Application Notes for Infrared Sensors – Turck

Turck is expanding its range of distributed power solutions – from pre-cast cables to RFID and I/O modules Turck is expanding its wide range of connection technologies and can now offer a complete range of M12 power supplies ...

1. The equipment itself generally does not need daily maintenance, in the event of obvious problems, please do not open it for self-repair, and contact the manufacturer as soon as possible! 2. In principle, the electrode should be calibrated before each measurement, and the electrode should be calibrated regularly for long-term use. ...

The first type: screw device The method device should be selected quenched steel screws, at the time of the device, the screws are first screwed into about half the length, the screws should be straight with the surface, the sensor should be fixed according to the specified torque, and a layer of grease should be applied to the joint surface.

1. Program selection Before selecting a plan, the given technical indicators should be clarified, such as the scale of the value, the error of the value, the resolution, the repeatability error, the time drift, the temperature drift, the application environment, etc. 2. The selection of core data ...

A linear displacement sensor is an electrical signal device that converts linear mechanical displacement into a linear or arbitrary function relationship through a potentiometer element. The potentiometer planned to complete the measurement of displacement intent must require a confirmation relationship between the change in displacement and the change in resistance. So so...

A tensile pressure sensor is a device that converts a physical signal into a measurable electrical signal output. Precautions for Nala pressure sensors: 1. The appearance of the equipment should be as flat as possible, without oil or film, and the equipment should have sufficient strength and rigidity, ...

The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...

Temperature sensors are widely used in various occupational fields, such as: medical occupations, heavy industry, water treatment, wind power occupations, rail transit, HVAC occupations, energy and environmental protection, food occupations, hydropower stations, petrochemical industry, metallurgical industry, printing and dyeing pharmaceutical and other occupations are used. ...

TURCK analog inductive sensors Turck's analogue inductive sensors enable simple monitoring and control tasks. The sensor is capable of supplying three analog output signals: voltage, current, and frequency. These signals are proportional to the displacement of the object being detected. Lose...

1. Eddy current proximity switch This type of switch is sometimes called an inductive proximity switch. It is the use of conductive objects to produce eddy currents inside the object when approaching the proximity switch that can generate an electromagnetic field. This eddy current reacts to the proximity switch and causes the internal circuit parameters of the switch to change, ...

Since September 2020, Turck has expanded its portfolio of general-purpose products to include 2-wire general-purpose inductive sensors. Since the introduction of the universal 3-wire product, the general-purpose product family has been greatly developed, and the product is now used in various types of customers. Pass...

The FS101 sensor with alphanumeric display continues the operation and commissioning of Turck's FS+ fluid sensor series, which Turck has added to its FS+ fluid sensor series. The new FS+ sensor has the same look and feel, with the same look and feel as all its ...

A sensor is a general term for a device or device that can be measured by rules and converted into a usable output signal according to certain rules, which is generally composed of a sensitive element and a conversion element. When the output of a sensor is a regular gauge signal, it is called a transmitter. ...

A differential pressure sensor is a sensor used to measure the difference between two pressures, and is generally used to measure the pressure difference between the front and rear ends of a certain equipment or component. Typical Applications: It is used to measure the exhaust particle trap (DP ...

(1) After proper appearance, the frequency response value of the turck pressure sensor in Germany is verified under normal atmospheric pressure and standard temperature conditions. (2) Verify the accuracy of the coding of the turck pressure sensor in Germany and the corresponding frequency response signal. ...

1. The scale of the sensor: (1) In normal use (static test or quasi-static test, the frequency of use is not high), the scale of the sensor should be selected to consider the force value of the measurement, but also to consider the weight of the auxiliary thing (test fixture) and so on.

Turck's UNT products detect the orientation of pistons in all standard cylinders, replace most T-slot magnetic sensors on the market today, and can be installed on other cylinder shapes with a wide range of device attachments. It has a compact and compact form factor, which allows it to be fitted ...

The safety relay is a safety loop with all the necessary control parts, which accepts the safety input, and after the internal circuit discrimination, the deterministic output switching signal to the control circuit of the equipment. To put it simply, the safety relays are all two-channel signal type, and only two channel signals are positive.

Fail-safe systems are now an integral part of machinery and plant automation. With the latest complete fail-safe modules, Turck continues to be a driver of distributed automation concepts in these areas and provides support for those who plan to develop a wide range of products in the field of machine hardware and related ...

1. It is forbidden to wire in the state of power on, and strictly wire according to the color on the wiring diagram. 2. The interval between the switch sensing surface and the measured body should be within 80 of the additional action interval to switch the operation firmly. 3. Adjacent switches are generally not suitable for series and parallel use, such as ...