KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN

Create Date: 2024-8-30 12:03:23|Source: KEYENCE

Product Description
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN Flat BGS Reflective M8 Connector Type 15mm
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN

specification
ModelPR-FB15CN
typeBGS reflection
outputPNP
shapebracket
Connection patternsM8 connector: 4-pin
Detection distance1 to 15 mm
Control the number of outputs2
Output actionsOutput 1ON when light is in
Output 2ON when shading
Response timeOutput 10.5 ms
Output 2ON → OFF:2.7ms、OFF → ON:0.5ms
Sensitivity adjustmentN/A
Spot diameter2.5x4.5mm (at 15mm)
light source4 Element Point Light Red LED (650nm)
Prevent mutual interference function4 units
Displays an indicatorOutput Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green)
Control the output30 VDC or less, 50 mA or less
Leakage current:
0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ
Residual Voltage:
Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA
Protection circuitsPower supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection
ratedSupply voltage10 to 30 VDC, including ripple (P-P) 10 %
Current consumption19 mA
Environmental resistanceEnclosure protection gradeIP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250)
Insulation resistance20 MΩ or more (500 VDC)
Ambient lightingIncandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less
Ambient temperature-25 to +55 °C (no freezing)
Store at ambient temperature-25 to +75 °C
relative humidity35 to 85 % RH (non-condensing)
Withstand voltage1,000 VAC、50/60 Hz、1 min
Earthquake resistance10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions
Impact resistance6 times each in the 1,000 m/s2, X, Y, Z directions
MaterialHousing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin
fittingsOperator's manual
weightAbout 10 g
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-FB15CN series PR-FB15C3PL products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

More on that
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-B01 KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-B01

Squared Standard mounting metal parts Type: Flat standard mounting bracket Number of Builts: 1pcs Material: SUS316L Note: Comes with M3 screw×2 Weight: approx. 8 g In this article, we introduce the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series O...

KEYENCE/KEYENCE Photoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87673 KEYENCE/KEYENCE Photoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87673

Slit plate 0.5×3 mini ultra-thin Type: Slender Small, slender and elongated Number of Builts: 1pcs Slit plate size: 0.5×3 Material: SUS304 Remarks: ・Detection distance: 180mm (when both transmitter and receiver sides are attached) ・Transmission type only Weight: approx. 1 g This paper...

KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87667 KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-87667

Square nut for square Type: Plate nut for flat surface Target products: PR-F series Number of Builts: 2 pcs Material: SUS316L Weight: approx. 1 g In this article, we introduce the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series OP-87667 ...

KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497 KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497

Connector cable M8L word 2m PVC specification This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.

KEYENCE/KEYENCE Multi-Point Laser Sensor OP-88551 KEYENCE/KEYENCE Multi-Point Laser Sensor OP-88551

Sensing head - 20 m of inter-controller cable Length: 20 m Weight: approx. 760 g This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-88551 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you.

KEYENCE/KEYENCE sensor LJ-G015 KEYENCE/KEYENCE sensor LJ-G015

Enclosure rating: IP67 (IEC60529) Ambient light: Incandescent/fluorescent: 5,000 lux*5 max Ambient temperature: 0 to +50 °C Relative humidity: 35 to 85 % RH (non-condensing) Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...

KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87622 KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series OP-87622

Connector cable M8 straight type 2m chemical resistant Applicable products: PR-G series Quantity: 1 End Shape: M8 Straight - Scattered Length: 2 m Material: Cable: PUR, nut: Zinc nickel plating Weight: approx. 65 g This article introduces the KEYENCE/KEYENCE ...

KEYENCE/KEYENCE Touch Screen Unit LK-HD1001 KEYENCE/KEYENCE Touch Screen Unit LK-HD1001

KEYENCE touch screen unit LK-HD1001 specification This article introduces KEYENCE/KEYENCE touch screen unit LK-HD1001 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our technology and service ...

KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S025 KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-S025

keyence CMOS Laser Displacement Sensor IL Series Sensor Probe IL-S025 Base distance: 25 mm Measuring distance: 20 to 30 mm Enclosure rating: IP67 Pollution level: 3 Ambient light: Incandescent lamp: 10,000lux*5 Ambient temperature: -1 ...

KEYENCE/KEYENCE Sensor Head CB-A10E KEYENCE/KEYENCE Sensor Head CB-A10E

Sensor Head – Extension cable 10m CB-A10E for controller Length: 10 m Weight: approx. 750 g This article introduces the KEYENCE/KEYENCE sensor head CB-A10E products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to ...

KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30N3 KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30N3

Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N3 specification This article introduces the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-MB30N3 products, if you are interested in KEYENCE/KEYENCE products, please contact me ...

KEYENCE/KEYENCE digital laser sensor LV-N11CN KEYENCE/KEYENCE digital laser sensor LV-N11CN

Amplifier M8 connector Main unit NPN LV-N11CN Supply voltage: 24 VDC (operating voltage 10-30 VDC (including ripple)), ripple (P-P) 10 % or less, Class 2 or LPS*4*5 Ambient temperature: -20 to +55 °C (no freezing)*8 Relatively wet ...

KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N1 KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N1

Square Permeable Cable Type 0.6m PR-F51N1 This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-F51N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH250 Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 250mm) with a cable length of 2 m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) according to the IEC60825-1 standard. This paper...

KEYENCE/KEYENCE Sensor Head LJ-V7060K KEYENCE/KEYENCE Sensor Head LJ-V7060K

Sensor head LJ-V7060K Reference distance: 54.6 mm Enclosure rating: IP67 (IEC60529)*7 Ambient light: Incandescent lamp: 10,000 lux*8 max Ambient temperature: 0 to +45 °C*9 Relative humidity: 85%RH or less (non-condensing) Earthquake resistance: ...

KEYENCE/KEYENCE Multi-Point Laser Sensor IX-055 KEYENCE/KEYENCE Multi-Point Laser Sensor IX-055

IX-055 sensor head 55 mm specification *1 X: Laser long dimension direction, Y : Laser short dimension direction *2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction. *3 Positive alignment at the reference distance

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 (Detection Distance: 250mm) KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 (Detection Distance: 250mm)

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250 Laser Sensor Standard Cable Type (Detection Distance: 250mm) *1 When 500 μs is selected, the following limits are specified. · Tuning is limited to 2-point tuning. · When tuning, the detection range screen is set ...

KEYENCE/KEYENCE High Precision 2D Laser Displacement Sensor LJ-G5000 Series KEYENCE/KEYENCE High Precision 2D Laser Displacement Sensor LJ-G5000 Series

The LJ-G series can accurately measure the contour of the surface of objects in the X and Z directions. The height, width and clearance on the surface profile can be measured in 28 measurement modes. Product Features: Simultaneous measurements can be taken at 8 points. The E3-CMOS image sensor provides stable measurements Quatro Connect ...

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M) KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M)

KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 50 mm) with a cable length of 10 m *1 Classified according to Laser Notice No. 56 in the FDA (CDRH) on the IEC60825-1 basis ...

KEYENCE/KEYENCE Fiber Optic Components Visual Receiver FU-R77TZ KEYENCE/KEYENCE Fiber Optic Components Visual Receiver FU-R77TZ

Type: Optical fiber with indicator type (visual receiver) Threaded hexagonal fiber Optical axis diameter Beam: ø 1 mm Reception: ø 3.2 mm Size M4 The length of the fiber optic unit is 2 m and can be cut freely Diameter of the fiber optic unit ø 2.2 Shape: Hexagonal Small...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top