KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51CN Flat Permeable Type M8 Connector Type 0.6m
specification
| Model | PR-F51CN | | type | permeance | | output | NPN | | shape | bracket | | Connection patterns | M8 connector: 4-pin | | Detection distance | 0.6 m | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when shading | | Output 2 | ON when light is in | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | ― | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | ― | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | Less than 1.0 V at 10 mA, less than 1.5 V at 10 to 30 mA, and less than 2.0 V at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | Transmitter: 11 mA, receiver: 16 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | fittings | Operator's manual | | weight | About 42 g |
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series PR-F51CN products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE Fiber Optic Unit Limited Reflective Type FU-38L
Fiber Optic Unit Limited Reflective Type FU-38L
The direction in which the light is emitted: Bracket
Fiber optic device length: 2m free cut
Diameter of the fibre optic unit: ø2.2×2
Minimum bending radius: R25 mm
Environmental Resistance Ambient temperature: -40 to +60 °C
Weight: approx. 20 g
Root...
|
|
KEYENCE/KEYENCE 2D/3D Line Laser Measuring Instrument LJ-X8000 Series
3200point/profile, accurately capture the real shape; 16KHZ, ultra-high-speed sampling; Automatic correction measurement, not easy to be affected by product offset; It can be easily set up in 3 steps, with high accuracy and ease of operation.
Product Features:
Ultra-high accuracy measurement 4 times higher than before*
Adopt...
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Amplifier PR-M/F Series OP-87665
Adjustable bracket mounts metal parts 200mm
Type: Adjustable bracket mount
Applicable products: PR series, PZ series, LR series
Length: 200 mm
Material: SUS304
Remarks: Comes with M3 screw×4, small slim type/plate nut for bracket ×1
Weight: approx. 7 ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H008
Sensor head Spot Type LK-H008
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H008 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N3
KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F Series Square Permeable Type Cable Type 0.6m PR-F51N3
This article introduces the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51N3 products.
|
|
KEYENCE/KEYENCE Contact Digital Sensor GT2 Series has a withstand voltage of 1.0 MPa
Introduction: Pursuit of a general-purpose digital contact sensor that is easy to use.
peculiarity
Environmentally resistant sensor: IP67 rated housing
An error-free two-stage transformer method is designed
Simplified installation reduces total cost
Installation is simple and convenient
Simplified ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11C
KEYENCE/KEYENCE Laser Sensor Amplifier Discrete Amplifier M8 Connector Type Main Unit LR-XN11C
*1 The power cable length of the M8 connector type is 30 m or less. When connecting IO-Link, keep it to less than 20 m.
*2 Output 2 and external input are switched ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K
Sensor head Spot Type LK-H022K
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H022K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope we ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H152
Sensor head spot type laser class 2 LK-H152
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H152 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Fiber Optic Sensor CZ-V20 Series The input time is 20ms
Introduction: KEYENCE/KEYENCERGB Digital Fiber Optic Sensor CZ-V20 series two new sensor heads once again broaden the application range of ultra-small RGB sensors; The setup is simple, and the setup can be completed with just one button press; Three detection modes are available for a wide range of targets.
...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series Rear Mounting Bracket OP-88500
KEYENCE/KEYENCE Laser Sensor LR-X Series Rear Mounting Bracket OP-88500
Shape: Back mounting bracket (sensor probe fixing screws × 2 accessories)
Material: SUS316L etc
Weight: approx. 17 g
This article introduces the KEYENCE/KEYENCE laser ...
|
|
KEYENCE/KEYENCE 3D Development Edition Controller LJ-X8000E
Compatible with 2D controller LJ-X8000E
Control inputs: 20 points (5 points for input terminal blocks, 15 points for parallel I/O)
Control output: 28 points (6 points for output terminal block, 22 points for parallel I/O) ・Photo MOSFET*3
Laser ON Input: No Voltage Input (Factory ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-M51CN
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series Mini Slim Permeable Type M8 Connector Type 1.2m
specification
This article introduces the KEYENCE/KEYENCE ultra-miniature amplifier built-in photoelectric sensor PR-M/F series.
|
|
KEYENCE/KEYENCE Optoelectric Sensor with Built-in Subminiature Amplifier PR-M/F Series OP-85497
Connector cable M8L word 2m PVC
specification
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F series OP-85497 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your visit.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-100
Base distance: 100 mm
Measuring distance: 75 to 130 mm
Enclosure rating: IP67
Pollution level: 3
Ambient light: Incandescent lamp: 7,500 lux*5
Ambient temperature: -10 to +50 °C (no condensation, no freezing)
Relative humidity: 35 to 85 % RH ...
|
|
KEYENCE/KEYENCE LR-X50 laser sensor
Introduction: KEYENCE/KEYENCE Laser Sensor LR-X50 Ultra-Compact Laser Sensor 90g 0.5mm
It can be installed in a variety of places:
Although it is a laser sensor, it can be ultra-small × 9.427×17mm. Can be installed in very tight spaces. Can be cut for ...
|
|
KEYENCE/KEYENCE Ultra-Compact Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51P3
KEYENCE Subminiature Amplifier Built-in Photoelectric Sensor Square Permeable Cable Type 0.6m PR-F51P3
This article introduces the KEYENCE/KEYENCE ultra-small amplifier built-in photoelectric sensor PR-M/F Series PR-F51P3 products.
|
|
KEYENCE/KEYENCE Sensor Head LJ-G200
Enclosure rating: IP67 (IEC60529)
Ambient light: Incandescent/fluorescent: 5,000 lux*5 max
Ambient temperature: 0 to +50 °C
Relative humidity: 35 to 85 % RH (non-condensing)
Seismic resistance: 10 to 55 Hz, double amplitude 1.5 mm, X,Y,Z ...
|
|
KEYENCE/KEYENCE Sensor Head LJ-V7060K
Sensor head LJ-V7060K Reference distance: 54.6 mm
Enclosure rating: IP67 (IEC60529)*7
Ambient light: Incandescent lamp: 10,000 lux*8 max
Ambient temperature: 0 to +45 °C*9
Relative humidity: 85%RH or less (non-condensing)
Earthquake resistance: ...
|
|
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10
KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10
Length: 10 m
Weight: approx. 550 g
This article introduces the KEYENCE/KEYENCE Sensor Head-Controller Cable CB-A10 products, if you are interested in KEYENCE/KEYENCE products, please also contact me ...
|
|
Contact
working hours
