KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Square Reflective Type (Background Suppression) Cable Type 15mm PR-FB15P3
specification
| Model | PR-FB15P3 | | type | BGS reflection | | output | PNP | | shape | bracket | | Connection patterns | 3M cables | | Detection distance | 1 to 15 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | 2.5x4.5mm (at 15mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | 1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | fittings | Operator's manual | | weight | About 40 g |
This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F series products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG (Detection Distance: 250mm)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250CG Laser Sensor Standard M8 Connector Metal Sheathed Cable Type (Detection Distance: 250mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB30P3
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective Cable Type 30mm PR-FB30P3
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-FB30P3 products.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1550
Amplifier unit Panel mount type IL-1550
Power supply voltage: Supplied by the main module*3
Power consumption: 2200mW or less (74mA or less at 30V)
Environmental resistance
Pollution level: 2
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relatively wet ...
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP
Square Reflective M8 connector type 250mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87953
LAN cable (RJ-45-RJ-45) 10 m
Type: LAN cable
Length: 10 m
Weight: approx. 600 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87953 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customers.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N1
Square Permeable Cable Type 0.6m PR-F51N1
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F SERIES PR-F51N1 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series LR-TB2000CL
Detection distance: 2m M12 connector cable type Laser classification 1
Specifications*1 can display a range of 50 to 2200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be carried out from a combination of ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZB250AP
Square Reflective Cable Type 250mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on IEC608 ...
|
|
KEYENCE/KEYENCE Proximity Sensor ET Series consumes 45mA
Introduction: KEYENCE's ET series miniature probe head, innovative sensing technology, does not detect ferrous metals, accurately detects non-ferrous metals, and is suitable for ultra-small proximity sensors of various non-ferrous metals (including aluminum).
Product parameters
...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87670
Slit plate φ0.5 square use
Type: Slender for flat surfaces
Number of Builts: 1pcs
Slit plate size: ø0.5
Material: SUS304
Remarks: ・Detection distance: 30mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight; About 1 g
This article introduces KEYENCE's ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7300
Installation Status: Diffuse
Reference distance: 300 mm
Enclosure Rating: IP67 (IEC60529)*8
Ambient light: Incandescent lamp: 10,000 lux*9 max
Ambient temperature: 0 to +45 °C*10
Relative humidity: 85%RH or less (non-condensing)
Seismic resistance: 1 ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11N Laser Sensor Amplifier Split Amplifier Cable Type Main Unit NPN
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-FB15CN Flat BGS Reflective M8 Connector Type 15mm
specification
In this article, we introduce the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F Series PR-FB15CN Series ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87951
LAN cable (RJ-45-RJ-45) 3 m
Type: LAN cable
Length: 3 m
Weight: approx. 180 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87951 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-88044
NFPA79 standard Ethernet cable L type 5 m
Length: 5 m
Note: Used for the connection between sensors, PCs or Ethernet switches. When using the IV Series as a UL certified product, use an NFPA79-capable Ethernet cable.
This article introduces the KEYENCE/KEYEN...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-CP50
Control panel for IX
specification
*1 Dedicated to connection to IX-1000/1050/H2000/H2050.
*2 When connecting to the IX-H2000/H2050, only Chinese (Simplified), Japanese, and English are supported
*3 Please use KEYENCE's recommended products.
*4 When the ambient temperature exceeds 40°C, ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87664
Adjustable relay metal fittings
Type: Adjustable trunk mount
Applicable products: PR series, PZ series, LR series
Material: Zinc nickel plated, others
Weight: approx. 190 g
In this article, we introduce the KEYENCE/KEYENCE UV-miniature amplifier built-in photoelectric sensor PR-M/F series ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-X250C (Detection Distance: 250mm)
Laser sensor standard type M8 connector type (detection distance 250mm)
*1 The cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2 points ...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Ultra-Small Amplifier PR-M/F Series OP-87671
Slit plate 0.5×3 square use
Type: Slender for flat surfaces
Number of Builts: 1pcs
Slit plate size: 0.5×3
Material: SUS304
Remarks: ・Detection distance: 120 mm (when both transmit and receiver sides are attached) ・Transmission type only
Weight: approx. 1 g
This article introduces the ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H152
Sensor head spot type laser class 2 LK-H152
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H152 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
Contact
working hours
