tool window size, and no position correction.

*6 In scan mode, the value measured when a KEYENCE standard target (white diffusion plate) is placed in the center of the field of view at a reference distance using the measurement point "Large" of the height tool.

*7 When facing up at the base distance.

In straight-line mode, when measuring a block gauge with an average filter: 4 times, edge position tool, and no position correction.

In the width mode of the Width/Diameter tool, the detection reference is 2 times the edge detection reference value. The minimum height difference (reference) required for edge detection for each model at the reference distance is shown below.

IX-055：0.8 mm、IX-080：1.0 mm、IX-150：2 mm、IX-360：4 mm、IX-360W：4 mm

*8 When the distance to the target is the base distance.

The F.S. for each model is as follows.

IX-055：±10 mm、IX-080：±18 mm、IX-150：±50 mm、IX-360：±80 mm、IX-360W：±80 mm

*9 At the time of initial setting. The object is a laser light source.

*10 When metal is mounted.

This article introduces KEYENCE/KEYENCE multi-point laser sensor IX-360 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business

KEYENCE/KEYENCE Multi-Point Laser Sensor IX-360

Sections viewed

Contact

working hours