Mini slim BGS reflective M8 connector type 30mm
specification
| Model | PR-MB30CP | | type | BGS reflection | | output | PNP | | shape | Compact and slender | | Connection patterns | M8 connector: 4-pin | | Detection distance | 1 to 30 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø5.5mm (at 30mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | 1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | weight | About 13 g |
This article introduces the KEYENCE/KEYENCE ULTRA-SMALL AMPLIFIER built-in photoelectric sensor PR-M/F series PR-MB30CP products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87950
LAN cable (RJ-45-RJ-45) 1 m
Type: LAN cable
Length: 1 m
Weight: approx. 60 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87950 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906
I/O cable 3m
Type: I/O cable
Length: 3 m
Weight: approx. 230 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87906 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H053
Sensor head Spot type laser class 3B LK-H053
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H053 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87904
Sensor head cable 5 m
Type: Sensor head-to-amplifier cable
Length: 5 m
Weight: approx. 360 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87904 product, if you are interested in KEYENCE/KEYENCE products, please also contact our ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C
*1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Output 2 and external input are switched ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-030
Base distance: 30 mm
Measuring distance: 20 to 45 mm
Enclosure rating: IP67
Pollution level: 3
Ambient light: Incandescent lamp: 5,000 lux*5
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH ( ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N1
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N1
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-MB15N1 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Amplifier Built-in CMOS Laser Sensor LR-Z Series LR-ZH500CN
Square type High power reflective type M8 connector type 500mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 Cleaned by each company ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-080
Sensing head 80 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 When facing at the base distance. Sweep...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952
LAN cable (RJ-45-RJ-45) 5 m
Length; 5 m
Weight: approx. 300 g
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87952 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to hearing from you.
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB30N1
Mini Slim Reflective Type (Background Suppression) Cable Type 30mm PR-MB30N1
specification
This article introduces the KEYENCE/KEYENCE subminiature amplifier built-in photoelectric sensor PR-M/F Series PR-MB30N1 products, if you are interested in KEYENCE/KEYENCE products, please contact me ...
|
|
KEYENCE/KEYENCE High Precision 2D Laser Displacement Sensor Controller LJ-G5001
Main functions: sensor head calculation, contour adjustment, filter, smoothing, averaging, position adjustment, OUT name change, measurement mode selection
(Height, Position, Gap, Width, Center Position, Cross-sectional Area, Crossing, Angle, Contour Comparison, Contour Tracking),
Zoom...
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series OP-87636
Connector cable M12 straight type 2m oil resistant
Quantity: 1
End Shape: Sensor Side: M12 4pin Straight, Cable Termination: Loose wire
Length: 2 m
Material: PUR (Polyurethane)
Weight: approx. 75 g
This article introduces the KEYENCE/KEYENCE amplifier ...
|
|
KEYENCE/KEYENCE Photoelectric Sensor PZ-V Series The response time is 1ms
Introduction: KEYENCE's stand-alone photoelectric sensor PZ-V/M series uses a laser sensor with distance principle detection, which is not easily affected by the color and tilt of the workpiece, and performs stable detection. Unaffected by highly reflective target backgrounds, it is highly resistant to dust and dirt.
...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN12N
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier Cable Type Expansion Unit NPN LR-XN12N
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range shield is set during tuning. (The screen is not supported...)
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51CP
KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F series flat permeation type, M8 connector type, 0.6mPR-F51CP
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-F51CP products.
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50(10M)
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XH50 (10M) Laser Sensor Amplifier Split Type Sensor Head (Detection Distance: 50 mm) with a cable length of 10 m
*1 Classified according to Laser Notice No. 56 in the FDA (CDRH) on the IEC60825-1 basis ...
|
|
KEYENCE/KEYENCE Vibration Sensor GA Series - GA-223
KEYENCE/KEYENCE Vibration Sensor GA Series - GA-223
Targets of different materials can be stably detected
Built-in monitor output
Delay the timer to turn on
This article introduces the KEYENCE/KEYENCE Vibration Sensor GA Series-GA-223 products.
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497
Connector cable M8L word 2m PVC
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
|
|
KEYENCE/KEYENCE Amplifier Built-in TOF Laser Sensor LR-T Series LR-TB5000CL
Detection distance: 5m M12 connector cable type Laser classification 1
specification
*1 Can be displayed from 50 to 5200.
*2 The classification by the FDA (CDRH) is based on IEC60825-1 and is implemented in accordance with the requirements of Laser Notice No. 50.
*3 I/O can be advanced from the following combinations ...
|
|
Contact
working hours
