When the IMX12 series isolation barriers were first released in 2015, we offered a dual-channel version of the analog input module. And the single-aisle and one-in, two-out models were not released at that time. Now, with the release of these new models, the IMX12 family will be even more complete. This is an important milestone in the development of the new series. Currently, we offer the IMX12 family for all important signal types.
Increasing market demands, such as precision, speed of response, safety, and space, have led to the development of products. The IMX12-AI product provides the perfect solution for analog signal processing in the cabinet. A single-channel isolation barrier can be used for a single circuit. One-in, two-out products are used when the signal needs to be split in two (e.g., control functions and local displays).
Key Features and Customer Benefits
As with the rest of the IMX12 series, these devices have state-of-the-art technical features that will provide users with the best possible investment protection.
High channel density
Compared to the IM31/IM33 series with a width of 18 mm, the single and dual channels with a width of 12.5 mm offer a more compact form factor and save nearly 50% of the installation space.
Optimal performance
The latest products guarantee high-quality signal transmission, high-temperature stability, a wide power supply range, excellent linearity and corresponding speed. The IMX12-AI series can also be used for a variety of special applications.
Worldwide certifications
Another highlight of the series is its global certification. Single- and dual-channel products are certified in key markets, including China, Europe, Korea, Russia, United States, and more.
SIL2
All models have a SIL2 functional safety level.
Wide power range
Like the other IMX12 series devices, the new models are designed to meet a wide power supply range of 10-30VDC.
Enhancements
All AI devices support the transmission of HART signals, which means that HART signals from field devices can be transmitted directly to higher control systems. This will enable the system to configure field devices directly.
The output side provides 4-20mA (active/passive) output and 1-5V output.
The input side has short-circuit and open-circuit monitoring. For example, when the input side is disconnected, an activation signal in accordance with the NE43 standard is sent to the system. In addition, the product has complementary outputs, so it can be applied to a variety of applications.
|
More on that
|
How Turck's flow sensors work
In order to ensure trouble-free testing and reliable inspection results in the manufacturing industry, many processes require the same inflow and outflow of liquid or gaseous media. In the automated production process, in addition to the pressure sensor and temperature, the measurement of flow rate is also very important. Based on the continuous ...
|
|
Turck's fluid sensor series wins the Automation Award
Turck's new fluid sensor product has been awarded the Automation Award by elektroAUTOMATION magazine. As the best product of the standard components and sensor set, this award was voted for by on-site users who visited the SPS trade fair in Nuremberg. The combination of a uniform technical concept and functional design, ...
|
|
Features of small torque sensors – Turck
1. Confirm the type of force sensor: There are two types of force sensors, one is electromechanical and the other is electronic.
2. Confirm the type of equipment: Acknowledge whether the equipment is a control circuit or a power circuit, and then purchase it as needed.
3. ...
|
|
Turck's BL ident with long-range UHF technology
BL ident products with long-interval UHF technology from Turck can be used in product control, logistics or process automation systems. Compared to HF, UHF has a longer read/write interval. UHF modules can be sensitively integrated into the BL ident system without the need for messy equipment ...
|
|
How to debug Turck's pressure sensors
Turck's debugging method for turck pressure sensors is as follows: Using a controller with a 0.08-2MPa plan, requesting a pressure drop to 0.8MPa (down switching value) to announce the contact signal, the operation process is as follows:
Screw the product into the oil ...
|
|
Turck's premium product range is extensive
Sensors can be considered to be almost all areas of industrial automation that provide important information, such as bearing, current, flow rate, temperature, spacing, angle and other information into digital and analog signals. As a pioneer in modern sensor technology, Turck offers a wide range of product lines. ...
|
|
AC and DC contactor interchangeability
1. The AC contactor can replace the DC contactor in an emergency, and the suction time can not exceed 2 hours (because the heat dissipation of the AC coil is worse than the DC coil, which is determined by their different structures).
|
|
Tips for Troubleshooting Electrical Troubleshooting – Turck
1. Understand the circuit principle and determine the maintenance plan: when the electrical system of a piece of equipment is defective, do not rush to disassemble it, first of all, it is necessary to understand the phenomenon, process, planning and cause of the defect of the electrical equipment. Understand the fundamental operating principle of the equipment and electrical system, and analyze the ...
|
|
Turck single- and double-ended cable connectors
Turck has expanded its connector portfolio with the new TXL and TEL series now available in straight or elbow M8 and M12 connectors. In order to meet the different needs of users, we can supply three-pin, four-pin, five-pin straight or elbow plugging ...
|
|
Material classification for displacement sensors – Turck sensors
(1) Conductive plastic displacement sensor
Conductive plastic displacement sensor uses a special process to coat the DAP (didipropylphthalate) resistance paste on the insulating body, heat and polymerize to form a resistance film, or press the DAP resistance powder thermoplastic into the groove of the insulating matrix to form a solid body as a resistor.
|
|
Introduction to the characteristics of Turck's current transformers
The current transformer plays an important role in the electrical, so the requirements for some characteristics of the current transformer are also relatively high, in order to get used to the sensitivity and speed of electrical action.
First, according to the equivalent circuit diagram of the current transformer ...
|
|
Principle of resistance strain gauge of pressure sensor
The operating principle of metal resistance strain gauge is the phenomenon that the resistance value changes due to mechanical deformation due to the strain resistance adsorbed on the matrix data, which is commonly known as the resistance strain effect. The resistance value of a metal conductor can be indicated by the following formula:
where: ρ-- ...
|
|
Turck's principle for selecting proximity switches
1. For different viewing bodies and different viewing distances of different raw materials, different types of Turck proximity switches should be selected to make them have a high performance-to-price ratio in the system, for which the following criteria should be followed in the selection:
...
|
|
Application Notes for Infrared Sensors – Turck
The infrared sensor is a very important part of the infrared detection system, but it is very delicate, and if you are not careful in use, it may cause damage to the infrared sensor. Therefore, the following points should be paid attention to in the application of infrared sensors:
1. Must ...
|
|
Turck Vibration Sensor Selection
The first step is to look at the input quantity, how to see the input amount? Performance targets can be judged by the sensor's range or measurement scale, as well as its overload capacity.
The second step is to look at the static characteristics, the static characteristics are the input signal recorded when static, and the parameters that express the static characteristics mainly include linearity, delay...
|
|
The cause of signal distortion measured by the sensor is Turck
In what ways does the signal fail to manifest Allah? Why is the signal unstable? Generally, the output signal is unstable due to transient temperature changes that cause the bias voltage to fluctuate and fluctuate. How to deal with it? A sensor with a stable bias voltage is used for processing.
...
|
|
Introduction to piezoresistive pressure sensors – Turck
What is the principle of piezoresistive pressure sensors?
Piezoresistive sensors refer to sensors made of the piezoresistive effect of monocrystalline silicon materials and integrated circuit technology. After the monocrystalline silicon data is subjected to the action of force, the resistivity changes, and the proportional force can be obtained according to the measurement circuit.
|
|
Turck's key points for selecting proximity switches
1. For different viewing bodies and different viewing distances of different raw materials, different types of Turck proximity switches should be selected to make them have a high performance-to-price ratio in the system, for which the following criteria should be followed in the selection:
...
|
|
How to use photoelectric switches – Turck
Photoelectric switch is the abbreviation of photoelectric proximity switch, which uses the detection object to block or reflect the beam, and the circuit is turned on by the synchronous loop, and then the presence or absence of the object is detected. Objects are not limited to metal, and all objects that reflect (or block light) can be detected. Light...
|
|
Signal form with different tachometer modes – Turck
A rotational speed sensor is a sensor that converts the rotational speed of a rotating object into an electrical output. Rotational speed sensors are direct measuring devices that can be manufactured by mechanical, electrical, magnetic, optical and hybrid methods.
According to the different signal forms, the speed sensor can be divided into analog and digital ...
|
|
Contact
working hours
